105207-1340 ZEXEL 9 440 610 402 BOSCH SUPPLY PUMP 9440610402 1052071340


 

Information supply pump

BOSCH 9 440 610 402 9440610402
ZEXEL 105207-1340 1052071340
105207-1340 SUPPLY PUMP
Rating:
59
Buy SUPPLY PUMP 105207-1340 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

1. [1] 152004-1620 PUMP HOUSING
5. [1] 152100-1120 PUMP PLUNGER
6. [1] 152102-1600 COMPRESSION SPRING
7. [1] 152105-1500 CAPSULE
8. [1] 029332-6030 GASKET
10. [1] 152111-3221 TAPPET
10/2. [1] 152112-0500 ROLLER
10/3. [1] 152113-1000 BEARING PIN
10/4. [2] 152114-1600 SLIDER
14. [2] 152115-0500 VALVE BODY
14. [2] 152115-0500 VALVE BODY
15. [2] 152116-0200 COILED SPRING
15. [2] 152116-0200 COILED SPRING
16. [1] 152117-0400 CAPSULE
18. [1] 029331-6030 GASKET
19. [1] 029631-6060 O-RING
20. [1] 152121-0200 LOCKING WASHER
25. [1] 152200-5320 HAND PRIMER
30. [1] 152300-3620 EYE BOLT
32. [1] 029731-4680 EYE BOLT
33. [1] 029711-4310 INLET UNION
35. [2] 029341-4130 GASKET D20&13.8T2*
36. [2] 029341-4130 GASKET D20&13.8T2*
42. [1] 152320-0100 COVER

Include in #1:

106692-4532 as SUPPLY PUMP

Cross reference number

Zexel num
Bosch num
Firm num
Name
105207-1340 
9 440 610 402 
NP-FP/K-P 
   
SUPPLY PUMP
K 14GC FEED PUMP F/P




Information:


Personal injury can result from improper handling of chemicals.Make sure you use all the necessary protective equipment required to do the job.Make sure that you read and understand all directions and hazards described on the labels and material safety data sheet of any chemical that is used.Observe all safety precautions recommended by the chemical manufacturer for handling, storage, and disposal of chemicals.
C175 Engine References
Reference: Troubleshooting, M0069788, "C175 Tier 4 Final Engines for Off-Highway Trucks"Reference: Testing and Adjusting, M0069782, "C175 Tier 4 Final Engines for Off-Highway Trucks"Reference: Disassembly and Assembly, M0080117, "C175 Tier 4 Final Engines for Caterpillar Built Machines"3500 Engine References
Reference: Troubleshooting, M0080819, "3516E Engine for Tier 4 Final 994K Wheel Loaders"Reference: Testing and Adjusting, M0080815, "3516E Engine for Tier 4 Final 994K Wheel Loaders"Reference: Disassembly and Assembly, M0092351, "3516E Engines for Caterpillar Built Machines"Procedure
Note: If failed parts need to be shipped back, please cap off the ports using the caps from the new part.
The DEF injector troubleshooting return form is required and included with failed part returns documenting what was found that led to DEF injector replacement. Attach photos of the DEF injector tip and the mount area along with a Product Status Report to the Service Information Management System claim.
Determine the diagnostic code. ____________________
Troubleshoot the code found using the appropriate troubleshooting manual.
When the troubleshooting procedure requests the DEF quality check, DEF injector resistance measurement, or Dosing Accuracy Test, document the results in Tables 1, 2, and 3.
Table 1
DEF Quality Results
Step Instruction Completed (Yes/No) Units
1 Follow the Testing and Adjusting procedure for "Diesel Exhaust Fluid Quality - Test"
2 DEF Contamination Test (include photo of test strip if possible)
3 DEF Concentration Test
% at 20° C (68° F)
Illustration 1 g06371891
Diesel Exhaust Fluid (DEF) Injector Resistance Measurement
Table 2
Injector Resistance Measurement
Step Instruction Completed (Yes/No) Units
1 Turn the keyswitch to the OFF position. Allow 2 minutes to elapse before proceeding.
2 Disconnect the DEF injector from the applicable harness.
3 Inspect the connector for damage or debris (if damaged take photo).
4 Measure the temperature of the injector (aluminum body). ° C (° F)
5 Connect 2 of the 398-4987 Probe to the DEF injector. The connectors must be used to prevent damage to the DEF injector connector.
6 Measure the resistance of the DEF injector.
Ohms
Table 3
Dosing Accuracy Test
Step Instruction Completed (Yes/No) Units
1 Follow the Testing and Adjusting, Aftertreatment SCR System Dosing - Test.
2 Take a photograph of the DEF injector mount, gasket, and bolts on the SCR inlet prior to removal.
3 Remove the injector from the SCR inlet.
4 Take a photograph of the DEF injector mount on the SCR inlet and the tip of the DEF injector. ° C (° F)
5 Run the DEF System Dosing Accuracy test through Cat ET.
6 Use a beaker to measure the amount of fluid from the dosing test. mL (oz)
7 Repeat the test to verify consistency.
mL (oz)
8 Install the injector back onto the SCR Inlet if instructed per the Troubleshooting Guide Results/Comments
____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Have questions with 105207-1340?





Group cross 105207-1340 ZEXEL

 
 
SUPPLY PUMP
9 440 610 103 
NP-FP/K-P 
 
SUPPLY PUMP

Mitsubishi 

9 440 610 560 
NP-FP/K-P 
ME716948 
SUPPLY PUMP
9 440 610 560 
NP-FP/K-P 
ME098517 
SUPPLY PUMP

Mitsubishi-Heav 

9 440 610 247 
NP-FP/K-PS 
3256506010 
SUPPLY PUMP

Mitsubishi 

9 440 610 398 
NP-FP/K-P 
ME722282 
SUPPLY PUMP
105207-1340  
9 440 610 402 
NP-FP/K-P 
 
SUPPLY PUMP
9 440 610 104 
NP-FP/K-P 
 
SUPPLY PUMP
9 440 610 956 
NP-FP/K-P 
 
SUPPLY PUMP

Isuzu 

9 440 610 091 
NP-FP/K-PS 
1157500800 
SUPPLY PUMP
9 440 610 091 
NP-FP/K-PS 
1157500760 
SUPPLY PUMP

Mitsubishi-Heav 

9 440 610 091 
NP-FP/K-PS 
3256506090 
SUPPLY PUMP

Mitsubishi 

9 440 610 864 
NP-FP/K-P 
ME723149 
SUPPLY PUMP
9 440 610 864 
NP-FP/K-P 
ME723015 
SUPPLY PUMP
9 440 610 090 
NP-FP/K-PS 
 
SUPPLY PUMP
Back to top