105015-7170 ZEXEL 9 432 611 262 BOSCH NOZZLE 9432611262 1050157170 100218070


 

Information nozzle

BOSCH 9 432 611 262 9432611262
ZEXEL 105015-7170 1050157170
SHINKO-ENGIN. 100218070 100218070
105015-7170 NOZZLE
Rating:
25
Buy NOZZLE 105015-7170 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
105015-7170 
105015-7210 
9 432 611 262 
NP-DLLA135SN717 
100218070  SHINKO-ENGIN.
NOZZLE
* C
105015-7170 
105015-7210 
9 432 611 262 
NP-DLLA135SN717 
H154023090  DAIHATSU
NOZZLE
* C




Information:

1. Remove oil supply tube (1) and suction bell and tube (2). 2. Remove bolts (3) that hold the oil pump to the cylinder block, and remove oil pump (4). The following steps are for installation of the oil pump.3. Put oil pump (4) in position on the cylinder block. Install the bolts that hold the oil pump to the cylinder block.4. Put clean engine oil on the O-ring seals of the tubes.5. Install oil supply tube (1) and suction bell and tube (2).End By:a. install oil panDisassemble Oil Pump
Start By:a. remove oil pump1. Remove the bolt and washer that hold the gear on the shaft. 2. Use tooling (A), and remove drive gear (1) from the shaft. Remove the key from the shaft. 3. Remove retainer (3) for the bypass valve.4. Remove the spring and bypass valve.5. Remove cover (2) from the pump body. 6. Use tooling (B), and remove the bearings from the cover. 7. Remove gears (5) and (6) from pump body (4).8. Use tooling (B), and remove the bearings from the pump body (4).Assemble Oil Pump
1. Use tooling (B), to install the bearings in the pump body. Install the bearings so the joint in the bearings is 30° 15° for the center line of the oil pump outlet passage (7). 2. Install idler gear (5) and drive gear (6) in the oil pump body. Put clean engine oil on the bearings and the gears. 3. Use tooling (B), and install the bearings in cover (2). Install the bearings so the joint in the bearings is 30° 15° for the center line of the bearing bores toward oil pump outlet passage (7).4. Install bypass valve (8), spring (9) and the retainer.5. Install the key on the shaft. 6. Install gear (1) on the shaft. Install the washer and bolt that hold the gear on the shaft. BE sure the pump turns freely after assembly.End By:a. install oil pump

Have questions with 105015-7170?





Group cross 105015-7170 ZEXEL

9 432 610 265 
NP-DLLA155SN710 
 
HOLE-TYPE NOZZLE
9 432 610 399 
NP-DLLA155SN711 
 
HOLE-TYPE NOZZLE
9 432 612 343 
NP-DLLA149SN712 
 
NOZZLE

Nissan-Diesel 

9 432 610 211 
NP-DLLA153SN7131 
1662001T61 
NOZZLE

Kubota 

9 432 610 460 
NP-DLLA141SN714 
1570753611 
NOZZLE
9 432 610 460 
NP-DLLA141SN714 
0570753611 
NOZZLE
9 432 610 460 
NP-DLLA141SN714 
1570753611 
NOZZLE

Hino 

 
236401590A 
NOZZLE

Mitsubishi-Heav 

9 432 611 261 
NP-DLL160SN716 
3626131800 
NOZZLE

Shinko-Engin. 

105015-7170  

105015-7210 
9 432 611 262 
NP-DLLA135SN717 
100218070 
NOZZLE

Daihatsu 

105015-7170  

105015-7210 
9 432 611 262 
NP-DLLA135SN717 
H154023090 
NOZZLE

Hino 

9 432 610 177 
NP-DLLA142SN718 
236401580A 
NOZZLE
9 432 611 263 
NP-DLLA138SN719 
236401600A 
NOZZLE
Back to top