106861-0643 ZEXEL INJECTION-PUMP ASSEMBLY Cross 1068610643


 

Information injection-pump assembly

ZEXEL 106861-0643 1068610643
106861-0643 INJECTION-PUMP ASSEMBLY
Rating:
56
Buy INJECTION-PUMP ASSEMBLY 106861-0643 zexel genuine, new aftermarket engine parts with delivery

Service parts 106861-0643 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106086-5600
3. GOVERNOR 105306-0611
4. SUPPLY PUMP 105217-1880
5. AUTOM. ADVANCE MECHANIS 105636-0280
6. COUPLING PLATE 105662-0602
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-4880
11. Nozzle and Holder 16600-97015
12. Open Pre:MPa(Kqf/cm2) 19.6{200}
13. NOZZLE-HOLDER 105031-4210
14. NOZZLE 105015-4530
15. NOZZLE SET

Include in #1:

106861-0643 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num
Bosch num
Firm num
Name
106861-0643 
 
   
INJECTION-PUMP ASSEMBLY
14CD PE8P PE




Information:

(1) Thickness of spacer plate ... 9.970 0.025 mm (.3925 .0010 in.) Thickness of spacer plate gasket ... 0.208 0.025 mm (.0082 .0010 in.) For height of liner over top of spacer plate make reference to Cylinder Liner Projection.(2) Camshaft bearing bore (installed) ... 58.80 0.06 mm (2.315 .002 in.) Bore in block for camshaft bearings ... 65.100 0.025 mm (2.5630 .0010 in.)(3) Bore in block for main bearings (standard size) ... 96.926 0.013 mm (3.8160 .0005 in.) Bore in block for main bearings 0.51 mm (.020 in.) oversize ... 97.436 0.013 mm (3.8361 .0005 in.)(4) Dimension from center of main bearing bore to top of cylinder block (new) ... 383.515 0.165 mm (15.099 .0064 in.)(5) Dimension from center of main bearing bore to bottom of cylinder block (new) ... 153.99 0.10 mm (6.063 .004 in.)(6) Torque for bolts holding bearing caps for main bearings: a. Put 2P2506 Thread Lubricant on threads and washer face.b. Tighten all bolts to ... 41 4 N m (30 3 lb ft)c. Put a mark on each bolt and cap.d. Tighten all bolts from mark ... 90 5° Install bearing caps with the part number toward the front of the engine. Be sure that the mark (number) on the bearing cap next to the bolt hole is in agreement with the mark in the cylinder block.(7) Clearance between main bearing cap and cylinder block ... 0.033 mm (.0013 in.)tight to ... 0.043 mm (.0017 in.) loose Main bearing cap width ... 165.095 0.020 mm (6.4998 .0008 in.)Width of cylinder block for main bearing cap ... 165.100 0.018 mm (6.5000 .0007 in.) (8) Piston cooling orifice.
There are holes in the bores for the main bearings, between the cylinders for piston cooler orifices. These holes must have orifices (8) installed.
(9) Distance two dowels extend from the surface of the cylinder block ... 19.8 0.5 mm (.78 .02 in.)(10) Distance hollow dowel extends from the surface of the cylinder block ... 16.0 0.5 mm (.63 .02 in.)(11) Depth to install two dowels below the surface of the cylinder block (apply loctite #11358) ... 1.0 0.5 mm (.04 .02 in.)(12) Distance dowels extend from the front face of the cylinder block ... 22.4 0.5 mm (.88 .02 in.)(13) Distance stud extends from the front face of the cylinder block ... 15.7 0.5 mm (.62 .02 in.)(14) Distance two dowels extend from the rear face of the cylinder block ... 12.7 0.5 mm (.50 .02 in.)

Have questions with 106861-0643?





Group cross 106861-0643 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 617 945 
1670097604 
INJECTION-PUMP ASSEMBLY
RD8
 
1670097605 
INJECTION-PUMP ASSEMBLY
D158X
 
1671397601 
INJECTION-PUMP ASSEMBLY
D158X
 
1679097504 

RD8
 
1670097607 
INJECTION-PUMP ASSEMBLY
RD8
 
 
INJECTION-PUMP ASSEMBLY
106861-0643  
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 617 946 
1670097566 
INJECTION-PUMP ASSEMBLY
RD8
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 617 947 
1671397602 
INJECTION-PUMP ASSEMBLY
RD8
 
1671397603 
INJECTION-PUMP ASSEMBLY
RD8T
 
1671797503 
INJECTION-PUMP ASSEMBLY
RD8
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
1671797504 
INJECTION-PUMP ASSEMBLY
RD8
 
1670097606 
INJECTION-PUMP ASSEMBLY
RD8T
 
1670097609 
INJECTION-PUMP ASSEMBLY
RD8T
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 617 948 
1670097565 
INJECTION-PUMP ASSEMBLY
RD8T
 
1670097560 
INJECTION-PUMP ASSEMBLY
RD8
 
1670097567 
INJECTION-PUMP ASSEMBLY
RD8
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 617 949 
1670097610 
INJECTION-PUMP ASSEMBLY
RD8
Back to top