Information nozzle
BOSCH
9 432 610 003
9432610003
ZEXEL
105000-1740
1050001740
ISUZU
5153110210
5153110210

Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
4 pieces DN0SD193 fuel diesel injection nozzle 093400-1310 DN0SD193 DNOSD193 0434250063
RHEOFCHS Ideal Replacement: Made with materials and precision-designed, suitable for specific vehicles, helping to improve power and smooth operation. || KEY FUNCTION: The primary function of a fuel injector is to deliver precise amounts of fuel into the engine's combustion chamber at the appropriate time. It atomizes the fuel into a fine mist and sprays it directly into the intake manifold or cylinder, ensuring efficient mixing with incoming air for combustion. || QUALITY CONTROL: Stringent quality control measures are implemented throughout the manufacturing process to ensure the reliability and performance of the fuel injectors. This includes inspections, functional tests, and flow rate measurements to maintain consistent quality standards. || NOTE: Please make sure that the model number, part number and photo is the same as yours. To Avoid placing wrong orders and wasting your precious time. The Injector calibration codes are located on the top of the product as shown in Picture. Professional installation is highly recommend.
RHEOFCHS Ideal Replacement: Made with materials and precision-designed, suitable for specific vehicles, helping to improve power and smooth operation. || KEY FUNCTION: The primary function of a fuel injector is to deliver precise amounts of fuel into the engine's combustion chamber at the appropriate time. It atomizes the fuel into a fine mist and sprays it directly into the intake manifold or cylinder, ensuring efficient mixing with incoming air for combustion. || QUALITY CONTROL: Stringent quality control measures are implemented throughout the manufacturing process to ensure the reliability and performance of the fuel injectors. This includes inspections, functional tests, and flow rate measurements to maintain consistent quality standards. || NOTE: Please make sure that the model number, part number and photo is the same as yours. To Avoid placing wrong orders and wasting your precious time. The Injector calibration codes are located on the top of the product as shown in Picture. Professional installation is highly recommend.
4PCS DN12SD12 DN4SD24 DN0SD2110 DN0SDN136 DN0SD193 DN4SDND133 DN4SD24ND80 DN0SD211 SD Series Diesel Engine Injector Nozzle - (Color: DN4SD24)
Generic Color: DN4SD24
Generic Color: DN4SD24
You can express buy:
Images:
US $4.00
[08-Dec-2016]
US $4.00
[10-Apr-2017]
Include in #1:
101441-9040
as NOZZLE
Include in #2:
104740-1023
as NOZZLE
Cross reference number
Zexel num
Bosch num
Firm num
Name
Information:
Installation Procedure
Illustration 1 g06124125
Remove plate (1) and discard. Save the hardware and hook assembly (2) for reuse.
Illustration 2 g06124137
(3) 5I-3822 Plate
Weld plate (3) in the location specified in Illustration 2.
Illustration 3 g06124150
Remove two hoses (4).
Illustration 4 g06124157
(5) 467-9635 Hose
(6) 428-8808 Hose Clamp
(7) 418-2057 Hose
(8) 467-9634 Hose
(9) 5P-4924 Elbow
(10) 6V-3250 O-Ring Seal
(11) 424-1209 Tank
Install hose (7) and two hose clamps (6). Slowly tighten the clamps to 6.6 0.2 N m (58 1.8 lb in).
Install one end of hose (5) on the coolant tube and the other on tank (11). Secure the hose using two hose clamps (6). Slowly tighten the clamps to 6.6 0.2 N m (58 1.8 lb in).
Install elbow (9) and O-ring (10) onto tank (11). Tighten the elbow to 28 4 N m (21 3 lb ft).
Install hose (8) as shown using two hose clamps (6). Slowly tighten the clamps to 6.6 0.2 N m (58 1.8 lb in). Ensure the hoses connected to the tank are in parallel as shown in view D-D.
Illustration 5 g06124173
(12) 326-4516 Cable Tie
(13) 454-4235 Plate
Secure the hoses as shown using two cable ties (12) and plate (13).
Illustration 6 g06124183
(14) 511-8273 Sheet As
Install sheet (14) and hook assembly (2) using the saved hardware.
Illustration 7 g06124176
(11) 424-1209 Tank
(15) 467-9640 Plate As
(16) 8T-4136 Bolt
(17) 8T-4121 Hard Washer
(18) 8T-4189 Bolt
(19) 8T-4224 Hard Washer
Install plate assembly (15) using three bolts (16) and three washers (17).
Mount tank (11) onto plate (15) using two bolts (18) and two washers (19).
Install new machine, engine, and after treatment software. The new software is available in the form of a flash file through the Caterpillar Service Information System (SIS). SIS web only displays the latest available flash file.
Illustration 8 g06123932
Update the DES threshold to 525 degrees C using Cat® Electronic Technician (Cat ET). A factory password is required to change the value. A factory password can be obtained after inputting your Corporate Web Security (CWS) identification.
Illustration 1 g06124125
Remove plate (1) and discard. Save the hardware and hook assembly (2) for reuse.
Illustration 2 g06124137
(3) 5I-3822 Plate
Weld plate (3) in the location specified in Illustration 2.
Illustration 3 g06124150
Remove two hoses (4).
Illustration 4 g06124157
(5) 467-9635 Hose
(6) 428-8808 Hose Clamp
(7) 418-2057 Hose
(8) 467-9634 Hose
(9) 5P-4924 Elbow
(10) 6V-3250 O-Ring Seal
(11) 424-1209 Tank
Install hose (7) and two hose clamps (6). Slowly tighten the clamps to 6.6 0.2 N m (58 1.8 lb in).
Install one end of hose (5) on the coolant tube and the other on tank (11). Secure the hose using two hose clamps (6). Slowly tighten the clamps to 6.6 0.2 N m (58 1.8 lb in).
Install elbow (9) and O-ring (10) onto tank (11). Tighten the elbow to 28 4 N m (21 3 lb ft).
Install hose (8) as shown using two hose clamps (6). Slowly tighten the clamps to 6.6 0.2 N m (58 1.8 lb in). Ensure the hoses connected to the tank are in parallel as shown in view D-D.
Illustration 5 g06124173
(12) 326-4516 Cable Tie
(13) 454-4235 Plate
Secure the hoses as shown using two cable ties (12) and plate (13).
Illustration 6 g06124183
(14) 511-8273 Sheet As
Install sheet (14) and hook assembly (2) using the saved hardware.
Illustration 7 g06124176
(11) 424-1209 Tank
(15) 467-9640 Plate As
(16) 8T-4136 Bolt
(17) 8T-4121 Hard Washer
(18) 8T-4189 Bolt
(19) 8T-4224 Hard Washer
Install plate assembly (15) using three bolts (16) and three washers (17).
Mount tank (11) onto plate (15) using two bolts (18) and two washers (19).
Install new machine, engine, and after treatment software. The new software is available in the form of a flash file through the Caterpillar Service Information System (SIS). SIS web only displays the latest available flash file.
Illustration 8 g06123932
Update the DES threshold to 525 degrees C using Cat® Electronic Technician (Cat ET). A factory password is required to change the value. A factory password can be obtained after inputting your Corporate Web Security (CWS) identification.