Buy 105007-1360 ZEXEL 9 432 610 421 BOSCH NOZZLE 9432610421 1050071360 8971431900


 

Information nozzle

BOSCH 9 432 610 421 9432610421
ZEXEL 105007-1360 1050071360
ISUZU 8971431900 8971431900
105007-1360 NOZZLE
Rating:
70
Buy NOZZLE 105007-1360 zexel genuine, new aftermarket engine parts with delivery

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below
$6.00
 

03 Oct 2019
0.09[0.00] Pounds
-: -
DN0PDN136 injector nozzle 105007-1360 897141900
Our products are professionally tested and have good quality.
£88.92
 

01 Oct 2018
4.85[1.80] pounds
Bosch: Bosch
Bosch 9432610421 Pintle Nozzle
1426 BOSCH cones nozzle

You can express buy:

USD 43
10-11-2022

Cross reference number

Zexel num
Bosch num
Firm num
Name
105007-1360 
9 432 610 421 
NP-DN0PDN136 
8971431900  ISUZU
NOZZLE
C 50LB NOZZLE N (DN-PD) N




Information:

Introduction
Do not perform any procedure in this Special Instruction until you have read the information and you understand the information.DEF injectors are being replaced in the field and returned to Caterpillar for testing. Results of the testing are finding a large portion of the returned DEF injectors are found to be fault not repeated.This form is to be used and filled out in any case that a DEF injector is being replaced.The DEF injector troubleshooting return form needs to be completed and included within failed part returns documenting what was found that led to DEF injector replacement. Attach the photos of DEF injector tip and mount area along with a Product Status Report to the SIMS claim.References
Table 1
Engine Publication Type Media Number
C7.1 Troubleshooting UENR0668
Testing and Adjusting UENR4467
Disassembly and Assembly UENR4468
C9.3 Troubleshooting UENR0978
Testing and Adjusting UENR3402
Disassembly and Assembly UENR0130
C13 Troubleshooting UENR0955
Testing and Adjusting UENR4302
Disassembly and Assembly UENR0131
C15/C18 Troubleshooting UENR0955
Testing and Adjusting UENR3351
Disassembly and Assembly UENR0132 Procedure
What code are you troubleshooting? __________
Follow the correct troubleshooting procedure. Reference Table 1 for correct media number to use.
When troubleshooting procedure requests the DEF quality check, DEF injector resistance measurement, or Dosing Accuracy Test, document those results in Tables 2, 3, and 4.Tables
Table 2
DEF Quality Results
Step Instruction Completed (Yes/No) Result Comments Units
1 Follow the Testing and Adjusting procedure for "Diesel Exhaust Fluid Quality - Test"
2 DEF Contamination Test Pass / Fail
3 DEF Concentration Test % at 20° C (68° F)
Illustration 1 g06175415
Table 3
Injector Resistance Measurement
Step Instruction Completed (Yes/No) Result Comments Units
1 Turn the keyswitch to the OFF position. Allow 2 minutes to elapse before proceeding.
2 Disconnect the DEF injectors from the applicable harness.
3 Inspect the connector for damage and debris.
4 Measure the temperature of the injector (aluminum body). C
5 Connect two 398-4987 Probes to the DEF injector. The connectors must be used to prevent damage to the DEF injector connector. Reference Illustration 1 for example.
6 Measure the resistance of the DEF injector. Ohms
Table 4
Dosing Accuracy Test
Step Instruction Completed (Yes/No) Result Comments Units
1 Follow the Testing and Adjusting procedure for "Aftertreatment SCR System Dosing - Test"
2 Remove the injector from the DPF outlet.
3 Take a photograph of the DEF injector mount on the DPF outlet and the tip of the DEF injector.
4 Install the injector on the beaker.
5 Run the DEF System Dosing Accuracy test through Cat® Electronic Technician (ET).
6 Use the beaker to measure the amount of fluid from the dosing test. ml
7 Repeat the test to verify consistency. ml
8 Install the injector back onto the DPF outlet.

Have questions with 105007-1360?





Group cross 105007-1360 ZEXEL

Mitsubishi 

9 432 610 295 
NP-DN10PDN130 
ME731688 
NOZZLE
9 432 610 295 
NP-DN10PDN130 
MD620889 
NOZZLE
9 432 610 295 
NP-DN10PDN130 
ME994973 
NOZZLE

Isuzu 

9 432 610 310 
NP-DN0PDN131 
8971074440 
NOZZLE
9 432 610 443 
DN0PD1 JAPAN 
 
PINTLE NOZZLE

Isuzu 

9 432 610 327 
NP-DN0PDN133 
8971296440 
NOZZLE

Iseki 

9 432 610 327 
NP-DN0PDN133 
62153110280 
NOZZLE
9 432 610 327 
NP-DN0PDN133 
62153110280A 
NOZZLE

Ishikawajima-S 

9 432 610 327 
NP-DN0PDN133 
131416270 
NOZZLE

Mitsubishi 

9 432 610 477 
NP-DN0PDN134 
ME738502 
NOZZLE
9 432 610 478 
NP-DN10PDN135 
ME738945 
NOZZLE
9 432 610 478 
NP-DN10PDN135 
ME994978 
NOZZLE

Isuzu 

105007-1360  
9 432 610 421 
NP-DN0PDN136 
8971431900 
NOZZLE
 
8981631250 
NOZZLE

Mazda 

 
RF1G13TW0 
NOZZLE
9 432 612 000 
DN0PD2 JAPAN 
 
NOZZLE
Back to top