Buy 105237-4870 ZEXEL 9 440 610 192 BOSCH SUPPLY PUMP 9440610192 1052374870 me740325


 

Information supply pump

BOSCH 9 440 610 192 9440610192
ZEXEL 105237-4870 1052374870
MITSUBISHI ME740325 me740325
105237-4870 SUPPLY PUMP
Rating:
18
Buy SUPPLY PUMP 105237-4870 zexel genuine, new aftermarket engine parts with delivery

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below
$109.99
 

16 Aug 2024

CN: A-dormouse
Dormcoo 105237-4870 Hand Oil Transfer Feed Primer Fuel Pump Replacement for ISUZU L019-5
Dormcoo Reference Number: 105237-5280 || Replacement for ISUZU L019-5 || Package: 1pc Fuel Pump || Designed for original devices and replacement applications, Easy and quick installation || If you have any questions, please send us with the frame number VIN Engine Number, and we will provide you with the most correct advice
$109.99
 

16 Aug 2024

CN: A-dormouse
Dormcoo 105237-4870 Fuel Feed Pump Replacement for ISUZU NPR NQR 4HE1 4.8L 1998-2004
Dormcoo Reference Number: 105237-4870 || Replacement for ISUZU NPR NQR 4HE1 4.8L 1998-2004 || Package: 1pc Fuel Pump || Designed for original devices and replacement applications, Easy and quick installation || If you have any questions, please send us with the frame number VIN Engine Number, and we will provide you with the most correct advice

Scheme ###:

1. [1] 152004-3620 PUMP HOUSING
5. [1] 152100-1120 PUMP PLUNGER
6. [1] 152102-0400 COMPRESSION SPRING
7. [1] 152105-1500 CAPSULE
8. [1] 029332-6030 GASKET
10. [1] 152111-4520 TAPPET
14. [4] 152115-0500 VALVE BODY
14. [4] 152115-0500 VALVE BODY
14. [4] 152115-0500 VALVE BODY
15. [4] 152116-0200 COILED SPRING
15. [4] 152116-0200 COILED SPRING
15. [4] 152116-0200 COILED SPRING
16. [2] 152117-0400 CAPSULE
17. [1] 152118-1600 ADAPTOR
18. [3] 029331-6030 GASKET
18. [3] 029331-6030 GASKET
19. [1] 029631-6060 O-RING
20. [1] 152121-0400 LOCKING WASHER
25. [1] 152200-6720 HAND PRIMER
32. [1] 152300-7120 EYE BOLT
36. [2] 029341-4130 GASKET D20&13.8T2*
49. [1] 029731-4570 EYE BOLT
51. [2] 029341-4130 GASKET D20&13.8T2*

Cross reference number

Zexel num
Bosch num
Firm num
Name
105237-4870 
9 440 610 192 
NP-FP/KD-HD 
ME740325  MITSUBISHI
SUPPLY PUMP
A K 14GB FEED PUMP F/P
105237-4870 
9 440 610 192 
NP-FP/KD-HD 
ME731951  MITSUBISHI
SUPPLY PUMP
B K 14GB FEED PUMP F/P




Information:

1. Remove the plug from location (1). Install Tool (A) in the hole with the square end down. Move the governor control to the "ON" position until the rack stops against Tool (A). The racks are now in center (zero) position. 2. Disconnect lines (2) from the fuel injection pumps. Remove washers (3). Put caps on all fuel openings.3. Remove bushing (4) with Tool (B).
When injection pumps, spacers and lifters are removed from the injection pump housing, keep the parts of each pump together so they can be installed back in their original location.
4. Remove fuel injection pump with Tool (C).
Be careful when the injection pumps are disassembled. Do not cause damage to the surface on the plunger. The plunger and barrel for each pump are made as a set. Do not put the plunger of one pump in the barrel of another pump. If one part has wear install a complete new pump assembly. Be careful when the plunger is put into the bore of the barrel.
5. Disassemble the fuel injection pump. Remove ring (6). Make a separation of bonnet (5) from the plunger and barrel assembly (7).
Do not remove the gear from the plunger. The gear and plunger are assembled and adjusted at the factory.
6. Remove the plunger and gear segment, washer and spring from the barrel.7. Remove the ring, spring, collar and valve from the barrel. 8. Remove spacer (8) from the pump bore.Install Fuel Injection Pumps
Make sure the fuel racks are in the center (zero) position before the fuel injection pumps are installed. 1. Put plunger (10), washer (5) and spring (9) in position on barrel (4). Put check valve assembly (7), spring (3) and collar (8) in position in bonnet (6). Connect bonnet (6) and barrel (4) together with ring (2). Keep seal (1) with bonnet for use at installation. 2. Put spacer (13) into position in the pump housing bore. Make sure the correct spacer is with each pump.3. Put the space in gear segment (11) in alignment with the groove in barrel (4). 4. Put the injection pump straight down into the housing bore so the space in gear segment (11) is in alignment with pin (12) and the groove in barrel (4) is in alignment with dowel (14). Use Tool (C) to install the pump. 5. Install the seal and bushing (15) in the pump housing bore. If the pump is in the correct position, bushing (15) will turn into the threads of the pump housing with the fingers until it is even with the housing. Tighten bushing (15) to a torque of 205 14 Nm (150 10 lb ft) with Tool (B).6. Install washers (16).7. Connect the fuel lines to the injection pumps and tighten fuel line nuts to a torque of 40 7 Nm (30 5 lb ft) with Tool (D).8. Check for correct installation of the injection pumps with the engine stopped. See the topic "Installation of Injection Pump" in the Systems

Have questions with 105237-4870?





Group cross 105237-4870 ZEXEL

Mitsubishi 

9 440 610 190 
NP-FP/KD-HD 
ME740040 
SUPPLY PUMP
9 440 610 191 
NP-FP/KD-HD 
ME740007 
SUPPLY PUMP
9 440 610 191 
NP-FP/KD-HD 
ME731633 
SUPPLY PUMP
9 440 610 275 
NP-FP/KD-HD 
ME740064 
SUPPLY PUMP

Isuzu 

9 440 610 828 
NP-FP/KD-P 
1157501650 
SUPPLY PUMP

Mitsubishi 

9 440 610 276 
NP-FP/KD-HD 
ME740059 
SUPPLY PUMP

Isuzu 

9 440 610 315 
NP-FP/KD-PS 
1157501580 
SUPPLY PUMP
9 440 610 316 
1157501630 
SUPPLY PUMP
9 440 610 843 
NP-FP/KD-PS 
1157501630 
SUPPLY PUMP
9 440 610 843 
NP-FP/KD-PS 
1157501641 
SUPPLY PUMP

Mitsubishi 

105237-4870  
9 440 610 192 
NP-FP/KD-HD 
ME740325 
SUPPLY PUMP
105237-4870  
9 440 610 192 
NP-FP/KD-HD 
ME731951 
SUPPLY PUMP
 
 

Mitsubishi 

9 440 610 193 
NP-FP/KD-HD 
ME740341 
SUPPLY PUMP
Back to top