Fuel injectors
  1. Home
  2. injection
  3. #1047413381

104741-3381 ZEXEL 9 460 611 268 BOSCH INJECTION-PUMP ASSEMBLY 9460611268 1047413381 me201820


 

Information injection-pump assembly

BOSCH 9 460 611 268 9460611268
ZEXEL 104741-3381 1047413381
MITSUBISHI ME201820 me201820
104741-3381 INJECTION-PUMP ASSEMBLY
Rating:
48
Buy INJECTION-PUMP ASSEMBLY 104741-3381 zexel genuine, new aftermarket engine parts with delivery

Components :

0. INJECTION-PUMP ASSEMBLY 104741-3381
1. _
2. FUEL INJECTION PUMP 104641-3381
3. NUMBER PLATE 146970-6700
4. _ 146672-2820
5. CAPSULE
6. ADJUSTING DEVICE
7. NOZZLE AND HOLDER ASSY 105148-1301
8. Nozzle and Holder ME200204
9. Open Pre:MPa(Kqf/cm2) 14.7{150}
10. NOZZLE-HOLDER 105078-0181
11. NOZZLE 105007-1290

Scheme ###:

PACKING RING
1/6. [1] 146601-0700 PACKING RING
6. [1] 146100-0220 SUPPLY PUMP
9. [1] 146103-0100 COVER
10. [2] 139104-0000 FLAT-HEAD SCREW
12. [1] 146200-0320 DRIVE SHAFT
12/1. [1] 146200-0300 DRIVE SHAFT
12/2. [1] 146201-0000 WOODRUFF KEY
12/3. [2] 146202-0100 DAMPER
12/4. [1] 146203-0000 TOOTHED GEAR
17. [1] 146204-0000 PLAIN WASHER
20. [1] 146210-3520 ROLLER SET
24. [1] 146303-0000 BEARING PIN
25. [1] 146304-0000 BEARING PIN
26. [1] 146305-0000 CLAMPING BAND
27. [1] 146205-0000 SLOTTED WASHER
29. [1] 146220-3220 CAM PLATE
30. [1] 146600-3000 O-RING
31. [1] 146311-8520 PUMP PLUNGER
32. [1] 146301-0000 SLIDING PIECE
34. [1] 146312-5000 COMPRESSION SPRING
34B. [1] 146312-5100 COMPRESSION SPRING
34C. [1] 146312-5200 COMPRESSION SPRING
35/1. [1] 146690-3200 SHIM D11.5&9.4T0.1
35/1. [1] 146690-3300 SHIM D11.5&9.4T0.2
35/1. [1] 146690-3400 SHIM D11.5&9.4T0.25
35/1. [1] 146690-3500 SHIM D11.5&9.4T1.0
35/1. [1] 146690-4100 SHIM D11.5&9.4T2
35/1. [1] 146690-4200 SHIM D11.5&9.4T0.5
35/1. [1] 146690-4300 SHIM D11.5&9.4T0.75
36. [1] 146600-3000 O-RING
37. [1] 146310-4020 COVER
38. [2] 146620-5000 BLEEDER SCREW
39. [1] 146310-5100 COVER
40. [2] 146620-5000 BLEEDER SCREW
41. [1] 146312-2000 COMPRESSION SPRING
43. [1] 146230-0000 SHIM
44. [1] 146230-0100 PLAIN WASHER
45. [1] 146231-0001 SLOTTED WASHER
47. [2] 146233-0000 SLOTTED WASHER
48/1. [1] 146603-0000 SHIM D17.0&5.2T0.50
48/1. [1] 146603-0100 SHIM D17.0&5.2T0.80
48/1. [1] 146603-0200 SHIM D17.0&5.2T1.00
48/1. [1] 146603-0300 SHIM D17.0&5.2T1.20
48/1. [1] 146603-0400 SHIM D17.0&5.2T1.50
48/1. [1] 146603-0500 SHIM D17.0&5.2T1.80
48/1. [1] 146603-0600 SHIM D17.0&5.2T2.00
48/1. [1] 146690-1400 SHIM D17&5.2T0.9
48/1. [1] 146690-1500 SHIM D17&5.2T1.1
48/1. [1] 146690-1600 SHIM D17&5.2T1.3
48/1. [1] 146690-1700 SHIM D17&5.2T1.4
48/1. [1] 146690-1800 SHIM D17&5.2T1.6
48/1. [1] 146690-1900 SHIM D17&5.2T1.7
48/1. [1] 146690-5800 SHIM
48/1. [1] 146690-5900 SHIM
48/1. [1] 146690-6000 SHIM
48/1. [1] 146690-6100 SHIM
48/1. [1] 146690-6200 SHIM
48/1. [1] 146690-6300 SHIM
48/1. [1] 146690-6400 SHIM
48/1. [1] 146690-6500 SHIM
48/1. [1] 146690-6600 SHIM
48/1. [1] 146690-6700 SHIM
48/1. [1] 146690-6800 SHIM
48/1. [1] 146690-6900 SHIM
48/1. [1] 146690-7000 SHIM
48/1. [1] 146690-7100 SHIM
48/1. [1] 146690-7200 SHIM
48/1. [1] 146690-7300 SHIM
48/1. [1] 146690-7400 SHIM
48/1. [1] 146690-7500 SHIM
48/1. [1] 146690-7800 SHIM
49. [2] 146234-0120 GUIDE PIN
50. [1] 146403-4920 HYDRAULIC HEAD
50. [1] 146403-4920 HYDRAULIC HEAD
50. [1] 146403-4920 HYDRAULIC HEAD
51. [1] 146600-0000 O-RING
52/1. [1] 146420-0000 SHIM D9.5&3.0T1.90
52/1. [1] 146420-0100 SHIM D9.5&3.0T1.92
52/1. [1] 146420-0200 SHIM D9.5&3.0T1.94
52/1. [1] 146420-0300 SHIM D9.5&3.0T1.96
52/1. [1] 146420-0400 SHIM D9.5&3.0T1.98
52/1. [1] 146420-0500 SHIM D9.5&3.0T2.00
52/1. [1] 146420-0600 SHIM D9.5&3.0T2.02
52/1. [1] 146420-0700 SHIM D9.5&3.0T2.04
52/1. [1] 146420-0800 SHIM D9.5&3.0T2.06
52/1. [1] 146420-0900 SHIM D9.5&3.0T2.08
52/1. [1] 146420-1000 SHIM D9.5&3.0T2.10
52/1. [1] 146420-1100 SHIM D9.5&3.0T2.12
52/1. [1] 146420-1200 SHIM D9.5&3.0T2.14
52/1. [1] 146420-1300 SHIM D9.5&3.0T2.16
52/1. [1] 146420-1400 SHIM D9.5&3.0T2.18
52/1. [1] 146420-1500 SHIM D9.5&3.0T2.20
52/1. [1] 146420-1600 SHIM D9.5&3.0T2.22
52/1. [1] 146420-1700 SHIM D9.5&3.0T2.24
52/1. [1] 146420-1800 SHIM D9.5&3.0T2.26
52/1. [1] 146420-1900 SHIM D9.5&3.0T2.28
52/1. [1] 146420-2000 SHIM D9.5&3.0T2.30
52/1. [1] 146420-2100 SHIM D9.5&3.0T2.32
52/1. [1] 146420-2200 SHIM D9.5&3.0T2.34
52/1. [1] 146420-2300 SHIM D9.5&3.0T2.36
52/1. [1] 146420-2400 SHIM D9.5&3.0T2.38
52/1. [1] 146420-2500 SHIM D9.5&3.0T2.40
52/1. [1] 146420-2600 SHIM D9.5&3.0T2.42
52/1. [1] 146420-2700 SHIM D9.5&3.0T2.44
52/1. [1] 146420-2800 SHIM D9.5&3.0T2.46
52/1. [1] 146420-2900 SHIM D9.5&3.0T2.48
52/1. [1] 146420-3000 SHIM D9.5&3.0T2.50
52/1. [1] 146420-3100 SHIM D9.5&3.0T2.52
52/1. [1] 146420-3200 SHIM D9.5&3.0T2.54
52/1. [1] 146420-3300 SHIM D9.5&3.0T2.56
52/1. [1] 146420-3400 SHIM D9.5&3.0T2.58
52/1. [1] 146420-3500 SHIM D9.5&3.0T2.60
52/1. [1] 146420-3600 SHIM D9.5&3.0T2.62
52/1. [1] 146420-3700 SHIM D9.5&3.0T2.64
52/1. [1] 146420-3800 SHIM D9.5&3.0T2.66
52/1. [1] 146420-3900 SHIM D9.5&3.0T2.68
52/1. [1] 146420-4000 SHIM D9.5&3.0T2.70
52/1. [1] 146420-4100 SHIM D9.5&3.0T2.72
52/1. [1] 146420-4200 SHIM D9.5&3.0T2.74
52/1. [1] 146420-4300 SHIM D9.5&3.0T2.76
52/1. [1] 146420-4400 SHIM D9.5&3.0T2.78
52/1. [1] 146420-4500 SHIM D9.5&3.0T2.80
52/1. [1] 146420-4600 SHIM D9.5&3.0T2.82
52/1. [1] 146420-4700 SHIM D9.5&3.0T2.84
52/1. [1] 146420-4800 SHIM D9.5&3.0T2.86
52/1. [1] 146420-4900 SHIM D9.5&3.0T2.88
52/1. [1] 146420-5000 SHIM D9.5&3.0T2.90
52/1. [1] 146420-5100 SHIM D9.5&3.0T1.74
52/1. [1] 146420-5200 SHIM D9.5&3.0T1.76
52/1. [1] 146420-5300 SHIM D9.5&3.0T1.78
52/1. [1] 146420-5400 SHIM D9.5&3.0T1.80
52/1. [1] 146420-5500 SHIM D9.5&3.0T1.82
52/1. [1] 146420-5600 SHIM D9.5&3.0T1.84
52/1. [1] 146420-5700 SHIM D9.5&3.0T1.86
52/1. [1] 146420-5800 SHIM D9.5&3.0T1.88
54. [4] 146433-0100 GASKET D12&6.4T1.00
55. [4] 146430-4820 DELIVERY-VALVE ASSEMBLY
56. [4] 146432-0000 COMPRESSION SPRING
58. [4] 146440-0720 FITTING
60. [3] 139106-0100 FLAT-HEAD SCREW
66. [1] 146600-0100 O-RING
67. [1] 146703-6920 COMPENSATOR,MANIFOLD-PRES
67/1. [1] 146805-8220 GOVERNOR COVER
67/14. [1] 146621-1700 UNION NUT
67/16. [1] 146526-3000 BLEEDER SCREW
67/23. [1] 146925-7520 BRACKET
67/24. [2] 010206-2240 HEX-SOCKET-HEAD CAP SCREW
67/31. [1] 146710-0700 BUSHING
67/32. [1] 146711-0000 PLATE
67/33. [1] 139218-0400 UNION NUT
67/34. [1] 146712-0700 BEARING PIN
67/35. [1] 146621-0300 UNION NUT
67/36. [1] 146600-1400 O-RING
67/37. [1] 146710-0100 BUSHING
67/38. [1] 139506-0200 GASKET D8.9&6.8T1.00
67/39. [1] 146620-0300 CAPSULE
67/40. [1] 026512-1540 GASKET D15.4&12.2T1.50
67/41. [1] 146713-4300 ADJUSTING PIN
67/42. [2] 146714-0200 PLATE
67/43. [1] 146715-0300 DIAPHRAGM
67/44. [1] 139306-0100 LOCKING WASHER
67/45. [1] 013030-6040 UNION NUT M6P1H3.6
67/46. [1] 146716-0000 UNION NUT
67/47. [1] 146717-2900 COILED SPRING
67/48/1. [1] 146720-3000 SPACER BUSHING L3.7
67/48/1. [1] 146720-3100 SPACER BUSHING L3.9
67/48/1. [1] 146720-3200 SPACER BUSHING L4.1
67/48/1. [1] 146720-3300 SPACER BUSHING L4.3
67/48/1. [1] 146720-3400 SPACER BUSHING L4.5
67/48/1. [1] 146720-3500 SPACER BUSHING L4.7
67/48/1. [1] 146720-3600 SPACER BUSHING L4.9
67/48/1. [1] 146720-3700 SPACER BUSHING L5.1
67/48/1. [1] 146720-3800 SPACER BUSHING L5.3
67/48/1. [1] 146720-3900 SPACER BUSHING L5.5
67/48/1. [1] 146720-4000 SPACER BUSHING L5.7
67/48/1. [1] 146720-4100 SPACER BUSHING L5.9
67/48/1. [1] 146720-4200 SPACER BUSHING L6.1
67/48/1. [1] 146720-4300 SPACER BUSHING L6.3
67/48/1. [1] 146720-4400 SPACER BUSHING L6.5
67/48/1. [1] 146720-8900 SPACER BUSHING L6.7
67/48/1. [1] 146720-9000 SPACER BUSHING L6.9
67/48/1. [1] 146720-9100 SPACER BUSHING L7.1
67/48/1. [1] 146720-9200 SPACER BUSHING L7.3
67/48/1. [1] 146720-9300 SPACER BUSHING L7.5
67/48/1. [1] 146720-9400 SPACER BUSHING L7.7
67/48/1. [1] 146720-9500 SPACER BUSHING L7.9
67/48/1. [1] 146720-9600 SPACER BUSHING L8.1
67/48/1. [1] 146720-9700 SPACER BUSHING L8.3
67/48/1. [1] 146720-9800 SPACER BUSHING L8.5
67/48/1. [1] 146720-9900 SPACER BUSHING L3.6
67/48/1. [1] 146725-0000 SPACER BUSHING L3.8
67/48/1. [1] 146725-0100 SPACER BUSHING L4.0
67/48/1. [1] 146725-0200 SPACER BUSHING L4.2
67/48/1. [1] 146725-0300 SPACER BUSHING L4.4
67/48/1. [1] 146725-0400 SPACER BUSHING L4.6
67/48/1. [1] 146725-0500 SPACER BUSHING L4.8
67/48/1. [1] 146725-0600 SPACER BUSHING L5.0
67/48/1. [1] 146725-0700 SPACER BUSHING L5.2
67/48/1. [1] 146725-0800 SPACER BUSHING L5.4
67/48/1. [1] 146725-0900 SPACER BUSHING L5.6
67/48/1. [1] 146725-1000 SPACER BUSHING L5.8
67/48/1. [1] 146725-1100 SPACER BUSHING L6.0
67/48/1. [1] 146725-1200 SPACER BUSHING L6.2
67/48/1. [1] 146725-1300 SPACER BUSHING L6.4
67/48/1. [1] 146725-1400 SPACER BUSHING L6.6
67/48/1. [1] 146725-1500 SPACER BUSHING L6.8
67/48/1. [1] 146725-1600 SPACER BUSHING L7.0
67/48/1. [1] 146725-1700 SPACER BUSHING L7.2
67/48/1. [1] 146725-1800 SPACER BUSHING L7.4
67/48/1. [1] 146725-1900 SPACER BUSHING L7.6
67/48/1. [1] 146725-2000 SPACER BUSHING L7.8
67/48/1. [1] 146725-2100 SPACER BUSHING L8.0
67/48/1. [1] 146725-2200 SPACER BUSHING L8.2
67/48/1. [1] 146725-2300 SPACER BUSHING L8.4
67/48/1. [1] 146725-2400 SPACER BUSHING L8.6
67/49. [1] 146721-3621 COVER
67/50. [1] 146722-0200 FLAT-HEAD SCREW
67/51. [1] 146600-0300 O-RING
67/53. [1] 013020-6040 UNION NUT M6P1H5
67/54. [2] 139006-4600 BLEEDER SCREW
67/55. [2] 139006-4800 BLEEDER SCREW
67/56. [1] 146723-0300 CONTROL LEVER
67/57. [1] 146712-0100 BEARING PIN
67/58. [2] 146620-0600 CAPSULE
67/59. [2] 026506-1040 GASKET D9.9&6.2T1
67/60. [1] 146724-0300 ELEMENT
67/61. [1] 146724-0600 CAPSULE
67/64. [1] 146930-8900 BRACKET
67/78. [1] 146600-4400 SEAL RING
67/94. [1] 146663-1300 SPACER BUSHING
67/96. [1] 146933-2520 BRACKET
67/98. [2] 146648-2800 SPACER BUSHING
67/102. [1] 146930-9000 BRACKET
67/112. [1] 146930-9100 BRACKET
67/200. [1] 139308-0300 PLAIN WASHER
67/201. [1] 146545-3400 THREADED PIN L53.00
67/201B. [1] 146545-3500 THREADED PIN L55.00
67/201C. [1] 146545-3600 THREADED PIN L57.00
67/202. [1] 139208-0900 UNION NUT
67/203. [1] 146600-1200 O-RING
68. [1] 146514-8020 CONTROL SHAFT
69. [1] 139310-0200 PLAIN WASHER
72. [1] 146830-8720 CONTROL LEVER
72B. [1] 146830-8820 CONTROL LEVER
73. [1] 014110-6440 LOCKING WASHER
75. [1] 013020-6040 UNION NUT M6P1H5
95. [1] 146865-0520 FULCRUM LEVER
104. [2] 146568-0000 SLOTTED SPRING PIN
105. [2] 026508-1140 GASKET D11.4&8.2T1
106. [2] 146588-0500 COILED SPRING
107. [1] 146569-0300 UNION NUT
108. [1] 146570-0100 GOVERNOR SHAFT
109. [1] 146600-0400 O-RING
110/1. [1] 146571-0000 SHIM D20.2&8.3T1.05
110/1. [1] 146571-0100 SHIM D20.2&8.3T1.25
110/1. [1] 146571-0200 SHIM D20.2&8.3T1.45
110/1. [1] 146571-0300 SHIM D20.2&8.3T1.65
110/1. [1] 146571-0400 SHIM D20.2&8.3T1.85
110/1. [1] 146571-0500 SHIM D20.2&8.3T1.15
110/1. [1] 146571-0600 SHIM D20.2&8.3T1.35
110/1. [1] 146571-0700 SHIM D20.2&8.3T1.55
110/1. [1] 146571-0800 SHIM D20.2&8.3T1.75
111. [1] 146602-0600 PLAIN WASHER D20&8.4T1.40
112. [1] 146572-0020 FLYWEIGHT ASSEMBLY
114. [1] 146602-0500 PLAIN WASHER D17&6.4T1.60
115. [1] 146875-8200 SLIDING SLEEVE
116. [1] 146576-0200 CAP
117/1. [1] 146577-1800 PLUG L2.10
117/1. [1] 146577-1900 PLUG L2.30
117/1. [1] 146577-2000 PLUG L2.50
117/1. [1] 146577-2100 PLUG L2.70
117/1. [1] 146577-2200 PLUG L2.90
117/1. [1] 146577-2300 PLUG L3.10
117/1. [1] 146577-2400 PLUG L3.30
117/1. [1] 146577-2500 PLUG L3.50
117/1. [1] 146577-2600 PLUG L3.70
117/1. [1] 146577-2700 PLUG L3.90
117/1. [1] 146577-2800 PLUG L4.10
117/1. [1] 146577-2900 PLUG L4.30
117/1. [1] 146577-3000 PLUG L4.50
117/1. [1] 146577-3100 PLUG L4.70
117/1. [1] 146577-3200 PLUG L4.90
117/1. [1] 146577-3300 PLUG L5.10
117/1. [1] 146577-6700 PLUG L2.2
117/1. [1] 146577-6800 PLUG L2.4
117/1. [1] 146577-6900 PLUG L2.6
117/1. [1] 146577-7000 PLUG L2.8
117/1. [1] 146577-7100 PLUG L3.0
117/1. [1] 146577-7200 PLUG L3.2
117/1. [1] 146577-7300 PLUG L3.4
117/1. [1] 146577-7400 PLUG L3.6
117/1. [1] 146577-7500 PLUG L3.8
117/1. [1] 146577-7600 PLUG L4.0
117/1. [1] 146577-7700 PLUG L4.2
117/1. [1] 146577-7800 PLUG L4.4
117/1. [1] 146577-7900 PLUG L4.6
117/1. [1] 146577-8000 PLUG L4.8
117/1. [1] 146577-8100 PLUG L5.0
117/1. [1] 146877-0000 PLUG L5.2
117/1. [1] 146877-0100 PLUG L5.3
117/1. [1] 146877-0200 PLUG L5.4
117/1. [1] 146877-0300 PLUG L5.5
117/1. [1] 146877-4700 PLUG
117/1. [1] 146877-4800 PLUG
117/1. [1] 146877-4900 PLUG
117/1. [1] 146877-5000 PLUG
123. [4] 146620-0500 HEX-SOCKET-HEAD CAP SCREW
130. [1] 146421-0020 CAPSULE
130/2. [1] 026508-1140 GASKET D11.4&8.2T1
130/3. [1] 146422-0000 BLEEDER SCREW
130/4. [1] 146600-0500 O-RING
133. [1] 146600-0600 O-RING
134. [1] 146600-0700 O-RING
135. [1] 146110-0220 CONTROL VALVE
135/5. [1] 146114-0000 SPRING WASHER
136. [1] 146650-7620 PULLING ELECTROMAGNET
137. [2] 139514-0200 GASKET
145. [1] 146621-1000 UNION NUT
147. [1] 016520-1210 O-RING
200. [1] 146206-0100 COILED SPRING
205. [1] 029470-4030 WOODRUFF KEY
217. [1] 146542-5300 SLOTTED WASHER
218. [1] 146592-2500 COILED SPRING
219. [1] 146541-3000 BUSHING
220. [1] 146592-2600 COILED SPRING
224. [1] 139006-4400 BLEEDER SCREW
230. [1] 146613-2500 BRACKET
231. [1] 139006-4400 BLEEDER SCREW
232. [1] 146931-6601 BRACKET
233. [1] 146662-5421 WIRE
234. [1] 139006-4800 BLEEDER SCREW
235. [1] 146931-6100 BRACKET
236. [1] 139006-4700 BLEEDER SCREW
237. [1] 146620-0200 HEX-SOCKET-HEAD CAP SCREW
240. [1] 146688-0120 PULLING ELECTROMAGNET
240/8. [1] 146600-1700 O-RING
242. [1] 407911-1410 CONTROL UNIT
243. [1] 146621-4900 UNION NUT
244. [1] 146933-2620 BRACKET
245. [3] 139512-0500 GASKET
246. [1] 139812-1900 EYE BOLT
247. [1] 146668-1520 PIPE
247. [1] 146668-1520 PIPE
248. [1] 146614-0200 SPACER BUSHING
253. [1] 139006-5700 BLEEDER SCREW
261. [1] 139006-4700 BLEEDER SCREW
275. [1] 146612-7420 BRACKET
276. [2] 010010-2040 BLEEDER SCREW M10P1.5L20
280. [1] 146361-2820 START ADVANCE ASSY
281. [1] 146600-0800 O-RING
294. [1] 146668-1420 INLET UNION
310. [1] 146673-9922 POTENTCIOMETER
310/2. [2] 139104-0400 FLAT-HEAD SCREW
310/3. [1] 146648-2900 JOINT CONNECTION
310/3B. [1] 146648-3000 JOINT CONNECTION
310/3C. [1] 146648-3100 JOINT CONNECTION
310/3D. [1] 146648-3200 JOINT CONNECTION
310/3E. [1] 146648-3300 JOINT CONNECTION
310/3F. [1] 146648-4700 JOINT CONNECTION
310/3G. [1] 146648-5300 JOINT CONNECTION
310/3H. [1] 146649-1700 JOINT CONNECTION
310/4. [1] 146661-0601 BOOT
312. [1] 146933-6000 BRACKET
313. [1] 020106-1240 BLEEDER SCREW M6P1.0L12
318. [1] 146933-4320 BRACKET
344. [1] 146666-7620 INLET UNION
360. [1] 146649-8800 BUSHING
361. [1] 146649-8900 CAP
362. [2] 146620-8402 BLEEDER SCREW
800S. [1] 146018-5020 PUMP HOUSING
800S/1/6. [1] 146601-0700 PACKING RING
804S. [1] 146232-0720 COMPRESSION SPRING
805S. [1] 146574-0120 PARTS SET
810S. [1] 146600-1120 REPAIR SET
821S. [1] 146210-5720 ROLLER SET
835S. [1] 146598-1000 CAP
836S/1. [1] 146598-0600 CAP L18
836S/1. [1] 146598-0700 CAP L21
836S/1. [1] 146598-0800 CAP L24
836S/1. [1] 146598-0900 CAP L27
903. [1] 146672-2820 PULSE GENERATOR
903/2. [1] 146600-1300 O-RING &13W1.9
906. [1] 146970-6700 NAMEPLATE
910S. [1] 146600-4320 PARTS SET
910S. [1] 146600-4320 PARTS SET
911S. [1] 146672-2820 PULSE GENERATOR
911S/2. [1] 146600-1300 O-RING &13W1.9
912S. [1] 026508-1140 GASKET D11.4&8.2T1
913S. [1] 146422-0000 BLEEDER SCREW
914S. [1] 146699-0620 VALVE SET
914S. [1] 146699-0620 VALVE SET
914S. [1] 146699-0620 VALVE SET
915S. [1] 146662-5421 WIRE
916S. [1] 025804-1610 WOODRUFF KEY
917S. [1] 146684-2310 POTENTCIOMETER

Include in #2:

104741-3381 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num
Bosch num
Firm num
Name
104741-3381 
104741-3382 
9 460 611 268 
ME201820  MITSUBISHI
INJECTION-PUMP ASSEMBLY
4M40 TI * K 11CJ VE4 VE




Information:


Illustration 7 g06347860
Injector male spade terminals
There are two options to build injector adapter harness for C3.3.If available, use the injector connector removed from C3.3 harness. Cut both 100 mm wires from the connector and attach bullet terminals that fit in the injector adapter harness C3.8 terminal from injector test kit.If no harness is available, build a harness with the following. Two female spade terminals for injector male spade terminal, two 16 gauge 100 mm wires, and two bullet terminals for injector adapter harness C3.8 terminal.
Illustration 8 g06345429
Injector adapter harness C2.4
Illustration 9 g06346223
Injector adapter harness C3.8
Illustration 10 g06346237
Injector male spade terminals
There are two options to build injector adapter harness for C2.4.If available, use the injector connector removed from C2.4 harness. Cut both 100 mm wires from the connector and attach bullet terminals that fit in the injector adapter harness C3.8 terminal from injector test kit.If no harness is available, build a harness with the following. Two female spade terminals for injector male spade terminal, two 16 gauge 100 mm wires, and two bullet terminals for injector adapter harness C3.8 terminal.Injector Test Set-up
Illustration 11 g06346391
Mounted nozzle test group
Find a suitable stable and surface to either mount or place the nozzle test group. Fill fuel container with #1 diesel and install high-pressure hose assembly. Use adaptors, if needed, based on nozzle tester. Tighten the fuel line adapter to (25 ft lbs). Install the fuel line adapter and tighten to (25 ft lbs) to allow connection to the injector.
Illustration 12 g06346423
Injector holder assembly
Take the injector test kit and remove all parts to assemble, as shown above. Take the injector holder and the clear fuel shield with screws from the kit and remove the screws using a 3mm alan wrench. Assemble the parts so the clear fuel shield with screws is on the bottom. While, the mounted injector holder is on top with the screws removed from before.
Illustration 13 g06346719
Fuel collector and injector holder
Place injector holder onto a fuel collector or another container to capture the injection spray.
Illustration 14 g06346839
Injector setup and harness connection
Install the injector that is needing to be tested into the opening at the top of injector holder. Attach the return fuel drain hose and run the drain hose to another fuel collector. Make the harness connection using the correct adapter for the C2.4, C3.3, and C3.8 engines. Connect the injector pulse tool and the injector adapter harness to the injector.
Illustration 15 g06346868
Complete setup of nozzle tester and injector test kit
Once injector test kit and nozzle test group are set up, connect fuel line adaptor on the high-pressure hose assembly to the injector, leave connection loose. Actuate the lever on the nozzle test group until fuel drips from connection allowing air to purge from setup. Tighten fuel line adaptor at injector to (25 ft lbs).Injector Test Procedure
Illustration 16 g06346881
Mounted nozzle test group (close-up)
Inspect the injector for any leaks. Using the lever on the nozzle tester group, build injection fuel pressure to (5000 psi). Turn the locking valve to insure there is no leakage back through the tester.
Let the nozzle test

Have questions with 104741-3381?





Group cross 104741-3381 ZEXEL

104741-3380  

104741-3381 
9 460 610 882 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

104741-3381  

104741-3382 
9 460 611 268 
ME201820 
INJECTION-PUMP ASSEMBLY
4M40 TI
104741-3382  

104741-3383 
9 460 611 269 
 
INJECTION-PUMP ASSEMBLY
104741-3383  

104741-3384 
9 460 613 281 
 
INJECTION-PUMP ASSEMBLY
104741-3384  

104741-3385 
F 01G 09W 00A 
 
INJECTION-PUMP ASSEMBLY
4M40 TI

Mitsubishi 

104741-3385  
9 460 614 380 
ME202553 
INJECTION-PUMP ASSEMBLY
4M40 TI
Back to top