105207-1090 ZEXEL SUPPLY PUMP Cross 1052071090 225601500a


 

Information supply pump

ZEXEL 105207-1090 1052071090
HINO 225601500A 225601500a
105207-1090 SUPPLY PUMP
Rating:
29
Buy SUPPLY PUMP 105207-1090 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

1. [1] 152000-4620 PUMP HOUSING
5. [1] 152100-1120 PUMP PLUNGER
6. [1] 152102-0400 COMPRESSION SPRING
7. [1] 152105-0200 CAPSULE
8. [1] 029332-6030 GASKET
10. [1] 152111-3221 TAPPET
14. [2] 152115-0100 VALVE BODY
14. [2] 152115-0100 VALVE BODY
15. [2] 152116-0200 COILED SPRING
15. [2] 152116-0200 COILED SPRING
16. [1] 152117-0400 CAPSULE
18. [2] 029331-6030 GASKET
18. [2] 029331-6030 GASKET
20. [1] 152121-0200 LOCKING WASHER
25. [1] 152200-2120 HAND PRIMER
30. [1] 152300-0720 EYE BOLT
32. [1] 029731-4680 EYE BOLT
35. [2] 139514-0100 GASKET
36. [2] 139514-0100 GASKET
42. [1] 152320-0100 COVER

Include in #1:

106671-3400 as SUPPLY PUMP

Cross reference number

Zexel num
Bosch num
Firm num
Name
105207-1090 
105207-1091 
 
225601500A  HINO
SUPPLY PUMP
*




Information:

Introduction
Do not perform any procedure in this Special Instruction until you have read the information and you understand the information.DEF injectors are being replaced in the field and returned to Caterpillar for testing. Results of the testing are finding a large portion of the returned DEF injectors are found to be fault not repeated.This form is to be used and filled out in any case that a DEF injector is being replaced.The DEF injector troubleshooting return form needs to be completed and included within failed part returns documenting what was found that led to DEF injector replacement. Attach the photos of DEF injector tip and mount area along with a Product Status Report to the SIMS claim.References
Table 1
Engine Publication Type Media Number
C7.1 Troubleshooting UENR0668
Testing and Adjusting UENR4467
Disassembly and Assembly UENR4468
C9.3 Troubleshooting UENR0978
Testing and Adjusting UENR3402
Disassembly and Assembly UENR0130
C13 Troubleshooting UENR0955
Testing and Adjusting UENR4302
Disassembly and Assembly UENR0131
C15/C18 Troubleshooting UENR0955
Testing and Adjusting UENR3351
Disassembly and Assembly UENR0132 Procedure
What code are you troubleshooting? __________
Follow the correct troubleshooting procedure. Reference Table 1 for correct media number to use.
When troubleshooting procedure requests the DEF quality check, DEF injector resistance measurement, or Dosing Accuracy Test, document those results in Tables 2, 3, and 4.Tables
Table 2
DEF Quality Results
Step Instruction Completed (Yes/No) Result Comments Units
1 Follow the Testing and Adjusting procedure for "Diesel Exhaust Fluid Quality - Test"
2 DEF Contamination Test Pass / Fail
3 DEF Concentration Test % at 20° C (68° F)
Illustration 1 g06175415
Table 3
Injector Resistance Measurement
Step Instruction Completed (Yes/No) Result Comments Units
1 Turn the keyswitch to the OFF position. Allow 2 minutes to elapse before proceeding.
2 Disconnect the DEF injectors from the applicable harness.
3 Inspect the connector for damage and debris.
4 Measure the temperature of the injector (aluminum body). C
5 Connect two 398-4987 Probes to the DEF injector. The connectors must be used to prevent damage to the DEF injector connector. Reference Illustration 1 for example.
6 Measure the resistance of the DEF injector. Ohms
Table 4
Dosing Accuracy Test
Step Instruction Completed (Yes/No) Result Comments Units
1 Follow the Testing and Adjusting procedure for "Aftertreatment SCR System Dosing - Test"
2 Remove the injector from the DPF outlet.
3 Take a photograph of the DEF injector mount on the DPF outlet and the tip of the DEF injector.
4 Install the injector on the beaker.
5 Run the DEF System Dosing Accuracy test through Cat® Electronic Technician (ET).
6 Use the beaker to measure the amount of fluid from the dosing test. ml
7 Repeat the test to verify consistency. ml
8 Install the injector back onto the DPF outlet.

Have questions with 105207-1090?





Group cross 105207-1090 ZEXEL

Hino 

9 440 610 343 
NP-FP/K22PC47/3NP16 
225601160A 
SUPPLY PUMP
9 440 610 343 
NP-FP/K22PC47/3NP16 
S225601160 
SUPPLY PUMP

Mitsubishi 

 
ME056046 
SUPPLY PUMP
9 440 610 862 
NP-FP/K-P 
ME726541 
SUPPLY PUMP
9 440 610 021 
NP-FP/K-P 
ME056053 
SUPPLY PUMP
9 440 610 673 
 
SUPPLY PUMP

Mitsubishi 

9 440 610 022 
NP-FP/K-P 
ME066097 
SUPPLY PUMP
9 440 610 610 
NP-FP/K-P 
 
SUPPLY PUMP
9 440 610 957 
NP-FP/K-P 
 
SUPPLY PUMP

Mitsubishi 

9 440 610 863 
NP-FP/K-P 
ME066175 
SUPPLY PUMP

Hino 

105207-1090  

105207-1091 
 
225601500A 
SUPPLY PUMP
9 440 610 370 
NP-FP/K-P 
225601501A 
SUPPLY PUMP
Back to top