105217-1330 ZEXEL 9 440 610 782 BOSCH SUPPLY PUMP 9440610782 1052171330 0424500110


 

Information supply pump

BOSCH 9 440 610 782 9440610782
ZEXEL 105217-1330 1052171330
MITSUBISHI 0424500110 0424500110
105217-1330 SUPPLY PUMP
Rating:
65
Buy SUPPLY PUMP 105217-1330 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
105217-1330 
9 440 610 782 
NP-FP/K22PC47/3NP13 
0424500110  MITSUBISHI
SUPPLY PUMP
K 14GC FEED PUMP F/P
105217-1330 
9 440 610 782 
NP-FP/K22PC47/3NP13 
0424500110   
SUPPLY PUMP
K 14GC FEED PUMP F/P




Information:

Problem
The fuel injection pumps used on certain Remanufactured 1160 and 3208 Engines need to be inspected for gummy deposits.
Affected Product
Model & Identification Number
1160 (57V1-34485)
3208 (9WC1-1093), (5CD1-9736), (62W1-76455), (93Z1-10198)
Parts Stock Remanufactured Fuel Pump Part Numbers
This program applies only to pumps in parts stock with a date code prior to November, 1993 (UUDE). Date codes are in the MM/YY mode with the standard notation of NUMBERALKOD.
Parts Needed
Not applicable.
Action Required
Before installing or delivering any of the Affected Product, perform the following steps to ensure the internal fuel injection pump components are not stuck due to fuel pump gumming:
1. Remove the top cover of the fuel injection pump and check to ensure that all sleeves and levers are free and there are no gummy deposits on any of these components.2. If inspection performed in Step 1 indicates everything is clean, install top cover and return to parts stock.3. If inspection reveals components have gummy deposits, remove 12 ounces of fuel from the fuel pump housing and replace it with:-Fuel Injector Cleaner
or
-Carburetor/Choke Cleaner
4. Allow the components to soak in cleaning solution for 45 minutes. Then, rotate the engine crankshaft to rotate the fuel injection pump and check for free movement of the lever and sleeve (on pumps only, rotate the fuel pump camshaft). This will ensure the components have the gummy deposits removed.5. If the above procedures do not free the pump assembly, remove the individual pumps from the pump housing, clean them with cleaning solution, and install them back into the housing.6. If the engine or fuel pump will be used immediately, install the cover on the fuel injection pump, and install or deliver the engine or pump.7. If the engine or fuel pump will be returned to stock, DO NOT leave the fuel injection pump full of cleaning solution because it may not contain any rust inhibitors. Remove the cleaning solution, fill the fuel injector pump with clean diesel fuel, and install the cover on the pump.Service Claim Allowances
The inspection of the pump is a .5-hour job. If the pump needs to be cleaned, an additional .5 hour may be claimed. If the individual pumps need to be removed from the pump housing for cleaning, up to an additional 1.5 hours may be claimed.
US and Canadian Dealers Only - When submitting a claim for a fuel pump in Parts Stock, use 99Z00007 in the Product Identification Number Field.
Parts Disposition
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.

Have questions with 105217-1330?





Group cross 105217-1330 ZEXEL

Mitsubishi 

105217-1330  
9 440 610 782 
NP-FP/K22PC47/3NP13 
0424500110 
SUPPLY PUMP
105217-1330  
9 440 610 782 
NP-FP/K22PC47/3NP13 
0424500110 
SUPPLY PUMP

Mitsubishi-Heav 

9 440 610 060 
NP-FP/K-P 
0424500110 
SUPPLY PUMP
9 440 610 060 
NP-FP/K-P 
0424500111 
SUPPLY PUMP

M.Bishi-Hi.-Nag 

9 440 610 060 
NP-FP/K-P 
H8165C010AFA 
SUPPLY PUMP
Back to top