Buy 09500-05283 INJECTOR ASSY Denso Cross


 

Information injector assy

09500-05283 INJECTOR ASSY
Rating:
48
Buy INJECTOR ASSY 09500-05283 genuine, new aftermarket engine parts with delivery

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below
$380.88

27 Dec 2024

CN: GSHLGAO Flagship sto
Compatible with Hino Diesel Engine J08E 268 Truck 1pcs Fuel Injector 23670-E0291 23670E0291 095000-5280 095000-5283
GSHLGAO Part Name: Fuel Injector || Part Numbers: 23670-E0291 23670E0291 095000-5280 || Engine Model: J08E is a fuel-efficient, durable, high-performance engine that meets emission standards. With advanced technology and engineering, it offers optimal horsepower and torque for various vehicles. Its compact size and lightweight design make it popular for trucks, buses, and construction equipment. Known for smooth operation and low maintenance, the J08E engine is a cost-effective, long-lasting choice for businesses and individuals. || This product is designed to be compatible with the Hino Diesel Engine J08E 268 Truck. It has been specifically engineered to work seamlessly with this particular engine model, ensuring optimal performance and reliability. With its compatibility, users can trust that this product will operate efficiently and effectively in conjunction with the Hino Diesel Engine J08E 268 Truck. || Please feel free to provide a list of part numbers that require confirmation before proceeding with your order. Alternatively, you can reach out to our customer service team to specify the necessary part number or engine model to prevent any potential returns. Your cooperation is greatly appreciated. Thank you.
$2,309.79

10 Oct 2024

CN: QYWD
6X Fuel Injector Model 095000-5283 0950005283 for Hino J08E Engine 268 Truck
TUWODE Part Number: 095000-5283 950005283 || Item Type: Fuel Injector || Applicable Models: Fit for Hino J08E Engine 268 Truck || Well-functioning fuel injectors ensure the correct air-fuel ratio, which is essential for minimizing harmful emissions. || Fuel is broken into fine droplets for optimal air mixing and enhanced combustion efficiency.
$700.20

10 Oct 2024

CN: QINGCANG Constructio
Qiape 4X Fuel Injector for Hino J08E 7.7L Ranger ND NJ NE NV Engine 500 Series 268 Diesel Heavy Truck 095000-5283 0950005283
Qiape Part Name:Fuel Injector 095000-5283 0950005283 || Part Number:095000-5283 0950005283 || APPlication: Compatible with Hino J08E 7.7L Ranger ND NJ NE NV Engine 500 Series 268 Diesel Heavy Truck || Please tell us of your engine model or a view of nameplate when order this item to lower the error rate Thanks || There are no instructions included in this kit it is recommended to install professionally

Include in #3:

Number on scheme 000
INJECTOR ASSY
09500-05284 as INJECTOR ASSY

Cross reference number



Part num Firm num Firm Name
09500-05283  23670-E029  INJECTOR ASSY




Information:

(1) End play for shaft (new) ... 0.114 0.038 mm(.0045 .0015 in) Maximum permissible end play (worn) ... 0.20 mm (.008 in)(2) Thickness of thrust bearing (where thrust rings contact bearing) ... 5.36 0.03 mm (.211 .001 in)(3) Tighten both band clamps with procedure that follows: a. Tighten to ... 14 1.1 N m (125 10 lb in)b. Tap (hit) clamp lightly all around.c. Tighten again to ... 14 1.1 N m (125 10 lb in)
Do not overtighten the clamps.
(4) Diameter of shaft (new) ... 15.997 to 16.005 mm (.6298 to .6301 in) Bore in the bearing (new) ... 16.035 to 16.043 mm (.6313 to .6316 in)Maximum permissible clearance between bearing and shaft (worn) ... 0.05 mm (.002 in)(5) Maximum permissible gap of oil seal ring, measured in bore of housing ... 0.25 mm (.010 in)(6) Install the compressor wheel (at room temperature) as follows: a. See Compressor Wheel Clearance for the correct shim thickness to use.b. Put compressor wheel on the shaft.c. Put a small amount of clean engine oil on the threads.d. Tighten the nut to 14 to 17 N m (125 to 150 lb in).
Do not bend or add stress to the shaft when nut is loosened or tightened.
e. Remove nut from shaft and apply 6V1541 Quick Cure Primer on the threads of the shaft and nut followed by application of 9S3265 Retaining Compound.f. Tighten nut to 4 N m (30 lb in).g. Tighten nut more as follows: For 99.0 mm (3.90 in) diameter compressor wheels, tighten the nut an additional 90°.For 86.4 mm (3.40 in) diameter compressor wheels, tighten the nut an additional 60°.(7) Shims. See Compressor Wheel Clearance for the correct shim thickness to use.(8) Thickness of each thrust ring ... 2.553 0.013 mm (.1005 .0005 in)(9) Bore in housing (new) ... 24.994 to 25.006 mm (.9840 to .9845 in) Outside diameter of the bearing (new) ... 24.882 to 24.892 mm (.9796 to .9800 in)Maximum permissible clearance between bearing and bore in housing (worn) ... 0.15 mm (.006 in)Torque for four nuts (put 5P3931 Anti-Seize Compound on threads) and bolts that hold the turbocharger to the exhaust manifold ... 55 5 N m (40 4 lb ft) Put clean engine oil in the oil inlet of the turbocharger after assembly or before installation to provide start up lubrication and/or storage protection.Compressor Wheel Clearance
a. Remove the compressor wheel from the cartridge group and place the wheel in the compressor housing. Center the wheel in the housing.b. Measure the distance from the compressor housing mounting face to the compressor wheel seating face. Measure four places at approximately 90° increments. This is dimension "A" (Fig. 1).c. Assemble the cartridge group complete except for the compressor wheel and shims. Hold the turbine wheel-shaft assembly toward the compressor end against the thrust bearing. Measure the distance from

Have questions with 09500-05283?





Group cross 09500-05283

Back to top