Information injector assy

Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Fuel Injector For Hino 500 J08E Engine 0950005270 23670E0250 0950005274 (Pack of 6) XYo 095000-5270 23670-E0250 095000-5274
GSHLGAO Part Name:Fuel Injector || Part Number:095000-5270 23670-E0250 095000-5274 || This application is tailored for the Hino 500 with a J08E engine to optimize performance and fuel efficiency, ensuring durability, longevity, and smooth operation. It is a reliable solution that guarantees to meet engine requirements, making it a valuable investment for owners and operators. || This notice serves as a reminder that the application information presented is intended for reference purposes only. Prior to making a purchase, it is essential to verify the part number and conduct a thorough comparison with existing components. Should you have any queries or require further clarification, do not hesitate to reach out to us. || Top Choice- This product boasts excellent performance, dependable reliability, effortless installation, and swift response times.
GSHLGAO Part Name:Fuel Injector || Part Number:095000-5270 23670-E0250 095000-5274 || This application is tailored for the Hino 500 with a J08E engine to optimize performance and fuel efficiency, ensuring durability, longevity, and smooth operation. It is a reliable solution that guarantees to meet engine requirements, making it a valuable investment for owners and operators. || This notice serves as a reminder that the application information presented is intended for reference purposes only. Prior to making a purchase, it is essential to verify the part number and conduct a thorough comparison with existing components. Should you have any queries or require further clarification, do not hesitate to reach out to us. || Top Choice- This product boasts excellent performance, dependable reliability, effortless installation, and swift response times.
Fuel Injector 095000-5270 095000-5271 095000-5274 for Hino 500 J08E Engine
MGHOME Part Number: 095000-5270 095000-5271 095000-5274 || Applicable models: Fit for Hino 500 J08E Engine || Safety: 100% Tested Before Shipping to Ensure Product Safety, Stability and Durability. || Function: High-quality material for long-lasting durability. Perfect match for the original car and easy to install || TIPS: Please be sure to compare carefully with photos and check part number before buying items, If you are not sure this part is suitable, please feel free to contact us, we'll reply you as soon as possible.
MGHOME Part Number: 095000-5270 095000-5271 095000-5274 || Applicable models: Fit for Hino 500 J08E Engine || Safety: 100% Tested Before Shipping to Ensure Product Safety, Stability and Durability. || Function: High-quality material for long-lasting durability. Perfect match for the original car and easy to install || TIPS: Please be sure to compare carefully with photos and check part number before buying items, If you are not sure this part is suitable, please feel free to contact us, we'll reply you as soon as possible.
You can express buy:
USD 19.99
06-06-2019
06-06-2019
ERIKC 10# diesel fuel pump injection valve for machine control injecteurs 095000-5270, 095000 5270 and 095000 5270
Images:
USD 19.99
[24-May-2019]
USD 19.99
[31-May-2019]
USD 19.99
[22-May-2019]
USD 19.99
[22-May-2019]
Components :
001. | INJECTOR ASSY | 09500-05270 |
001. | INJECTOR ASSY | 09500-05270 |
001. | INJECTOR ASSY | 09500-05270 |
001. | INJECTOR ASSY | 09500-05270 |
Scheme ###:
000. | [01] | 09500-05273 | INJECTOR ASSY | |
000. | [01] | 09500-05274 | INJECTOR ASSY | |
001. | [01] | 09507-40012 | SCREW, HOLLOW OUTL |
Cross reference number
Part num | Firm num | Firm | Name |
09500-05270 | INJECTOR ASSY | ||
23910-33450-71 | TICO | INJECTOR ASSY | |
23670-E0251 | HINO | INJECTOR ASSY | |
23670-E0250 | HINO | INJECTOR ASSY | |
16650Z504B | UD TRUCKS | INJECTOR ASSY | |
16650Z500E | UD TRUCKS | INJECTOR ASSY | |
16650Z5003 | UD TRUCKS | INJECTOR ASSY |
Information:
2. Turn the crankshaft until two pistons are at bottom center.3. Remove bolts (1) and the bearing caps. Push the rods and pistons up until the rings are out of the cylinder liners. 4. Remove pistons (2) and connecting rods from the cylinder liners.5. Do Steps 1 through 4 for the remainder of the pistons and connecting rods.Install Pistons & Connecting Rod Assemblies
1. Put clean engine oil on piston rings, connecting rod bearings and cylinder liners. 2. Use Tool (A), and install piston (2) and the connecting rod in the cylinder liner.3. Install the bearing cap on the connecting rod with the number on the side of the bearing cap on the same side and same number as on the connecting rod.4. Put 2P2506 Thread Lubricant on the threads of the bolts. Install the nuts, and tighten them to a torque of 90 8 N m (67 6 lb ft). Put a mark on the nuts and cap, and tighten the nuts an extra 90 5 degrees.5. Do Steps 1 through 4 for the remainder of the pistons and connecting rods.End By:a. install piston cooling tubesb. install oil pumpc. install cylinder head assemblyDisassemble & Assemble Pistons & Connecting Rod Assemblies
Start By:a. remove pistons and connecting rod assemblies 1. Remove bearings (3) from the connecting rod and connecting rod cap.2. Remove retainer ring (1) with Tool (A).3. Remove pin (2) and connecting rod (4) from the piston. 4. Remove piston rings (5) from the piston with Tool (B). Clean the piston ring grooves on the pistons with an acceptable ring groove cleaning tool. See, Use Of Piston Bearing Removal And Installation Tools, Special Instructions, SMHS7295.5. Heat connecting rod (4) in an oven to a temperature of 177° to 260°C (350° to 500° F). Never use a direct flame to heat a connecting rod. 6. Put connecting rod (4) in position on the base plate of Tool (C). Put a new rod pin bearing (6) on the adapter part of Tool (C). The old bearing is pushed out by Tool (C) as the new bearing is installed.7. Use Tool (C) to push the new bearing into the connecting rod until the push adapter of Tool (C) makes full contact with the connecting rod surface.8. Use a pin boring machine to make the rod pin bearing the correct size. The bore in the new rod pin bearing must be 50.830 0.008 mm (2.0012 .0003 in).9. Check the clearance between the ends of the piston rings. See the topic, "Pistons & Rings" in Specifications Manual, SENR6470.10. Install the oil ring spring in the oil ring groove of the piston. The oil ring is to be installed over the spring with the oil ring end gap 180° from the oil ring spring joint.11. Install the oil ring on the piston with tool (B).12. Install the second (intermediate) piston ring with the side that has the identification "UP-2" toward the top of the piston. Use Tool (B) to install
1. Put clean engine oil on piston rings, connecting rod bearings and cylinder liners. 2. Use Tool (A), and install piston (2) and the connecting rod in the cylinder liner.3. Install the bearing cap on the connecting rod with the number on the side of the bearing cap on the same side and same number as on the connecting rod.4. Put 2P2506 Thread Lubricant on the threads of the bolts. Install the nuts, and tighten them to a torque of 90 8 N m (67 6 lb ft). Put a mark on the nuts and cap, and tighten the nuts an extra 90 5 degrees.5. Do Steps 1 through 4 for the remainder of the pistons and connecting rods.End By:a. install piston cooling tubesb. install oil pumpc. install cylinder head assemblyDisassemble & Assemble Pistons & Connecting Rod Assemblies
Start By:a. remove pistons and connecting rod assemblies 1. Remove bearings (3) from the connecting rod and connecting rod cap.2. Remove retainer ring (1) with Tool (A).3. Remove pin (2) and connecting rod (4) from the piston. 4. Remove piston rings (5) from the piston with Tool (B). Clean the piston ring grooves on the pistons with an acceptable ring groove cleaning tool. See, Use Of Piston Bearing Removal And Installation Tools, Special Instructions, SMHS7295.5. Heat connecting rod (4) in an oven to a temperature of 177° to 260°C (350° to 500° F). Never use a direct flame to heat a connecting rod. 6. Put connecting rod (4) in position on the base plate of Tool (C). Put a new rod pin bearing (6) on the adapter part of Tool (C). The old bearing is pushed out by Tool (C) as the new bearing is installed.7. Use Tool (C) to push the new bearing into the connecting rod until the push adapter of Tool (C) makes full contact with the connecting rod surface.8. Use a pin boring machine to make the rod pin bearing the correct size. The bore in the new rod pin bearing must be 50.830 0.008 mm (2.0012 .0003 in).9. Check the clearance between the ends of the piston rings. See the topic, "Pistons & Rings" in Specifications Manual, SENR6470.10. Install the oil ring spring in the oil ring groove of the piston. The oil ring is to be installed over the spring with the oil ring end gap 180° from the oil ring spring joint.11. Install the oil ring on the piston with tool (B).12. Install the second (intermediate) piston ring with the side that has the identification "UP-2" toward the top of the piston. Use Tool (B) to install