105207-1350 ZEXEL 9 440 610 104 BOSCH SUPPLY PUMP 9440610104 1052071350


 

Information supply pump

BOSCH 9 440 610 104 9440610104
ZEXEL 105207-1350 1052071350
105207-1350 SUPPLY PUMP
Rating:
60
Buy SUPPLY PUMP 105207-1350 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

1. [1] 152004-1620 PUMP HOUSING
5. [1] 152100-1120 PUMP PLUNGER
6. [1] 152102-1600 COMPRESSION SPRING
7. [1] 152105-1500 CAPSULE
8. [1] 029332-6030 GASKET
10. [1] 152111-3221 TAPPET
14. [2] 152115-0500 VALVE BODY
14. [2] 152115-0500 VALVE BODY
15. [2] 152116-0200 COILED SPRING
15. [2] 152116-0200 COILED SPRING
16. [1] 152117-0400 CAPSULE
18. [1] 029331-6030 GASKET
19. [1] 029631-6060 O-RING
20. [1] 152121-0200 LOCKING WASHER
25. [1] 152200-5320 HAND PRIMER
30. [1] 152300-3620 EYE BOLT
32. [1] 029731-4680 EYE BOLT
33. [1] 029711-4430 INLET UNION
35. [2] 029341-4130 GASKET D20&13.8T2*
35. [2] 029341-4130 GASKET D20&13.8T2*
36. [2] 029341-4130 GASKET D20&13.8T2*
42. [1] 152320-0100 COVER

Cross reference number

Zexel num
Bosch num
Firm num
Name
105207-1350 
9 440 610 104 
NP-FP/K-P 
   
SUPPLY PUMP
K 14GC FEED PUMP F/P




Information:

Reference for 3500 Series Engines
Troubleshooting, M0080819, "3516E Engine for Tier 4 Final 994K Wheel Loaders".Testing and Adjusting, M0080815, "3516E Engine for Tier 4 Final 994K Wheel Loaders".Disassembly and Assembly, M0092351, "3516E Engines for Caterpillar Built Machines".Procedure
Note: If failed parts need to be shipped back, please cap off the ports using the caps from the new part.
What code are you troubleshooting? ____________________
Follow the correct troubleshooting procedure. Refer to "Reference for C175 Engines" and "Reference for 3500 Series Engines" Sections for correct media number to use.
When troubleshooting procedure requests the DEF quality check, DEF system inspection filter replacement or dosing accuracy, document those results in Table 1, Table 2, Table 3, and Table 4.
Table 1
DEF Quality Results
Step Instruction Completed (Yes/No) Result Comments Units
1 Follow the Testing and Adjusting procedure for "Diesel Exhaust Fluid Quality - Test"
2 DEF Contamination Test (include photo of test strip is possible) Pass/Fail
3 DEF concentration Test % at 20° C (68° F)
Table 2
DEF Tank Vent Line, Breather, and Cap Inspection Results
Step Instruction Completed (Yes/No) Result Comments Units
1 Follow the Testing and Adjusting procedure for "Diesel Exhaust Fluid Quality - Test"
2 DEF Contamination Test (include photo of test strip is possible)
3 DEF concentration Test
4 Remove the breather and inspect at the breather-to-vent line connections if debris is bypassing the breather (take photo)
5 Inspect the DEF tank manual fill cap for damage or debris (take photo)
6 Remove the DEF tank manual fill cap and inspect for damage or debris at the manual fill inlet to the tank (take a photo)
7 Remove the fill neck strainer and inspect for damage or debris (take a photo)
8 Clean or replace the strainer (if necessary) (take a photo)
Table 3
DEF Pump Filters Replaced
Step Instruction Completed (Yes/No) Result Comments Units
1 Prior to removal, inspect the DEF pump suction line fitting and DEF pump filter cap for any damage (take a photo)
2 Replace the DEF pump suction line filter fitting and DEF pump filter on the affected DEF pump. Comment on any notable damage or debris (take a photo of each post removal)
3 Bag, label (pump number in PETU, pump serial number, date removed), and return with pump.
Table 4
Dosing Accuracy Test
Step Instruction Completed (Yes/No) Result Comments Units
1 Follow the Testing and Adjusting, Aftertreatment SCR system Dosing Test.
2 For the pump in question, take a photograph of both DEF injectors, mounts, gaskets, bolts on the SCR inlet prior to removal. Ensure that the picture captures the DEF injector serial number and part number and not which position and which aftertreatment it was installed.
3 For the pump in question, remove both injectors from the SCR inlet.
4 Take a photograph of both DEF injector mounts on the SCR inlet and the tip of both DEF injectors.
5 Install each injector on the beaker.
6 Run the DEF System Dosing Accuracy test through Cat® ET for each injector.
7 Use the beaker to measure the amount of fluid from the dosing test for each injector. ____________________ml
____________________ml
8 Repeat the test for each injector to verify consistency.

Have questions with 105207-1350?





Group cross 105207-1350 ZEXEL

 
 
SUPPLY PUMP
9 440 610 103 
NP-FP/K-P 
 
SUPPLY PUMP

Mitsubishi 

9 440 610 560 
NP-FP/K-P 
ME716948 
SUPPLY PUMP
9 440 610 560 
NP-FP/K-P 
ME098517 
SUPPLY PUMP

Mitsubishi-Heav 

9 440 610 247 
NP-FP/K-PS 
3256506010 
SUPPLY PUMP

Mitsubishi 

9 440 610 398 
NP-FP/K-P 
ME722282 
SUPPLY PUMP
9 440 610 402 
NP-FP/K-P 
 
SUPPLY PUMP
105207-1350  
9 440 610 104 
NP-FP/K-P 
 
SUPPLY PUMP
9 440 610 956 
NP-FP/K-P 
 
SUPPLY PUMP

Isuzu 

9 440 610 091 
NP-FP/K-PS 
1157500800 
SUPPLY PUMP
9 440 610 091 
NP-FP/K-PS 
1157500760 
SUPPLY PUMP

Mitsubishi-Heav 

9 440 610 091 
NP-FP/K-PS 
3256506090 
SUPPLY PUMP

Mitsubishi 

9 440 610 864 
NP-FP/K-P 
ME723149 
SUPPLY PUMP
9 440 610 864 
NP-FP/K-P 
ME723015 
SUPPLY PUMP
9 440 610 090 
NP-FP/K-PS 
 
SUPPLY PUMP
Back to top