105207-1570 ZEXEL 9 440 610 175 BOSCH SUPPLY PUMP 9440610175 1052071570


 

Information supply pump

BOSCH 9 440 610 175 9440610175
ZEXEL 105207-1570 1052071570
105207-1570 SUPPLY PUMP
Rating:
86
Buy SUPPLY PUMP 105207-1570 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

1. [1] 152051-1820 PUMP HOUSING
5. [1] 152100-1120 PUMP PLUNGER
6. [1] 152102-0400 COMPRESSION SPRING
7. [1] 152105-1500 CAPSULE
8. [1] 029332-6030 GASKET
10. [1] 152111-3221 TAPPET
10/2. [1] 152112-0500 ROLLER
10/3. [1] 152113-1000 BEARING PIN
10/4. [2] 152114-1600 SLIDER
14. [2] 152115-0500 VALVE BODY
14. [2] 152115-0500 VALVE BODY
15. [2] 152116-0200 COILED SPRING
15. [2] 152116-0200 COILED SPRING
16. [1] 152117-0620 CAPSULE
18. [2] 029631-6060 O-RING
20. [1] 152121-0200 LOCKING WASHER
25. [1] 152200-5420 HAND PRIMER
26. [1] 152207-2300 ADAPTOR
27. [1] 029631-6060 O-RING
30. [1] 152300-7120 EYE BOLT
32. [1] 029731-4570 EYE BOLT
35. [2] 029341-4130 GASKET D20&13.8T2*
36. [2] 029341-4130 GASKET
47. [1] 152325-0200 EYE BOLT
48. [1] 029331-6040 GASKET

Include in #1:

106651-4050 as SUPPLY PUMP

Cross reference number

Zexel num
Bosch num
Firm num
Name
105207-1570 
9 440 610 175 
NP-FP/K-P 
   
SUPPLY PUMP
K 14GC FEED PUMP F/P




Information:

Location of Components
Illustration 1 g06494607
Typical example
(A) DEF tank breather
(B) Heater relay
(C) DEF fast fill tank-mounted valve
(D) Plug heater
(E) Heated supply line
(F) DEF fast fill receiver
(G) DEF tank
Illustration 2 g06494608
(C) DEF fast fill tank-mounted valveThe ground level DEF fill system works much like the ground level fast fuel system. DEF fast fill tank-mounted valve (C) is mounted in DEF tank (G). Fast fill tank-mounted valve (C) has a piston that is normally closed with a spring.
Illustration 3 g06516649
(H) O-Ring seal
(J) Flow In
(K) Flow Out
(L) Back cavityNote: O-Ring seal (H) allows small amount of fluid flow.Note: The main flow through the valve is not shown.Note: During normal flow conditions there is no pressure built up in back cavity (L). Back cavity (L) is essentially "open to atmosphere".When filling, the DEF flow opens the piston, past the diverter shield and a portion flows through an orifice in the piston into the float area.
Illustration 4 g06516652
(L) Back cavity
(M) Rolling diaphragm
(N) O-Ring seal
(P) Drain holeNote: O-Ring seal (N) prevents any flow from back cavity (L).Note: Once the float rises, the pressure in back cavity (L) equals the pressure pushing the front of rolling diaphragm (M). Since the area behind rolling diaphragm (M) is greater than the area in front, along with the spring force, diaphragm (M) is held shut.When the tank level causes the float to rise high enough, the orifice is blocked, causing increased pressure on the piston until valve (C) closes. The increased pressure in the fill line then causes the nozzle attached to the receiver to shut off.The nozzle shuts off when the nozzle sees 172 to 200 kPa (25 to 29 psi) resistance. If pressure is not great enough from the source pump/supply at nozzle, there is not enough pressure built up in line between valve and nozzle to trigger nozzle shut off and DEF exits the breather-overfill.Targeted flow for the DEF supply pump should be 45 L/min (12 US gpm). Excessive flow can lead to premature shut-off of DEF nozzle.DEF tank valve (C), supply line (E), and DEF fast fill receiver (F) are electrically heated based on ambient temperature, battery, and alternator loads controlled through heater relay (B). For heated DEF hose repair kit, refer to Service Magazine, M0103829, "Repair Kits for Quick Connect Diesel Exhaust Fluid (DEF) Line Fittings Are Now Available for Certain Cat® Machine Engines".Note: If receiver (F) and supply line (E) on machine are drained for storage, the system must be refilled via the ground fill connection. The system is refilled to ensure that plug heater (D) in receiver (F) remains submerged in DEF fluid during the heating operation.
Plug heater (D) probe must be submerged at least 80% in DEF fluid to prevent overheating that could lead to plug heater (D) failing.

Have questions with 105207-1570?





Group cross 105207-1570 ZEXEL

Hino 

9 440 610 214 
NP-FP/K-P 
225602180A 
SUPPLY PUMP
 
 

9 440 610 579 
NP-FP/K-PS 
 
SUPPLY PUMP
9 440 610 707 
NP-FP/K-PS 
 
SUPPLY PUMP
9 440 610 580 
NP-FP/K-PS 
 
SUPPLY PUMP
9 440 610 969 
NP-FP/K-P 
 
SUPPLY PUMP
9 440 610 581 
NP-FP/K-P 
 
SUPPLY PUMP
105207-1570  
9 440 610 175 
NP-FP/K-P 
 
SUPPLY PUMP
9 440 610 572 
NP-FP/K-P 
 
SUPPLY PUMP
 
 

Back to top