105110-4300 ZEXEL 9 430 611 789 BOSCH NOZZLE AND HOLDER ASSY. 9430611789 1051104300 100219180


 

Information nozzle and holder assy.

BOSCH 9 430 611 789 9430611789
ZEXEL 105110-4300 1051104300
SHINKO-ENGIN. 100219180 100219180
105110-4300 NOZZLE AND HOLDER ASSY.
Rating:
51
Buy NOZZLE AND HOLDER ASSY. 105110-4300 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
105110-4300 
105110-4430 
9 430 611 789 
40-2190 
100219180  SHINKO-ENGIN.
NOZZLE AND HOLDER ASSY.
S615DZ K




Information:

Problem
The fuel injection pumps used on certain Remanufactured 1160 and 3208 Engines need to be inspected for gummy deposits.
Affected Product
Model & Identification Number
1160 (57V1-34485)
3208 (9WC1-1093), (5CD1-9736), (62W1-76455), (93Z1-10198)
Parts Stock Remanufactured Fuel Pump Part Numbers
This program applies only to pumps in parts stock with a date code prior to November, 1993 (UUDE). Date codes are in the MM/YY mode with the standard notation of NUMBERALKOD.
Parts Needed
Not applicable.
Action Required
Before installing or delivering any of the Affected Product, perform the following steps to ensure the internal fuel injection pump components are not stuck due to fuel pump gumming:
1. Remove the top cover of the fuel injection pump and check to ensure that all sleeves and levers are free and there are no gummy deposits on any of these components.2. If inspection performed in Step 1 indicates everything is clean, install top cover and return to parts stock.3. If inspection reveals components have gummy deposits, remove 12 ounces of fuel from the fuel pump housing and replace it with:-Fuel Injector Cleaner
or
-Carburetor/Choke Cleaner
4. Allow the components to soak in cleaning solution for 45 minutes. Then, rotate the engine crankshaft to rotate the fuel injection pump and check for free movement of the lever and sleeve (on pumps only, rotate the fuel pump camshaft). This will ensure the components have the gummy deposits removed.5. If the above procedures do not free the pump assembly, remove the individual pumps from the pump housing, clean them with cleaning solution, and install them back into the housing.6. If the engine or fuel pump will be used immediately, install the cover on the fuel injection pump, and install or deliver the engine or pump.7. If the engine or fuel pump will be returned to stock, DO NOT leave the fuel injection pump full of cleaning solution because it may not contain any rust inhibitors. Remove the cleaning solution, fill the fuel injector pump with clean diesel fuel, and install the cover on the pump.Service Claim Allowances
The inspection of the pump is a .5-hour job. If the pump needs to be cleaned, an additional .5 hour may be claimed. If the individual pumps need to be removed from the pump housing for cleaning, up to an additional 1.5 hours may be claimed.
US and Canadian Dealers Only - When submitting a claim for a fuel pump in Parts Stock, use 99Z00007 in the Product Identification Number Field.
Parts Disposition
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.

Have questions with 105110-4300?





Group cross 105110-4300 ZEXEL

Shinko-Engin. 

105110-4300  

105110-4430 
9 430 611 789 
40-2190 
100219180 
NOZZLE AND HOLDER ASSY.
S615DZ

Kubota 

9 430 611 790 
41-5020E 
1452703210 
NOZZLE AND HOLDER ASSY.
LH105CS

Hino 

9 430 610 081 
41-5041C 
236001710A 
NOZZLE AND HOLDER ASSY.
W04D-T

Kubota 

9 430 611 791 
41-5020F 
1452704220 
NOZZLE AND HOLDER ASSY.
LH105S

Shinko-Engin. 

9 430 611 792 
40-2190A 
100219230 
NOZZLE AND HOLDER ASSY.
S615DS

Hino 

9 430 611 793 
41-5070 
236001730A 
NOZZLE AND HOLDER ASSY.
W06E

Kubota 

9 430 611 794 
41-5020G 
1452706210 
NOZZLE AND HOLDER ASSY.
LH105CS

Hino 

9 430 611 795 
41-5080 
236001800A 
NOZZLE AND HOLDER ASSY.
W06E
9 430 611 796 
41-5090 
236001780A 
NOZZLE AND HOLDER ASSY.
W04C-TI

Komatsu 

9 430 611 797 
41-7080F 
6152113600 
NOZZLE AND HOLDER ASSY.
SA6D125
Back to top