106679-2000 ZEXEL INJECTION-PUMP ASSEMBLY Cross 1066792000 0429040901


 

Information injection-pump assembly

ZEXEL 106679-2000 1066792000
  0429040901
106679-2000 INJECTION-PUMP ASSEMBLY
Rating:
54
Buy INJECTION-PUMP ASSEMBLY 106679-2000 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
106679-2000 
 
0429040901   
INJECTION-PUMP ASSEMBLY
S12A *




Information:

Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
There have been some instances of the following active diagnostic codes:
651-6 Engine Injector Cylinder #01 : Current Above Normal
652-6 Engine Injector Cylinder #02 : Current Above Normal
653-6 Engine Injector Cylinder #03 : Current Above Normal
654-6 Engine Injector Cylinder #04 : Current Above NormalThe engine will be derated and will be difficult to start.Solution
Follow the correct troubleshooting procedure for the active diagnostic codes. Refer to Troubleshooting, Injector Solenoid - Test.
If the troubleshooting procedure identifies suspect injectors, use the electronic service tool to generate a Product Status Report (PSR). Select the "Histogram" option when generating the PSR.
Install replacement 418-3229 Fuel Injector Gp, as required. Refer to Disassembly and Assembly, Electronic Unit Injector - Remove and Disassembly and Assembly, Electronic Unit Injector - Install.
Use 169-7372 Fluid Sampling Bottles to obtain a fuel sample from the following locations:
Machine fuel tank ( 355 mL (12 oz)
Bulk fuel supply tank ( 355 mL (12 oz)Analyze the fuel sample. The fuel samples will need to be analyzed for the following properties:
Lubricity Wear Scar - "ASTM D6079" or "ISO 12156"
Density at 15° C (59° F) - "ASTM D1298", "ASTM D4052", "ISO 3675", or "ISO 12185"
Kinematic Viscosity at 40° C (104° F) - "ASTM D445", "ISO 3448", or "ISO 3104"
Sulfur - "ASTM D4294", "ASTM D5185", "ASTM D5453", "ASTM D26222", "ISO 20846", or "ISO 20884"
Water by Distillation - "ASTM D95", "ASTM D6304", "ASTM D2709", "ASTM D1796", or "ISO3734"
Cloud Point - "ASTM D2500" or "ISO 3015"
FAME - "EN 14078", "ASTM D7806", or "ASTM D7371"
Oxidation Stability - "EN 14112"
Copper - "ASTM D7111"
Sodium - "ASTM D7111"
Zinc - "ASTM D7111"
Calcium - "ASTM D7111"
Potassium - "ASTM D7111"Provide the results of the fuel sample.
Retain any removed injectors. The injectors will be requested for return through the "Send It Back" (SIB) process.
Submit the PSR along with TIB Media number, M0085259, and CPI number 386169 through "CPI Feedback" within the Service Information Management System (SIMSi).

Have questions with 106679-2000?





Group cross 106679-2000 ZEXEL

106679-2000  
 
0429040901 
INJECTION-PUMP ASSEMBLY
S12A

Mitsubishi-Heav 

9 400 617 468 
3266501160 
INJECTION-PUMP ASSEMBLY
S12A
 
3626107130 
INJECTION-PUMP ASSEMBLY
S6B
9 400 617 469 
3626117130 
INJECTION-PUMP ASSEMBLY
S6B
 
3256502030 
INJECTION-PUMP ASSEMBLY
S6A
 
3256502031 
INJECTION-PUMP ASSEMBLY
S6A
9 400 617 470 
3256502032 
INJECTION-PUMP ASSEMBLY
S6A
 
3266511160 
INJECTION-PUMP ASSEMBLY
S12A
 
3266511161 
INJECTION-PUMP ASSEMBLY
S12A
 
3266511162 
INJECTION-PUMP ASSEMBLY
S12A
9 400 617 471 
3266521160 
INJECTION-PUMP ASSEMBLY
S12A
 
3266512050 
INJECTION-PUMP ASSEMBLY
S12A
 
3266512051 
INJECTION-PUMP ASSEMBLY
S12A
 
3266512052 
INJECTION-PUMP ASSEMBLY
S12A
9 400 617 472 
3266522050 
INJECTION-PUMP ASSEMBLY
S12A
 
3266511030 
INJECTION-PUMP ASSEMBLY
S12A
 
3266511031 
INJECTION-PUMP ASSEMBLY
S12A
 
3266511032 
INJECTION-PUMP ASSEMBLY
S12A
 
3266521030 
INJECTION-PUMP ASSEMBLY
S12A
 
3266531030 
INJECTION-PUMP ASSEMBLY
S12A
 
3266541030 
INJECTION-PUMP ASSEMBLY
S12A
9 400 617 473 
3266551030 
INJECTION-PUMP ASSEMBLY
S12A
 
3629808900 
INJECTION-PUMP ASSEMBLY
S6B
 
3626500190 
INJECTION-PUMP ASSEMBLY
S6B
 
3626500191 
INJECTION-PUMP ASSEMBLY
S6B
 
3626500192 
INJECTION-PUMP ASSEMBLY
S6B
Back to top