105780-8180 ZEXEL 9 430 613 641 BOSCH NOZZLE AND HOLDER ASSY. 9430613641 1057808180 0986613209


 

Information nozzle and holder assy.

BOSCH 9 430 613 641 9430613641
ZEXEL 105780-8180 1057808180
  0986613209
105780-8180 NOZZLE AND HOLDER ASSY.
Rating:
68
Buy NOZZLE AND HOLDER ASSY. 105780-8180 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
105780-8180 
9 430 613 641 
NP-EF8511/9A 
0986613209   
NOZZLE AND HOLDER ASSY.
K 20GV NOZZLE & HOLDER ASSY TESTER Others




Information:


Typical Example1. Turn the crankshaft until the "C" mark on the crankshaft gear is in alignment with the "C" mark on the camshaft gear. To keep the engine timing correct during removal and installation of the camshaft, put a mark on the teeth of the fuel injection pump drive gear and idler gear at location (A). Put a mark on the teeth of the idler gear and camshaft gear at location (B). When installing the camshaft, the engine timing will be correct when the marks at locations (A) and (B) are in alignment and the "C" marks on the crankshaft and camshaft gears are in alignment.2. Remove the bolts, lock and washer (1) that hold the camshaft in position.3. Remove the camshaft and gear (2). Do not cause damage to the lobes or bearings when the camshaft is removed.4. If necessary, remove the bolts and gear from the camshaft. The following steps are for the installation of the camshaft.5. Put the camshaft drive gear in position on the end of the camshaft, and install the bolts that hold it. Tighten the bolts to a torque of 55 7 N m (41 5 lb ft).
Do not cause damage to the lobes or bearings when the camshaft is installed.
6. Put 2P2506 Thread Lubricant on the camshaft lobes only, and clean engine oil on the bearing journals. Install camshaft (3) in the cylinder block, and make an alignment of the "C" marks and the marks put on the gears during removal.7. Install washer (1), the lock and bolts to hold the camshaft in position.End By:a. install valve liftersb. install timing gear cover

Have questions with 105780-8180?





Group cross 105780-8180 ZEXEL

9 430 610 146 
NP-EFEP215A 
 
NOZZLE AND HOLDER ASSY.
9 430 610 168 
NP-EF8511/9A 
 
NOZZLE AND HOLDER ASSY.
 
 

9 430 613 453 
 
NOZZLE AND HOLDER ASSY.
105780-8180  
9 430 613 641 
NP-EF8511/9A 
0986613209 
NOZZLE AND HOLDER ASSY.
9 430 610 134 
 
NOZZLE AND HOLDER ASSY.
Back to top