Buy 105011-1790 ZEXEL 9 432 610 088 BOSCH NOZZLE 9432610088 1050111790 0423403010


 

Information nozzle

BOSCH 9 432 610 088 9432610088
ZEXEL 105011-1790 1050111790
MITSUBISHI 0423403010 0423403010
105011-1790 NOZZLE
Rating:
35
Buy NOZZLE 105011-1790 zexel genuine, new aftermarket engine parts with delivery

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below
$112.75
 

27 Sep 2019

-: -
Bosch 9432610088 Hole-Type Nozzle
A brand-new Bosch OEM part || 9432610088

Cross reference number

Zexel num
Bosch num
Firm num
Name
105011-1790 
9 432 610 088 
NP-DL155T358NP1 
0423403010  MITSUBISHI
NOZZLE
C 31BA NOZZLE N(DL-T) N




Information:

T-T-T Procedure
A torque-turn-tighten (T-T-T) procedure is used in many specifications and instructions.1. Clean the bolt and nut threads.2. Put lubricant on the threads and the seat face of the bolt and the nut.3. Turn the bolt or the nut tight according to the torque specification.4. Put a location mark on the part and on the bolt or the nut.5. Turn the bolt or the nut tighter the amount of degrees according to the specifications. The side of a nut or bolt head can be used for reference if a mark can not be put on. Torque Wrench Extension
When a torque wrench extension is used with a torque wrench, the torque indication on the torque wrench will be less than the real torque.
TORQUE WRENCH WITH TORQUE WRENCH EXTENSION.
E: Torque wrench drive axis-to-torque wrench extension drive axis. W: Mark on handle-to-torque wrench drive axis.1. Put a mark on the handle. Measure the handle from the mark to the axis of the torque wrench drive (W).2. Measure the torque wrench extension from the torque wrench drive to the axis of the torque wrench extension drive (E).3. To get correct torque indication (TI) when the real torque (RT) is known: Example: W = 304.8 mm (12 in.); E = 65.0 mm (2.56 in.); RT (from specifications) = 170 N m (125 lb. ft.). 4. Hold the torque wrench handle with the longest finger of the hand over the mark on the handle to get the real torque (RT) with low torque indication (TI) on the torque wrench.Locks
Flat metal locks must be installed properly to be effective. Bend one end of the lock around the edge of the part. Bend the other end against one flat surface of the nut or bolt head.Always install new locks in compartments which house moving parts.If lockwashers are installed on housings made of aluminum, use a flat washer between the lockwasher and the housing. Lines And Wires
When removing or disconnecting a group of lines or wires, tag each one to assure proper assembly.Lubrication
Where applicable, fill the compartments of the components serviced with the amount, type and grade of lubricant recommended in the Lubrication and Maintenance Guide.Rust Preventive Compound
Clean the rust preventive compound from all machined surfaces of new parts before installing them.Shims
When shims are removed, tie them together and identify them as to location. Keep shims clean and flat until they are reinstalled.Bearings
Anti-Friction Bearings
When an anti-friction bearing is removed, cover it to keep out dirt and abrasives. Wash bearings in nonflammable cleaning solution and allow them to drain dry. The bearing may be dried with compressed air, but DO NOT SPIN THE BEARING. Discard the bearings if the races and balls or rollers are pitted, scored or burned. If the bearing is serviceable, coat it with oil and wrap it in clean paper. Do not unwrap new bearings until time of installation.The life of an anti-friction bearing will be shortened if not properly lubricated.Double Row, Tapered Roller
Double row, tapered roller bearings are precision fit during manufacture and

Have questions with 105011-1790?





Group cross 105011-1790 ZEXEL

9 432 612 060 
NP-DL120T368NP1 
 
NOZZLE

Fuji-Diesel 

9 432 611 682 
NP-DL145T358NP1 
404646 
NOZZLE
9 432 612 061 
NP-DL145T408NP1 
 
NOZZLE
9 432 612 062 
NP-DL120T356NP1 
 
NOZZLE

Mitsubishi 

105011-1790  
9 432 610 088 
NP-DL155T358NP1 
0423403010 
NOZZLE
Back to top