105217-1331 ZEXEL 9 440 610 060 BOSCH SUPPLY PUMP 9440610060 1052171331 0424500110


 

Information supply pump

BOSCH 9 440 610 060 9440610060
ZEXEL 105217-1331 1052171331
MITSUBISHI-HEAV 0424500110 0424500110
105217-1331 SUPPLY PUMP
Rating:
67
Buy SUPPLY PUMP 105217-1331 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

1. [1] 152000-4620 PUMP HOUSING
5. [1] 152100-1120 PUMP PLUNGER
6. [1] 152102-0400 COMPRESSION SPRING
7. [1] 152105-1500 CAPSULE
8. [1] 029332-6030 GASKET
10. [1] 152111-3221 TAPPET
10/2. [1] 152112-0500 ROLLER
10/3. [1] 152113-1000 BEARING PIN
10/4. [2] 152114-1600 SLIDER
14. [2] 152115-0200 VALVE BODY
14. [2] 152115-0200 VALVE BODY
15. [2] 152116-0200 COILED SPRING
15. [2] 152116-0200 COILED SPRING
16. [1] 152117-0400 CAPSULE
18. [2] 029331-6030 GASKET
18. [2] 029331-6030 GASKET
20. [1] 152121-0200 LOCKING WASHER
25. [1] 152200-5620 HAND PRIMER
30. [1] 152300-0120 EYE BOLT
32. [1] 029731-4080 EYE BOLT
35. [3] 029341-4130 GASKET D20&13.8T2*
36. [2] 029341-4130 GASKET D20&13.8T2*

Cross reference number

Zexel num
Bosch num
Firm num
Name
105217-1331 
9 440 610 060 
NP-FP/K-P 
0424500110  MITSUBISHI-HEAV
SUPPLY PUMP
K 14GC FEED PUMP F/P
105217-1331 
9 440 610 060 
NP-FP/K-P 
0424500111  MITSUBISHI-HEAV
SUPPLY PUMP
A K 14GC FEED PUMP F/P
105217-1331 
9 440 610 060 
NP-FP/K-P 
H8165C010AFA  M.BISHI-HI.-NAG
SUPPLY PUMP
K 14GC FEED PUMP F/P




Information:

The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
This Program must be administered as soon as possible. When reporting the repair, use "PI3841" as the Part Number, "7751" as the Group Number, "56" as the Warranty Claim Description Code and "T" as the SIMS Description Code. Exception: If the repair is done after failure, use "PI3841" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code.
Completion Date
July 31, 1996Termination Date
January 31, 1997Problem
Shot peening on some 3500 Diesel Cylinder Heads extends too far into the injector bore. This may cause the top injector o-ring to be cut or torn on installation.
Affected Product
Model & Identification Number
777C (4XJ844, 4XJ846-872, 4XJ879, 4XJ883, 4XJ885)
785B (6HK483-489)
789B (7EK355-364, 7EK367)
793B (1HL359-367)
3512 (1LM67-73 4WJ649 )
3512B (8RM126-129 4TN40 )
3516 (4XF605, 4XF606 5SJ392-397 2PK918 )
3516B (8CN134 8KN69 , 8KN70 7RN253-259 )
Parts Needed
Dealers will need to order parts for this Program.
1 - 8J8725 Seal-O-Ring (per cylinder)1 - 8T7767 Wheel-Level (per engine)1 - 8T7768 Mandrel (per engine)Action Required
1. Remove the valve cover, rocker arm assembly and fuel injector.2. Inspect the top injector o-ring seal for damage. If damaged, polish the upper injector bore area using an 8T7767 Polishing Wheel and an 8T7768 Mandrel. Install a new 8J8725 O-Ring Seal on each injector.3. Install the injector using clean engine oil in the injector bore and on the o-rings.4. Install rocker arm assembly and reset valves and injector. Install valve covers.Owner Notification
U.S. and Canadian owners will receive the attached Owner Notification.
Service Claim Allowances
Parts Disposition
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.
Attach.(1-Owner Notification)Copy Of Owner Notification For U.s. And Canadian Owners

Have questions with 105217-1331?





Group cross 105217-1331 ZEXEL

Mitsubishi 

9 440 610 782 
NP-FP/K22PC47/3NP13 
0424500110 
SUPPLY PUMP
9 440 610 782 
NP-FP/K22PC47/3NP13 
0424500110 
SUPPLY PUMP

Mitsubishi-Heav 

105217-1331  
9 440 610 060 
NP-FP/K-P 
0424500110 
SUPPLY PUMP
105217-1331  
9 440 610 060 
NP-FP/K-P 
0424500111 
SUPPLY PUMP

M.Bishi-Hi.-Nag 

105217-1331  
9 440 610 060 
NP-FP/K-P 
H8165C010AFA 
SUPPLY PUMP
Back to top