102754-0000 ZEXEL 9 441 610 394 BOSCH SUPPLY PUMP 9441610394 1027540000


 

Information supply pump

BOSCH 9 441 610 394 9441610394
ZEXEL 102754-0000 1027540000
102754-0000 SUPPLY PUMP
Rating:
9
Buy SUPPLY PUMP 102754-0000 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

1. [1] 137503-0020 PUMP HOUSING
5. [1] 137503-0200 PUMP PLUNGER
6. [1] 137503-0300 COILED SPRING
7. [1] 137503-0400 CAPSULE
8. [1] 029332-6030 GASKET
10. [1] 137503-0520 TAPPET
14. [2] 152115-0500 VALVE BODY
14. [2] 152115-0500 VALVE BODY
15. [2] 137503-0700 COILED SPRING
15. [2] 137503-0700 COILED SPRING
17. [1] 137503-1200 ADAPTOR
18. [1] 139716-0200 O-RING
19. [1] 139716-0200 O-RING
20. [1] 152121-0200 LOCKING WASHER
25. [1] 137503-0820 HAND PRIMER
30. [1] 137500-1000 EYE BOLT
32. [1] 137500-1000 EYE BOLT
35. [2] 029341-4130 GASKET D20&13.8T2*
36. [2] 029341-4130 GASKET D20&13.8T2*

Include in #1:

102750-0001 as SUPPLY PUMP

Cross reference number

Zexel num
Bosch num
Firm num
Name
102754-0000 
9 441 610 394 
NP-FP/KS-AD 
   
SUPPLY PUMP
Q




Information:


Refer to attached Rework Procedure.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 1*******
0-2000 hrs,
0-12 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
2001-5000 hrs,
13-18 mo 100.0% 50.0% 0.0% 0.0% 0.0% 50.0%
5001-8000 hrs,
19-24 mo 100.0% 30.0% 0.0% 0.0% 0.0% 70.0%
This is a 4.0-hour job for Group 1
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 2*******
0-2000 hrs,
0-12 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
2001-5000 hrs,
13-18 mo 100.0% 50.0% 0.0% 0.0% 0.0% 50.0%
5001-8000 hrs,
19-24 mo 100.0% 30.0% 0.0% 0.0% 0.0% 70.0%
This is a 4.0-hour job for Group 2
PARTS DISPOSITION
removed java code "affectDisposition"commented on Chints October 12 2006 Chints w.r.t CM000343756-->
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
For the following units listed remove (6) 207-5248 Injector Rocker Arms, and replace with (6) 278-1365 Injector Rocker Arms.
For proper ?Disassembly & Assembly? instructions of the injector rocker arms please refer to the following Publications in SIS Web. (SENR9832-06 Testing & Adjusting-Finding Top Dead Center Position for No. 1 Piston), (SENR9832-06 Testing & Adjusting-Electronic Unit Injector Adjusting & Setting), and (SENR9832-06 Testing & Adjusting-Engine Valve Lash Inspect/Adjust).
Note: It is important that while installing the 278-1365 Injector Rocker Arms, that the engine is in the proper position (Top Dead Center and 180 degrees out) so the Injector Rocker Arms are properly adjusted and set. It is also important that during the installation of the Injector Rocker Arms that the Exhaust Valve, and Intake Valve lash settings be inspected and if needed re-set to factory specifications.
Note: During the rework process please inspect the 6I-0901 Rocker Arm Shafts for any signs of misalignment of the stud mounting holes, wear, damage, fretting etc. If damage is found to the shaft or if fretting or damage is found with any of the through bolt/stud mounting holes, the shaft is to be replaced, and reported against this service letter as contingent damage.

Have questions with 102754-0000?





Group cross 102754-0000 ZEXEL

102754-0000  
9 441 610 394 
NP-FP/KS-AD 
 
SUPPLY PUMP

Mitsubishi 

 
ME741629 
SUPPLY PUMP
Back to top