Buy 101603-0300 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016030300 1156017941


101603-0300 INJECTION-PUMP ASSEMBLY
Rating:
57
Buy INJECTION-PUMP ASSEMBLY 101603-0300 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101603-0300 1016030300
ISUZU 1156017941 1156017941

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below
$119.71

19 May 2024
0.9920[0.45] pounds
IE: TEKNI Industrial USA
Steel Rule 3000x20x1,0 mm INOX, Satin, Grad. inch-mm DIN2768m
VOGEL-GERMANY

Cross reference number

ZEXEL 101603-0300 1016030300
ISUZU 1156017941 1156017941


Zexel num
Bosch num
Firm num
Name
101603-0300 
101603-0306 
 
1156017941  ISUZU
INJECTION-PUMP ASSEMBLY
6BG1-TC *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   132424-0620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.6 3.55 3.65
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   -
Rack position   13.8
Pump speed r/min   850 850 850
Average injection quantity mm3/st.   89.9 88.3 91.5
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   H
Rack position   9.7+-0.5
Pump speed r/min   275 275 275
Average injection quantity mm3/st.   9.4 8.1 10.7
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(13.8)
Pump speed r/min   850 850 850
Average injection quantity mm3/st.   89.9 88.9 90.9
Basic   *
Fixing the lever   *
Boost pressure kPa   20 20
Boost pressure mmHg   150 150
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1-0.45
Pump speed r/min   1450 1450 1450
Average injection quantity mm3/st.   89.2 86 92.4
Fixing the lever   *
Boost pressure kPa   20 20
Boost pressure mmHg   150 150
Injection quantity adjustment_05
Adjusting point   C
Rack position   R1-0.1
Pump speed r/min   550 550 550
Average injection quantity mm3/st.   83.8 80.6 87
Fixing the lever   *
Boost pressure kPa   20 20
Boost pressure mmHg   150 150
Injection quantity adjustment_06
Adjusting point   D
Rack position   12.6
Pump speed r/min   550 550 550
Average injection quantity mm3/st.   54.5 52.9 56.1
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Injection quantity adjustment_07
Adjusting point   I
Rack position   15+-0.5
Pump speed r/min   150 150 150
Average injection quantity mm3/st.   92 92 100
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Boost compensator adjustment
Pump speed r/min   550 550 550
Rack position   12.6
Boost pressure kPa   2 2 4.7
Boost pressure mmHg   15 15 35
Boost compensator adjustment_02
Pump speed r/min   550 550 550
Rack position   13.1
Boost pressure kPa   4.7 4.7 7.4
Boost pressure mmHg   35 35 55
Boost compensator adjustment_03
Pump speed r/min   550 550 550
Rack position   R1-0.1
Remarks
Measure actual boost pressure.
 
Timer adjustment
Pump speed r/min   1325--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   1275
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1400
Advance angle deg.   1 0.5 1.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101603-0300
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)RACK LIMIT (3)Boost compensator stroke: BCL
----------
T1=B04 BCL=(1.1)+-0.1mm
----------

Speed control lever angle

Test data 101603-0300
F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt set position 'H'
----------
aa=35mm
----------
a=43deg+-5deg b=41deg+-3deg

Stop lever angle

Test data 101603-0300
N:Pump normal S:Stop the pump.
----------

----------
a=25deg+-5deg b=40deg+-5deg

Timing setting

Test data 101603-0300
(1)Pump vertical direction (2)Position of timer's threaded hole at the No. 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=13deg
----------
a=(60deg)




Have questions with 101603-0300?





Group cross 101603-0300 ZEXEL

Isuzu 

101603-0300  

101603-0306 
 
1156017941 
INJECTION-PUMP ASSEMBLY
6BG1-TC
 
1156017942 
INJECTION-PUMP ASSEMBLY
6BG1TC
 
1156017943 
INJECTION-PUMP ASSEMBLY
6BG1TC
 
1156017944 
INJECTION-PUMP ASSEMBLY
6BG1TC
 
1156017945 
INJECTION-PUMP ASSEMBLY
6BG1TC
 
1156017948 
INJECTION-PUMP ASSEMBLY
6BG1TC
9 400 614 998 
1156017949 
INJECTION-PUMP ASSEMBLY
6BG1-TC
Back to top