101431-0591 ZEXEL 9 400 610 499 BOSCH INJECTION-PUMP ASSEMBLY 9400610499 1014310591 5156010253

Information injection-pump assembly

BOSCH 9 400 610 499 9400610499

ZEXEL 101431-0591 1014310591

ISUZU 5156010253 5156010253

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101431-0591 zexel genuine, new aftermarket engine parts with delivery

Service parts 101431-0591 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101043-9170

3. GOVERNOR 105410-3351

4. SUPPLY PUMP 105220-7270

5. AUTOM. ADVANCE MECHANIS 105621-0370

6. COUPLING PLATE

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105151-1451

11. Nozzle and Holder

12. Open Pre:MPa(Kqf/cm2) 11.8{120}

13. NOZZLE-HOLDER 105081-3141

14. NOZZLE

105000-1650

15. NOZZLE SET

Include in #1:

101431-0591 as INJECTION-PUMP ASSEMBLY

106671-4395 as _

Cross reference number

Zexel num

Bosch num

Firm num

Name

101431-0591

9 400 610 499

5156010253 ISUZU

INJECTION-PUMP ASSEMBLY
C240 K 14BC INJECTION PUMP ASSY PE4A,5A, PE

Information:

(1) Bore in connecting rod for piston pin bearing ... 55.436 0.013 mm (2.1825 .0005 in) The connecting rod must be heated for installation of piston pin bearing. Do not use a torch.(2) Distance rod may be heated to 175 to 260° C (347 to 500° F) to install the piston pin bearing ... 85.0 mm (3.35 in)(3) Bore in bearing for piston pin (new) ... 50.830 0.008 mm (2.0012 .0003 in.) Diameter of piston pin (new) ... 50.795 0.005 mm (1.9998 .0002 in)Thoroughly lubricate piston pin with clean engine oil prior to inserting into piston group and rod assembly. Maximum permissible clearance between bearing and piston pin (worn) ... 0.25 mm (.010 in)(4) Bearing joint must be assembled at either location on