Information injector
ZEXEL
107750-0650
1077500650
NISSAN-DIESEL
16600VZ20A
16600vz20a

Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
New Fuel Injector 16600-VZ20A 16600-VZ20B Compatible with ZD30 Dci Urvan Caravan Cabstar 3.0
GENERIC Product name: Fuel Injector || Warranty:1year || Compatible with Nissan ZD30 Dci Urvan Caravan Cabstar Navara 3.0
GENERIC Product name: Fuel Injector || Warranty:1year || Compatible with Nissan ZD30 Dci Urvan Caravan Cabstar Navara 3.0
New Fuel Injector 16600-VZ20A 16600-VZ20B Compatible with ZD30 Dci Urvan Caravan Cabstar 3.0
XYZLQGYPAS Product name: Fuel Injector || Warranty:1year || Compatible with Nissan ZD30 Dci Urvan Caravan Cabstar Navara 3.0
XYZLQGYPAS Product name: Fuel Injector || Warranty:1year || Compatible with Nissan ZD30 Dci Urvan Caravan Cabstar Navara 3.0
0445110315 Diesel Fuel Injector Nozzle Compatible For Nissan Zd30 Dci Urvan Caravan Cabstar 3.0 Common Rail Injector 16600-VZ20A
LIZVIZ Easy to install and adjust || Durable and Long Service Life || Part type: diesel injector common rail injector assembly || Reduce noise, increase power, and reduce fuel consumption || 0445110315 Diesel Fuel Injector Nozzle Compatible For Nissan Zd30 Dci Urvan Caravan Cabstar 3.0 Common Rail Injector 16600-VZ20A
LIZVIZ Easy to install and adjust || Durable and Long Service Life || Part type: diesel injector common rail injector assembly || Reduce noise, increase power, and reduce fuel consumption || 0445110315 Diesel Fuel Injector Nozzle Compatible For Nissan Zd30 Dci Urvan Caravan Cabstar 3.0 Common Rail Injector 16600-VZ20A
You can express buy:
Images:
USD 222
[06-Jun-2019]
USD 355
[23-Jan-2019]
USD 180
[11-Jun-2019]
USD 185
[15-Jun-2018]
Cross reference number
Zexel num
Bosch num
Firm num
Name
107750-0650
16600VZ20A NISSAN-DIESEL
INJECTOR
* C
* C
Information:
1. Remove fuel line (1) from the fuel transfer pump.2. Put caps in the fuel line openings to prevent fuel system contamination.3. Remove bolts (2), and remove fuel transfer pump (3). Check the condition of the O-ring seal on the fuel transfer pump. If necessary, make a replacement. The following steps are for installation of the fuel transfer pump.4. Be sure the O-ring seal is in position on the fuel transfer pump. Put clean engine oil on the O-ring seal.5. Put fuel transfer pump (3) in position, and install the bolts that hold it in place.6. Remove the caps from the fuel line openings, and install fuel line (1).Disassemble Fuel Transfer Pump
Start By:a. remove fuel transfer pump 1. Remove seal (1) from the fuel transfer pump.
Cover (2) is under spring tension. Remove the bolts that hold cover (2) slowly to prevent injury.
2. Remove bolts (3) and cover (2) from the housing. 3. Remove seals (4) and valve (5) from cover (2). 4. Remove spring (6) from the piston.
Mark the orientation of valve (8) as to its location in the housing.
5. Remove washer (7), valve (8) and the seal from the housing. 6. Remove piston (9) and sleeve (10) from the housing. 7. Remove seal (11) from sleeve (12). 8. Remove guide and tappet assembly (13) from the housing. 9. Remove seal (14) from guide (15).
If tappet (17) or the guide are damaged or worn, they must be replaced as a unit.
10. Remove ring (16) from tappet (17) and the tappet from guide (15). 11. Remove the bolts and cover (18) from the housing. 12. Remove seal (19) from cover (18). 13. Remove valve (20) from the housing if necessary.Assemble Fuel Transfer Pump
1. Install valve (20) in housing as shown. 2. Put clean fuel on seal (19), and install it on cover (18).3. Install cover (18) on the housing.
The tappet and guide must be serviced as a unit.
4. Install tappet (17) in guide (15). Install ring (16) on tappet (17) to hold the tappet in the guide. 5. Put clean fuel on seal (14), and install it on guide and tappet assembly (13).6. Install guide and tappet assembly (13) in the housing as shown. 7. Put clean fuel on seal (11), and install it on sleeve (12).8. Install sleeve (12) in the housing. 9. Install piston (9) in the housing. 10. Install seal, valve (8) and washer (7) in the housing as shown. Be sure valve (8) is the correct position in the housing. 11. Install spring (6) in the piston. 12. Install valve (5) in cover (2) as shown.13. Put clean fuel on seals (4), and put them in position on cover (2).14. Install cover (2) on the housing. 15. Put seal (1) in position on the fuel transfer pump.16. Install the fuel transfer pump on the fuel injection pump housing.End By:a. install fuel transfer pump
Start By:a. remove fuel transfer pump 1. Remove seal (1) from the fuel transfer pump.
Cover (2) is under spring tension. Remove the bolts that hold cover (2) slowly to prevent injury.
2. Remove bolts (3) and cover (2) from the housing. 3. Remove seals (4) and valve (5) from cover (2). 4. Remove spring (6) from the piston.
Mark the orientation of valve (8) as to its location in the housing.
5. Remove washer (7), valve (8) and the seal from the housing. 6. Remove piston (9) and sleeve (10) from the housing. 7. Remove seal (11) from sleeve (12). 8. Remove guide and tappet assembly (13) from the housing. 9. Remove seal (14) from guide (15).
If tappet (17) or the guide are damaged or worn, they must be replaced as a unit.
10. Remove ring (16) from tappet (17) and the tappet from guide (15). 11. Remove the bolts and cover (18) from the housing. 12. Remove seal (19) from cover (18). 13. Remove valve (20) from the housing if necessary.Assemble Fuel Transfer Pump
1. Install valve (20) in housing as shown. 2. Put clean fuel on seal (19), and install it on cover (18).3. Install cover (18) on the housing.
The tappet and guide must be serviced as a unit.
4. Install tappet (17) in guide (15). Install ring (16) on tappet (17) to hold the tappet in the guide. 5. Put clean fuel on seal (14), and install it on guide and tappet assembly (13).6. Install guide and tappet assembly (13) in the housing as shown. 7. Put clean fuel on seal (11), and install it on sleeve (12).8. Install sleeve (12) in the housing. 9. Install piston (9) in the housing. 10. Install seal, valve (8) and washer (7) in the housing as shown. Be sure valve (8) is the correct position in the housing. 11. Install spring (6) in the piston. 12. Install valve (5) in cover (2) as shown.13. Put clean fuel on seals (4), and put them in position on cover (2).14. Install cover (2) on the housing. 15. Put seal (1) in position on the fuel transfer pump.16. Install the fuel transfer pump on the fuel injection pump housing.End By:a. install fuel transfer pump
Have questions with 107750-0650?
Group cross 107750-0650 ZEXEL
Honda
Komatsu
Nissan-Diesel
Nissan-Diesel
107750-0650
16600VZ20A
INJECTOR