Information supply pump
BOSCH
9 440 610 100
9440610100
ZEXEL
105210-5250
1052105250
MITSUBISHI
ME730303
me730303

Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Fuel Feed Pump 105210-5250 ME730303 for Mitsubishi Engine 6D34
ADPelcote Part number:105210-5250 || Applications:for Mitsubishi Engine 6D34
ADPelcote Part number:105210-5250 || Applications:for Mitsubishi Engine 6D34
BCXFORK Fuel Pump ME730303 105210-5250 fits for Mitsubishi Engine 6D34
BCXFORK [IMPORTANT] Please make sure your old part number matches the one in the listing before placing an order. We ship based on the part number in the listing. If you're unsure if this product fits your vehicle, please provide the part number and a picture of your old starter for verification. || Part Number: ME016139,ME730303,105210-5250,1052105250 || This item fits for Mitsubishi Engine:6D34 || package include: fuel pump
BCXFORK [IMPORTANT] Please make sure your old part number matches the one in the listing before placing an order. We ship based on the part number in the listing. If you're unsure if this product fits your vehicle, please provide the part number and a picture of your old starter for verification. || Part Number: ME016139,ME730303,105210-5250,1052105250 || This item fits for Mitsubishi Engine:6D34 || package include: fuel pump
Dormcoo 105210-5250 ME730303 Fuel Feed Pump Replacement for Mitsubishi 6D34 6D34T Engine
Dormcoo Reference Number: 105210-5250 ME730303 || Replacement for Yanmar 4TNE84 TK482 Isuzu D201 DT2.2 Diesel Engine || Package: 1pc Fuel Pump || Designed for original devices and replacement applications, Easy and quick installation || If you have any questions, please send us with the frame number VIN Engine Number, and we will provide you with the most correct advice
Dormcoo Reference Number: 105210-5250 ME730303 || Replacement for Yanmar 4TNE84 TK482 Isuzu D201 DT2.2 Diesel Engine || Package: 1pc Fuel Pump || Designed for original devices and replacement applications, Easy and quick installation || If you have any questions, please send us with the frame number VIN Engine Number, and we will provide you with the most correct advice
You can express buy:
Images:
USD 94.05
[10-Nov-2022]
Scheme ###:
1. | [1] | 152051-0620 | PUMP HOUSING |
5. | [1] | 152100-1120 | PUMP PLUNGER |
6. | [1] | 152102-0400 | COMPRESSION SPRING |
7. | [1] | 152105-1500 | CAPSULE |
8. | [1] | 029332-6030 | GASKET |
10. | [1] | 152111-2820 | TAPPET |
10/2. | [1] | 152112-0100 | ROLLER |
10/3. | [1] | 152113-0700 | BEARING PIN |
10/4. | [2] | 152114-0400 | SLIDER |
14. | [2] | 152115-0200 | VALVE BODY |
14. | [2] | 152115-0200 | VALVE BODY |
15. | [2] | 152116-0200 | COILED SPRING |
15. | [2] | 152116-0200 | COILED SPRING |
16. | [1] | 152117-0100 | CAPSULE |
18. | [2] | 029331-6030 | GASKET |
18. | [2] | 029331-6030 | GASKET |
20. | [1] | 152121-0200 | LOCKING WASHER |
25. | [1] | 152200-5620 | HAND PRIMER |
30. | [1] | 152300-6920 | EYE BOLT |
32. | [1] | 139814-2200 | EYE BOLT |
35. | [2] | 029341-4130 | GASKET D20&13.8T2* |
36. | [2] | 029341-4130 | GASKET D20&13.8T2* |
Include in #1:
101602-1430
as SUPPLY PUMP
Cross reference number
Zexel num
Bosch num
Firm num
Name
Information:
Fig. 4-Axial Bearing Movement CheckFasten dial indicator to turbine housing so that the indicator tip rests on the end of the shaft (Fig. 4).Move the shaft back and forth axially by hand. The total axial movement of the shaft should be 0.001 to 0.004 in. (0.03 to 0.10 mm). If not repair or replace unit.Repair
As each part is removed, place it in a clean protective container.Refer to Fig. 6 for part identification and relationship.
Fig. 5-Turbine Housing RemovalScribe a line on the mating surfaces of the turbine housing (1, Fig. 5) and center housing (2) to aid in alignment during reassembly.Remove the turbine housing-to-center housing cap screws (5, Fig. 5), lock plates (3), and clamps (4). Carefully remove turbine housing.
Fig. 6-Turbocharger Exploded View
Fig. 7-Removing Compressor (Impeller)Mount a suitable holding fixture (1, Fig. 7) (see Group 0499 Special Tools - Turbocharger) in a vise.Insert the turbine wheel into the fixture.Use a double universal socket to remove the compressor wheel retaining nut to avoid possible bending of the shaft.Remove the impeller (2, Fig. 7) from the shaft.
Fig. 8-Shaft and Wheel AssemblyRemove the turbine wheel and shaft assembly (3, Fig. 8) from the center housing keeping it centered until it is clear of the housing. Fig. 8 shows the turbine wheel assembly (1). The piston ring (2) can now be removed.Remove the back plate to center housing cap screw (16, Fig. 6) and lock plates (15).Carefully remove back plate by tapping with a soft mallet.
Fig. 9-Back Plate Assembly IMPORTANT: Back plate (2, Fig. 9) and the spring (1) are sold only as an assembly. The installed depth of the spring is a controlled dimension. Therefore, do not remove or replace the spring by itself. Cleaning can be done without removing the spring from the back plate.
Fig. 10-Removing Thrust Collar and Thrust WasherRemove the thrust collar (2, Fig. 10) and thrust washer (3) as shown in Fig. 10. Remove the O-ring (1) from housing and piston ring (4) from thrust collar.
Fig. 11-Retaining Ring and Bearing RemovalRemove retaining rings (2, Fig. 11) with a No. 501 Waldes Truarc Snap Ring Pliers, if snap rings are used, and bearings (1) from both sides of the center housing.Cleaning
Before cleaning, inspect parts for signs of burning, rubbing, or other damage which might not be evident after cleaning.Soak all parts in clean carbon solvent for approximately 25 minutes. After soaking use a stiff bristle brush to remove all dirt particles. Dry parts thoroughly. Normally, a light accumulation of carbon deposits will not affect turbine wheel operation.Inspection
Replace the following parts: O-ring (13, Fig. 6), lock plates (6, 15, and 21) piston rings (8 and 18), retaining rings (11), and all damaged nuts and bolts. If bearings and thrust washers show signs of nicks, scores, shellac deposits, or foreign material embedment, replace them.After cleaning, if any of the parts in the assembly show signs of rubbing, scoring, scratches, or seizure, replace them.Assembly
Be sure each part is clean before assembling. As parts are assembled, cover openings to prevent entry of dirt