Information supply pump
BOSCH
9 440 610 090
9440610090
ZEXEL
105207-1390
1052071390

Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Scheme ###:
1. | [1] | 152004-1620 | PUMP HOUSING |
5. | [1] | 152100-1120 | PUMP PLUNGER |
6. | [1] | 152102-2100 | COMPRESSION SPRING |
7. | [1] | 152105-1500 | CAPSULE |
8. | [1] | 029332-6030 | GASKET |
10. | [1] | 152111-4020 | TAPPET |
10/2. | [1] | 152112-0500 | ROLLER |
10/3. | [1] | 152113-1000 | BEARING PIN |
10/4. | [2] | 152114-1700 | SLIDER |
14. | [2] | 152115-0500 | VALVE BODY |
14. | [2] | 152115-0500 | VALVE BODY |
15. | [2] | 152116-0200 | COILED SPRING |
15. | [2] | 152116-0200 | COILED SPRING |
16. | [1] | 152117-0400 | CAPSULE |
18. | [1] | 029631-6060 | O-RING |
19. | [1] | 029331-6030 | GASKET |
20. | [1] | 152121-0200 | LOCKING WASHER |
25. | [1] | 152200-5320 | HAND PRIMER |
30. | [1] | 152300-3620 | EYE BOLT |
32. | [1] | 029731-4680 | EYE BOLT |
33. | [1] | 029711-4430 | INLET UNION |
35. | [2] | 029341-4130 | GASKET D20&13.8T2* |
35. | [2] | 029341-4130 | GASKET D20&13.8T2* |
36. | [2] | 029341-4130 | GASKET D20&13.8T2* |
42. | [1] | 152320-0100 | COVER |
Cross reference number
Zexel num
Bosch num
Firm num
Name
Information:
Table 1
Repair Kit Part Numbers for Quick Connect DEF Line Fittings
473-2053 5/16"-90 Degree Kit
473-2055 5/16"- Straight Kit
473-2056 3/8"-90 Degree Kit
473-2057 3/8"- Straight Kit Rework Procedure
Table 2
Required Tools
Part Number Part Name
1U-7648 Tube Cutter
Illustration 1 g06433660
Cut the connector end on the corrugated section with the cutter.
Illustration 2 g06433665
Cut the two wires with a tie cutter.
Illustration 3 g06433668
Use a knife or sharp blade to cut the outer sheathing off. Ensure not to cut or damage the inner fluid hose.
Illustration 4 g06433669
Install the hose clamp provided first before installing the connector. Use appropriate size (3/8th or 5/16th) and type (90 degree or straight) fitting.
Illustration 5 g06433672
Fasten the clamp until the two jaws are either in contact or about 2 to 3 mm (0.08 to 0.1 inch) apart.