105207-1080 ZEXEL 9 440 610 957 BOSCH SUPPLY PUMP 9440610957 1052071080


 

Information supply pump

BOSCH 9 440 610 957 9440610957
ZEXEL 105207-1080 1052071080
105207-1080 SUPPLY PUMP
Rating:
27
Buy SUPPLY PUMP 105207-1080 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

1. [1] 152000-4620 PUMP HOUSING
5. [1] 152100-1120 PUMP PLUNGER
6. [1] 152102-2100 COMPRESSION SPRING
7. [1] 152105-1500 CAPSULE
8. [1] 029332-6030 GASKET
10. [1] 152111-3221 TAPPET
10/2. [1] 152112-0500 ROLLER
10/3. [1] 152113-1000 BEARING PIN
10/4. [2] 152114-1600 SLIDER
14. [2] 152115-0100 VALVE BODY
14. [2] 152115-0100 VALVE BODY
15. [2] 152116-0200 COILED SPRING
15. [2] 152116-0200 COILED SPRING
17. [1] 152118-1000 ADAPTOR
18. [2] 029331-6030 GASKET
18. [2] 029331-6030 GASKET
20. [1] 152121-0200 LOCKING WASHER
25. [1] 152200-2120 HAND PRIMER
30. [1] 152300-6820 EYE BOLT
32. [1] 029111-4050 CAPSULE
35. [2] 026514-1840 GASKET D17.9&14.2T1
36. [1] 026514-1840 GASKET D17.9&14.2T1
42. [1] 152320-0100 COVER
49. [1] 029731-4680 EYE BOLT
51. [2] 026514-1840 GASKET D17.9&14.2T1

Include in #1:

106871-2280 as SUPPLY PUMP

Cross reference number

Zexel num
Bosch num
Firm num
Name
105207-1080 
105207-1081 
9 440 610 957 
NP-FP/K-P 
   
SUPPLY PUMP
K 14GC FEED PUMP F/P




Information:

Introduction
The EPA has mandated that a DEF quality sensor must be installed on all engines built in 2017 or after. This new DEF quality sensor is integrated into the DEF header inside the DEF tank. The new style DEF header utilizes CAN C communication, so the wiring to the DEF header has been slightly modified on product going forward. However, the DCU remains compatible to both setups with the latest 507-7605 Engine Software. As part of the DEF quality sensor implementation, a new configuration parameter setting is used on the engine ECM in Cat® Electronic Technician (ET) to identify whether a DEF quality sensor is "installed" or "not installed". Below are some different fault codes for incompatible hardware and configuration setting as well as different service scenarios that may be encountered with this change and how to resolve any issues in these particular service scenarios. In addition to this Special Instruction, there is a video detailing these changes posted on Cat Channel 1.Channel1 Video
Note: A CWS login is required to access Caterpillar Channel1. Scan the QR code below with a QR enabled device or copy the link that follows.
Illustration 1 g06462430Reference: For more information, refer to "Diesel Exhaust Fluid Quality Sensor" on Caterpillar Channel1.https://channel1.mediaspace.kaltura.com/media/0_qyokrphe
Fault Codes When Parts/Settings Are Not Compatible
DEF quality header not installed but configuration set to installed.
Table 1
J1939 Code and Description CDL Code and Description
1235-9
J1939 Network #3 : Abnormal Update Rate 5856-9
J1939 Network #3 : Abnormal Update Rate DEF quality header installed but configuration set to not installed.
Table 2
J1939 Code and Description CDL Code and Description
1761-3
Aftertreatment 1 Diesel Exhaust Fluid Tank Level : Voltage Above Normal 3130-3
Aftertreatment #1 SCR Catalyst Reagent Tank #1 Level Sensor : Voltage Above Normal
3031-3
Aftertreatment 1 Diesel Exhaust Fluid Tank Temperature : Voltage Above Normal 3134-3
Aftertreatment #1 SCR Catalyst Reagent Tank #1 Temperature Sensor : Voltage Above Normal DEF Quality Sensor Service Scenarios
Listed below are the different examples of when the DEF Quality Sensor and associated components are needed.Replacement Industrial Engine (Built in 2016 or Before)
If these engines are replaced with an engine built in 2017 or after, the following updates will be required:
Updating to a DEF Quality Sensor by installing a new DEF Header
Wiring Harness
DCU Software
Change configuration status to "Installed" in Cat ETReplacement Machine Engine (Built in 2016 or Before)
If this engine is replaced with an engine built in 2016 or a previous Engine Arrangement Complete (EAC) engine, no other changes are needed.Confirm that the "DEF Quality Sensor" configuration is set to "Not Installed" in Cat ET.Replacement Machine Engine (Built in 2016 or Before)
If the engine is replaced with the latest EAC the following updates will be required:
Update to a DEF Quality Sensor by installing a new DEF header
Wiring harness
DCU Software
Change configuration status to "Installed" in Cat ETReplacement Engine (Built in 2017 or After)
Replace the engine with the latest EAC.Installing the DEF Quality Sensor on Engines Built in 2016 or Before
If installing the DEF Quality Sensor on engine built in 2016 or before, the following must be updated as well:
DCU software update
PETU

Have questions with 105207-1080?





Group cross 105207-1080 ZEXEL

Hino 

9 440 610 343 
NP-FP/K22PC47/3NP16 
225601160A 
SUPPLY PUMP
9 440 610 343 
NP-FP/K22PC47/3NP16 
S225601160 
SUPPLY PUMP

Mitsubishi 

 
ME056046 
SUPPLY PUMP
9 440 610 862 
NP-FP/K-P 
ME726541 
SUPPLY PUMP
9 440 610 021 
NP-FP/K-P 
ME056053 
SUPPLY PUMP
9 440 610 673 
 
SUPPLY PUMP

Mitsubishi 

9 440 610 022 
NP-FP/K-P 
ME066097 
SUPPLY PUMP
9 440 610 610 
NP-FP/K-P 
 
SUPPLY PUMP
105207-1080  

105207-1081 
9 440 610 957 
NP-FP/K-P 
 
SUPPLY PUMP

Mitsubishi 

9 440 610 863 
NP-FP/K-P 
ME066175 
SUPPLY PUMP

Hino 

 
225601500A 
SUPPLY PUMP
9 440 610 370 
NP-FP/K-P 
225601501A 
SUPPLY PUMP
Back to top