105015-7140 ZEXEL 9 432 610 460 BOSCH NOZZLE 9432610460 1050157140 1570753611


 

Information nozzle

BOSCH 9 432 610 460 9432610460
ZEXEL 105015-7140 1050157140
KUBOTA 1570753611 1570753611
105015-7140 NOZZLE
Rating:
20
Buy NOZZLE 105015-7140 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
105015-7140 
9 432 610 460 
NP-DLLA141SN714 
1570753611  KUBOTA
NOZZLE
C 50LC NOZZLE N (DLL-S) N
105015-7140 
9 432 610 460 
NP-DLLA141SN714 
0570753611  KUBOTA
NOZZLE
A C 50LC NOZZLE N (DLL-S) N
105015-7140 
9 432 610 460 
NP-DLLA141SN714 
1570753611  KUBOTA
NOZZLE
C 50LC NOZZLE N (DLL-S) N




Information:

Start By:a. remove valve covers 1. Loosen the fuel injection line nut at the nozzle end with tool (A).2. Loosen the fuel line nut at the fuel injection line adapter with tool (B). Remove inner fuel injection lines (1). Install caps and plugs on all fuel injection line openings to keep dirt out of the fuel system. If necessary, use tooling (D) to turn the engine so the valves do not make contact with the pistons when the valves are opened with tool (C) to remove the push rods.3. Put compression on the valve springs with tool (C). And remove push rods (2). Put identification mark on the push rods as to their location in the engine.4. Push the push rod end of the rocker arms down. 5. Remove the intake valve lifter with tooling (E) as follows:a. Install 5P2685 Nut (3) and 5P6601 Collet (4) on 5P2408 Outer Handle Assembly (5).b. Install 5P6599 Inner Handle Assembly (6) in 5P2408 Outer Handle Assembly (5). c. Install tooling (E) in the intake valve lifter. Hold the 5P2408 Outer Handle Assembly, and tighten the 5P6599 Inner Handle Assembly until the 5P6601 Collet is tight against the inside of the intake valve lifter. d. Remove intake valve lifters (7) from the cylinder block with tooling (E). Put identification marks on the lifters as to their location in the engine. 6. Remove the exhaust valve filters with tooling (E) as follows:a. Install 5P2685 Nut (3) and 5P6601 Collet (4) on 5P2408 Outer Handle Assembly (5). The opening in the cylinder head assembly for the intake valve lifter is larger than the opening in the exhaust valve lifter side. The tooling and each valve lifter must be installed and removed from the intake valve lifter side.b. Install the outer handle assembly in the intake valve lifter side of the cylinder head assembly. Slide the flat area of 5P2408 Outer Handle Assembly (5) through the head casting, and install the 5P6601 Collet in the exhaust valve lifters. c. Install 5P6599 Inner Handle Assembly (6) in 5P2408 Outer Handle Assembly (5). Hold the 5P2408 Handle Assembly, and tighten the 5P6599 Handle Assembly until the 5P6601 Collet is tight against the inside of the exhaust valve lifter.d. Pull the exhaust valve lifter up until the spring on the exhaust valve lifter is free from the cylinder block.e. Remove the 5P6599 Inner Handle Assembly through the head casting, and remove it from the intake valve lifter side of the cylinder head. f. Use a magnet, and remove exhaust valve lifters (8) from the intake valve lifter side of the cylinder head assembly. Put identification marks on the lifters as to their location on the engine.7. Remove the guide springs from the lifters.Install Valve Lifters
Steps 1 and 2 must be done to install intake or exhaust valve lifters.
Make sure

Have questions with 105015-7140?





Group cross 105015-7140 ZEXEL

9 432 610 265 
NP-DLLA155SN710 
 
HOLE-TYPE NOZZLE
9 432 610 399 
NP-DLLA155SN711 
 
HOLE-TYPE NOZZLE
9 432 612 343 
NP-DLLA149SN712 
 
NOZZLE

Nissan-Diesel 

9 432 610 211 
NP-DLLA153SN7131 
1662001T61 
NOZZLE

Kubota 

105015-7140  
9 432 610 460 
NP-DLLA141SN714 
1570753611 
NOZZLE
105015-7140  
9 432 610 460 
NP-DLLA141SN714 
0570753611 
NOZZLE
105015-7140  
9 432 610 460 
NP-DLLA141SN714 
1570753611 
NOZZLE

Hino 

 
236401590A 
NOZZLE

Mitsubishi-Heav 

9 432 611 261 
NP-DLL160SN716 
3626131800 
NOZZLE

Shinko-Engin. 

9 432 611 262 
NP-DLLA135SN717 
100218070 
NOZZLE

Daihatsu 

9 432 611 262 
NP-DLLA135SN717 
H154023090 
NOZZLE

Hino 

9 432 610 177 
NP-DLLA142SN718 
236401580A 
NOZZLE
9 432 611 263 
NP-DLLA138SN719 
236401600A 
NOZZLE
Back to top