104205-4081 ZEXEL 9 410 617 229 BOSCH FUEL-INJECTION PUMP 9410617229 1042054081 1669551981


 

Information fuel-injection pump

BOSCH 9 410 617 229 9410617229
ZEXEL 104205-4081 1042054081
KUBOTA 1669551981 1669551981
104205-4081 FUEL-INJECTION PUMP
Rating:
63
Buy FUEL-INJECTION PUMP 104205-4081 zexel genuine, new aftermarket engine parts with delivery

Components :

0. INJECTION-PUMP ASSEMBLY 104205-4081
1. _
2. FUEL INJECTION PUMP
3. NUMBER PLATE
4. _
5. CAPSULE
6. ADJUSTING DEVICE
7. NOZZLE AND HOLDER ASSY
8. Nozzle and Holder
9. Open Pre:MPa(Kqf/cm2) 13.7{140}
10. NOZZLE-HOLDER
11. NOZZLE

Scheme ###:

5. [4] 140154-1420 PLUNGER-AND-BARREL ASSY
12. [4] 140110-4420 DELIVERY-VALVE ASSEMBLY
13. [4] 140112-2800 COMPRESSION SPRING
16. [4] 140115-2200 GASKET D12.8&8.6T0.5
17. [4] 140116-7220 FITTING
20. [4] 140118-0500 O-RING
30. [4] 140131-0021 FLANGE BUSHING
31. [4] 140271-0000 BEARING PIN
32. [8] 140118-0400 O-RING
37. [8] 140124-0100 FLAT-HEAD SCREW
40. [4] 140200-2320 TAPPET
44. [4] 140212-0300 BEARING PIN
45. [1] 140213-1200 LOCKING WASHER
50. [4] 140215-2000 COMPRESSION SPRING
51. [4] 140216-1300 SLOTTED WASHER
52. [4] 140254-2900 SLOTTED WASHER
53/1. [1] 140254-1400 PLATE T1.80
53/1. [1] 140254-1500 PLATE T1.85
53/1. [1] 140254-1600 PLATE T1.90
53/1. [1] 140254-1700 PLATE T1.95
53/1. [1] 140254-1800 PLATE T2.00
53/1. [1] 140254-1900 PLATE T2.05
53/1. [1] 140254-2000 PLATE T2.10
53/1. [1] 140254-2100 PLATE T2.15
53/1. [1] 140254-2200 PLATE T2.20
53/1. [1] 140254-2300 PLATE T2.25
53/1. [1] 140254-2400 PLATE T2.30
53/1. [1] 140254-2500 PLATE T2.35
53/1. [1] 140254-2600 PLATE T2.40
53/1. [1] 140254-2700 PLATE T2.45
53/1. [1] 140254-2800 PLATE T2.50
53/1. [1] 140254-3100 PLATE T1.825
53/1. [1] 140254-3200 PLATE T1.875
53/1. [1] 140254-3300 PLATE T1.925
53/1. [1] 140254-3400 PLATE T1.975
53/1. [1] 140254-3500 PLATE T2.025
53/1. [1] 140254-3600 PLATE T2.075
53/1. [1] 140254-3700 PLATE T2.125
53/1. [1] 140254-3800 PLATE T2.175
53/1. [1] 140254-3900 PLATE T2.225
53/1. [1] 140254-4000 PLATE T2.275
53/1. [1] 140254-4100 PLATE T2.325
53/1. [1] 140254-4200 PLATE T2.375
53/1. [1] 140254-4300 PLATE T2.425
53/1. [1] 140254-4400 PLATE T2.475
53/1. [1] 140254-4500 PLATE T2.525
60. [1] 140243-7020 CONTROL ROD
65. [1] 140262-1300 PLATE
66. [5] 140252-0001 FLAT-HEAD SCREW
77. [4] 140241-4021 CONTROL SLEEVE
93. [1] 140402-3222 EYE BOLT

Include in #2:

104205-4081 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num
Bosch num
Firm num
Name
104205-4081 
9 410 617 229 
NP-PFR4MD50/1NP9 
1669551981  KUBOTA
FUEL-INJECTION PUMP
K 23MD FUEL INJECTION PUMP PFR-4MD PFR




Information:

1. Drain the coolant from the radiator. 2. Remove bolts (1) and grill (2). 3. Remove bolts (5) and fan guard (3). Remove bolts (6) and support bracket (4). Remove the enclosure group top panel (7).4. Remove the bolts holding the enclosure group side panels. Remove the side panels.5. Loosen the hose clamps on the upper and lower radiator hoses. Disconnect the radiator hoses from the radiator. 6. Use tooling (A) and attach a hoist to radiator (8). Remove the lower bolts holding the radiator to the base. Remove radiator (8). The weight of the radiator is 73 kg (161 lb.). The following steps are for the installation of the radiator.7. Use a hoist to install the radiator on the base. Install the bolts. Remove the hoist and tooling (A) from the radiator.8. Connect the upper and lower radiator hoses to the radiator. Tighten the hose clamps.9. Install the enclosure group side panels.10. Install the enclosure group top panel. Install the grill and the fan guard.11. Fill the radiator with coolant to the correct level. See the Maintenance Manual.Remove And Install Radiator And Radiator Guard (Prime)
1. Drain the coolant from the radiator. 2. Loosen hose clamps (4) and (5). Disconnect tube (1) from hose (6). Rotate tube (1) 180° for clearance. Remove bolts (2) from support arms (3). 3. Remove eight bolts (7) holding fan guard (8) to the radiator guard. 4. Install tool (A) and a hoist to the radiator. 5. Remove four bolts (10) that fasten the lower radiator elbow to the radiator. Separate the elbow from the radiator. Remove bolt (11) from the crankcase vent hose clamp.Remove four mounting bolts (9). Remove the radiator and radiator guard. The weight of the radiator and radiator guard is 250 Kg (550 lb.). The following steps are for the installation of the radiator and radiator guard.6. Use a hoist to put the radiator and radiator guard in position on the base. Install four mounting bolts (9). Remove the hoist and tool (A).7. Install the gasket and lower radiator elbow (12) to the radiator. Install bolts (10). Install bolt (11) and the clamp to hold the crankcase vent hose in place.8. Install bolts (7) to hold fan guard (8) in position.9. Connect tube (1) to hose (6) and tighten hose clamps (4) and (5). Install bolts (2) to secure control arms (3) to the radiator guard.10. Fill the radiator with coolant to the correct level. See the Maintenance Manual.Disassemble And Assemble Radiator
Start By:a. remove radiator and radiator guard **The radiator can be disassembled and assembled without removing the radiator and guard. 1. Remove eighteen bolts (2) and remove four plates (4). Remove four bolts, block off plate (1) and the gasket. Remove four bolts, upper radiator hose adapter (3) and the gasket. 2. Loosen four bolts (7). Disconnect tube assemblies (5) and (8). Remove four bolts (9) and remove coolant level switch if applicable. 3. Remove eleven bolts (11) and remove overflow tube (10), crankcase vent tube clamp (13)

Have questions with 104205-4081?





Group cross 104205-4081 ZEXEL

Kubota 

 
1509451012 
FUEL-INJECTION PUMP
 
1509451012 
FUEL-INJECTION PUMP
 
1588151011 
FUEL-INJECTION PUMP
9 410 617 323 
1588151012 
FUEL-INJECTION PUMP
9 410 617 324 
1588151013 
FUEL-INJECTION PUMP

Kubota-Extra 

9 410 617 324 
1588151013 
FUEL-INJECTION PUMP

Kubota 

 
162715101 
FUEL-INJECTION PUMP
 
1627151012 
FUEL-INJECTION PUMP
9 410 617 325 
1627151013 
FUEL-INJECTION PUMP
9 410 617 325 
1627151014 
FUEL-INJECTION PUMP
9 410 617 227 
NP-PFR4MD50/1NP4 
1627151015 
FUEL-INJECTION PUMP
9 410 617 326 
1628251011 
FUEL-INJECTION PUMP
9 410 617 228 
NP-PFR4MD50/NP6 
1628251012 
FUEL-INJECTION PUMP
 
1628551011 
FUEL-INJECTION PUMP
9 410 617 327 
 
FUEL-INJECTION PUMP

Kubota 

9 410 617 056 
1625951011 
FUEL-INJECTION PUMP
9 410 617 328 
1669551101 
FUEL-INJECTION PUMP
104205-4081  
9 410 617 229 
NP-PFR4MD50/1NP9 
1669551981 
FUEL-INJECTION PUMP
9 410 617 077 
1628551012 
FUEL-INJECTION PUMP
9 410 617 230 
NP-PFR4MD50/1NP10 
 
FUEL-INJECTION PUMP
Back to top