Information injector assy

Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
1X Fuel Injector 095000-5332 095000-5333 23910-1302 23670-E0151 23670-E0150 Compatible with Hino N04C Engine Dyna200 truck
ZJSYPXB ⚙️ Part Name ⚙️:Fuel Injector || ⚙️ Part Number ⚙️:095000-5332 095000-5333 23910-1302 23670-E0151 23670-E0150 || ⚙️ Application ⚙️:Compatible with Hino N04C Engine Dyna200 truck || ⚙️ Accurate ⚙️ -Install and use our accessories. Please find the right product according to the old part number and machine model, if you are not sure, please contact us in time, we are more than happy to provide services. || ⚙️ Reliable performance ⚙️ -Carefully designed and tested, with high reliability and stability, can maintain good working condition for a long time.
ZJSYPXB ⚙️ Part Name ⚙️:Fuel Injector || ⚙️ Part Number ⚙️:095000-5332 095000-5333 23910-1302 23670-E0151 23670-E0150 || ⚙️ Application ⚙️:Compatible with Hino N04C Engine Dyna200 truck || ⚙️ Accurate ⚙️ -Install and use our accessories. Please find the right product according to the old part number and machine model, if you are not sure, please contact us in time, we are more than happy to provide services. || ⚙️ Reliable performance ⚙️ -Carefully designed and tested, with high reliability and stability, can maintain good working condition for a long time.
4-Pieces Fuel Injector 095000-5332 095000-5333 23910-1302 23670-E0150 23670-E0151 for Hino N04C Engine Dyna200 truck
ZJSYPXB ⚙️ Part Name ⚙️:Fuel Injector ⚙️ Package Includes ⚙️:4 Pieces Fuel Injector || ⚙️ Part Number ⚙️:095000-5332 095000-5333 23910-1302 23670-E0150 23670-E0151 || ⚙️ Application ⚙️:Compatible with Hino N04C Engine Dyna200 truck || ⚙️ Accurate ⚙️ -Install and use our accessories. Please find the right product according to the old part number and machine model, if you are not sure, please contact us in time, we are more than happy to provide services. || ⚙️ Reliable performance ⚙️ -Carefully designed and tested, with high reliability and stability, can maintain good working condition for a long time.
ZJSYPXB ⚙️ Part Name ⚙️:Fuel Injector ⚙️ Package Includes ⚙️:4 Pieces Fuel Injector || ⚙️ Part Number ⚙️:095000-5332 095000-5333 23910-1302 23670-E0150 23670-E0151 || ⚙️ Application ⚙️:Compatible with Hino N04C Engine Dyna200 truck || ⚙️ Accurate ⚙️ -Install and use our accessories. Please find the right product according to the old part number and machine model, if you are not sure, please contact us in time, we are more than happy to provide services. || ⚙️ Reliable performance ⚙️ -Carefully designed and tested, with high reliability and stability, can maintain good working condition for a long time.
Fuel Injector 095000-5332 095000-5333 23910-1302 23670-E0150 23670-E0151 for Hino N04C Diesel Engine Dyna200 truck
MGHOME Part Number: 095000-5332 095000-5333 23910-1302 23670-E0150 23670-E0151 || Applicable models: Fit for Hino N04C Diesel Engine Dyna200 truck || Safety: 100% Tested Before Shipping to Ensure Product Safety, Stability and Durability. || Function: High-quality material for long-lasting durability. Perfect match for the original car and easy to install || TIPS: Please be sure to compare carefully with photos and check part number before buying items, If you are not sure this part is suitable, please feel free to contact us, we'll reply you as soon as possible.
MGHOME Part Number: 095000-5332 095000-5333 23910-1302 23670-E0150 23670-E0151 || Applicable models: Fit for Hino N04C Diesel Engine Dyna200 truck || Safety: 100% Tested Before Shipping to Ensure Product Safety, Stability and Durability. || Function: High-quality material for long-lasting durability. Perfect match for the original car and easy to install || TIPS: Please be sure to compare carefully with photos and check part number before buying items, If you are not sure this part is suitable, please feel free to contact us, we'll reply you as soon as possible.
Components :
001. | INJECTOR ASSY | 09500-05333 |
001. | INJECTOR ASSY | 09500-05333 |
001. | INJECTOR ASSY | 09500-05333 |
001. | INJECTOR ASSY | 09500-05333 |
001. | INJECTOR ASSY | 09500-05333 |
001. | INJECTOR ASSY | 09500-05333 |
001. | INJECTOR ASSY | 09500-05333 |
001. | INJECTOR ASSY | 09500-05333 |
Scheme ###:
000. | [01] | 09500-05332 | INJECTOR ASSY | 23910-1302 |
000. | [01] | 09500-05332 | INJECTOR ASSY | 23670-E0150 |
000. | [01] | 09500-05333 | INJECTOR ASSY | 23670-E0151 |
000. | [01] | 09500-05332 | INJECTOR ASSY | 23670-78041 |
000. | [01] | 09500-05333 | INJECTOR ASSY | 23670-78042 |
001. | [01] | 09507-40011 | SCREW, HOLLOW OUTL | 22835-1570 |
001. | [01] | 09507-40011 | SCREW, HOLLOW OUTL |
Include in #3:
09500-05333
as INJECTOR ASSY
09500-05333
Cross reference number
Part num | Firm num | Firm | Name |
09500-05333 | 23670-E015 | INJECTOR ASSY |
Information:
Storage Procedure
When a generator is in storage for any length of time, moisture condenses in the windings. Minimize the condensation by use of a dry storage space and space heaters. Refer to step 2 belowIf a brush-type generator (SRCR) is to be in storage for a year or more, lift the brushes off the slip ring to prevent damage to the slip ring by chemical action.After Storage
Test the main stator windings with a megohmmeter in the following situations: 1. Before initial startup of generator set.2. Every 3 months* if generator is operating in a humid environment.3. If generator has not been run under load for 3 months* or more.*This is a guideline only. It may be necessary to megger more frequently if environment is extremely humid, salty or if the last megger test was close to 1 megohm.The megohmmeter test is described in Service Manuals SENR2180 or SENR7968. A reading of 1 meghom or less indicates that the winding has absorbed too much moisture.To Remove Moisture
To remove moisture caused by high humidity, use one of the following methods to make the generator dry:1. Energize space heaters in generator if so equipped.2. Put the generator in an oven at a temperature of not more than 85°C (185°F) for four hours.
If an oven is used for drying, use a forced air type rather than a radiant type. Radiant ovens can cause localized overheating.
3. Space heaters of the same type used in marine applications, can be installed on generators. (See the Parts Book.) These heaters heat the windings to remove moisture and should be connected at all times in high humidity conditions whenever the generator is not running.4. Use a canvas enclosure around the generator and heating lamps to increase the temperature. Make an opening in the top for release of moisture.5. Send a low voltage current through the windings to increase the temperature of the windings. Do not exceed 85°C (185°F).If the megohmmeter test reads under 1 megohm after the drying or if it goes below 1 megohm shortly after drying, contact your Caterpillar dealer. The insulation has deteriorated and should be reconditioned.
When a generator is in storage for any length of time, moisture condenses in the windings. Minimize the condensation by use of a dry storage space and space heaters. Refer to step 2 belowIf a brush-type generator (SRCR) is to be in storage for a year or more, lift the brushes off the slip ring to prevent damage to the slip ring by chemical action.After Storage
Test the main stator windings with a megohmmeter in the following situations: 1. Before initial startup of generator set.2. Every 3 months* if generator is operating in a humid environment.3. If generator has not been run under load for 3 months* or more.*This is a guideline only. It may be necessary to megger more frequently if environment is extremely humid, salty or if the last megger test was close to 1 megohm.The megohmmeter test is described in Service Manuals SENR2180 or SENR7968. A reading of 1 meghom or less indicates that the winding has absorbed too much moisture.To Remove Moisture
To remove moisture caused by high humidity, use one of the following methods to make the generator dry:1. Energize space heaters in generator if so equipped.2. Put the generator in an oven at a temperature of not more than 85°C (185°F) for four hours.
If an oven is used for drying, use a forced air type rather than a radiant type. Radiant ovens can cause localized overheating.
3. Space heaters of the same type used in marine applications, can be installed on generators. (See the Parts Book.) These heaters heat the windings to remove moisture and should be connected at all times in high humidity conditions whenever the generator is not running.4. Use a canvas enclosure around the generator and heating lamps to increase the temperature. Make an opening in the top for release of moisture.5. Send a low voltage current through the windings to increase the temperature of the windings. Do not exceed 85°C (185°F).If the megohmmeter test reads under 1 megohm after the drying or if it goes below 1 megohm shortly after drying, contact your Caterpillar dealer. The insulation has deteriorated and should be reconditioned.