105110-8160 ZEXEL 9 430 612 912 BOSCH NOZZLE AND HOLDER ASSY. 9430612912 1051108160 0ke8813640


 

Information nozzle and holder assy.

BOSCH 9 430 612 912 9430612912
ZEXEL 105110-8160 1051108160
HYUNDAI 0KE8813640 0ke8813640
105110-8160 NOZZLE AND HOLDER ASSY.
Rating:
13
Buy NOZZLE AND HOLDER ASSY. 105110-8160 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
105110-8160 
9 430 612 912 
41-4330 
0KE8813640  HYUNDAI
NOZZLE AND HOLDER ASSY.
KKTCI * K




Information:

7N9720 Alternator 24V 35A (Bosch Number 0-122-469-001); 9G9538 Alternator 24V 50A (Bosch Number 0-122-469-002)
7N9720 AlternatorThe solid state regulator used with the Bosch Alternator is totally enclosed and non-adjustable. If the rate of charge is not correct a replacement of the regulator is necessary.9G4574 24V 35A (Nippondenso Number 100211-0860); 6T7223 24V 50A (Nippondenso Number 100211-0890)
9G4574 AlternatorNo adjustment can be made to change the rate of charge on the alternator regulator. If rate of charge is not correct, a replacement of the regulator is necessary.2P1204 24V 15A (Prestolite Number ANB-7004)
Prestolite Alternator Regulator
1. Adjustment screw. 2. High output position. 3. Green wire to field terminal of alternator. 4. Low output position. 5. Orange wire to field supply terminal.The regulator components are sealed in an insulation of epoxy. The regulator is an electronic component with no moving parts (solid state) and has an adjustment screw (1) on the back. This voltage adjustment screw is used to meet different needs of operation at different times of the year. To increase or decrease by .5 volts from the normal (N) setting, remove the regulator and change the position of the adjustment screw and pointer. Move the adjustment screw (1) and pointer to "H" position (2) to increase the voltage. Move adjustment screw (1) and pointer to "L" position (4) to decrease the voltage.Starting System
Use the multimeter in the DCV range to find starting system components which do not function.Move the start control switch to activate the starter solenoid. Starter solenoid operation can be heard as the pinion of the starter motor is engaged with the ring gear on the engine flywheel.If the solenoid for the starter motor will not operate, it is possible that the current from the battery did not get to the solenoid. Fasten one lead of the multimeter to the connection (terminal) for the battery cable on the solenoid. Put the other lead to a good ground. A zero reading is an indication that there is a broken circuit from the battery. More testing is necessary when there is a voltage reading on the multimeter.The solenoid operation also closes the electric circuit to the motor. Connect one lead of the multimeter to the solenoid connection (terminal) that is fastened to the motor. Put the other lead to a good ground. Activate the starter solenoid and look at the multimeter. A reading of battery voltage shows the problem is in the motor. The motor must be removed for further testing. A zero reading on the multimeter shows that the solenoid contacts do not close. This is an indication of the need for repair to the solenoid or an adjustment to be made to the starter pinion clearance.Make a test with one multimeter lead fastened to the connection (terminal) for the small wire at the solenoid and the other lead to the ground. Look at the multimeter and activate the starter solenoid. A voltage reading shows that the problem is in the solenoid. A zero reading is an indication that the problem is

Have questions with 105110-8160?





Group cross 105110-8160 ZEXEL

Nissan-Diesel 

9 430 612 753 
41-4310L4 
1660096662 
NOZZLE AND HOLDER ASSY.
PF6HTA

Isuzu 

9 430 612 736 
41-2081G 
1153003890 
NOZZLE AND HOLDER ASSY.
6HK1TC
9 430 612 913 
41-2081G 
 
NOZZLE AND HOLDER ASSY.

Isuzu 

9 430 613 505 
41-2082G 
1153003891 
NOZZLE AND HOLDER ASSY.
6HK1TC
9 430 612 914 
41-4110P 
 
NOZZLE AND HOLDER ASSY.
6D24TL
9 430 613 360 
41-41102J 
 
NOZZLE AND HOLDER ASSY.

Mitsubishi 

9 430 613 825 
41-41112J 
ME440089 
NOZZLE AND HOLDER ASSY.
6D24TL

Isuzu 

9 430 612 915 
41-4320E 
1153004020 
NOZZLE AND HOLDER ASSY.
8TD1
9 430 613 506 
41-4321E 
1153004021 
NOZZLE AND HOLDER ASSY.
9 430 612 916 
41-2081H 
 
NOZZLE AND HOLDER ASSY.

Isuzu 

9 430 613 507 
41-2082H 
1153004040 
NOZZLE AND HOLDER ASSY.
6HK1T

Dpico 

9 430 612 917 
41-4350 
 
NOZZLE AND HOLDER ASSY.
Q-2000

Hyundai 

105110-8160  
9 430 612 912 
41-4330 
0KE8813640 
NOZZLE AND HOLDER ASSY.
KKTCI

Isuzu 

9 430 612 911 
41-4340 
1153003930 
NOZZLE AND HOLDER ASSY.
6SD1XQB
 
1153003931 
NOZZLE AND HOLDER ASSY.
6SD1XQB
9 430 613 508 
41-4341A 
1153003932 
NOZZLE AND HOLDER ASSY.
6SD1XQB
9 430 613 361 
41-4360 
1153003920 
NOZZLE AND HOLDER ASSY.
6WG1XQA
9 430 613 509 
41-4361A 
1153003921 
NOZZLE AND HOLDER ASSY.
6WG1XQA
9 430 613 581 
41-4361B 
1153003922 
NOZZLE AND HOLDER ASSY.
6WG1XQA
9 430 613 446 
41-2081J 
 
NOZZLE AND HOLDER ASSY.

Isuzu 

9 430 613 510 
41-2082J 
1153004140 
NOZZLE AND HOLDER ASSY.
6HK1TQC
Back to top