Buy 09500-01181 INJECTOR ASSY Denso Cross


 

Information injector assy

09500-01181 INJECTOR ASSY
Rating:
49
Buy INJECTOR ASSY 09500-01181 genuine, new aftermarket engine parts with delivery

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below
$572.28

13 Feb 2025

VN: Laminee
Genuine Engine Common Rail Fuel Injectors 095000-1181 095000-0721 095000-0722 For 6M60T
Generic

You can express buy:

USD 288
10-11-2022
USD 338
22-10-2018
common rail fuel injector 9709500-118 095000-1181 095000-0721 095000-0722 for 6M60T

Components :

001. INJECTOR ASSY 09500-01181

Scheme ###:

000. [01] 09500-01181 INJECTOR ASSY ME300331
015. [01] 09003-40150 PLUG MM501732
016. [02] 94901-17590 WASHER, STEEL PLAT
017. [02] 94905-03370 NUT, HEXAGON
018. [01] 09001-40160 CAP, VALVE HOLDER
020. [01] 09508-70020 GUIDE, HARNESS
021. [01] 09508-90040 COVER, INJECTOR
022. [01] 09529-40170 HARNESS, INJECTOR

Include in #3:

09500-01181 as INJECTOR ASSY

Cross reference number



Part num Firm num Firm Name
09500-01181  ME300331  INJECTOR ASSY




Information:


Do not let the tops of the fuel nozzles turn when the fuel lines are loosened. The nozzles will be damaged if the top of the nozzles turns in the body.
1. Loosen the fuel injection line nut at the nozzle end with tool (A) and a 5P328 crowfoot wrench (7/8").2. Loosen the fuel line nut at the fuel injection line adapter with tool (B). Remove inner fuel injection lines (1). Install caps and plugs on all fuel line openings to keep dirt out of the fuel system. If necessary, use tooling (D) to turn the engine so the valves do not make contact with the pistons when the valves are opened with tool (C) to remove the push rods.3. Put compression on the valve springs with tool (C), and remove push rods (2). Put identification marks on the push rods as to their location in the engine.4. Push the push rod end of the rocker arms down. 5. Remove the intake valve lifter with tooling (E) as follows:a. Install 5P2685 Nut (3) and 5P6601 Collet (4) on 5P2408 Outer Handle Assembly (5).b. Install 5P6599 Inner Handle Assembly (6) in 5P2408 Outer Handle Assembly (5). c. Install tooling (E) in the intake valve lifter. Hold the 5P2408 Outer Handle Assembly, and tighten the 5P6599 Inner Handle Assembly until the 5P6601 Collet is tight against the inside of the intake valve lifter. d. Remove intake valve lifters (7) from the cylinder block with tooling (E). Put identification marks on the lifters as to their location in the engine. 6. Remove the exhaust valve lifters with tooling (E) as follows:a. Install 5P2685 Nut (3) and 5P6601 Collet (4) on 5P2408 Outer Handle Assembly (5). The opening in the cylinder head assembly for the intake valve lifter is larger than the opening in the exhaust valve lifter side. The tooling and each valve lifter must be installed and removed from the intake valve lifter side.b. Install the outer handle assembly in the intake valve lifter side of the cylinder head assembly. Slide the flat area of 5P2408 Outer Handle Assembly (5) through the head casting, and install the 5P6601 Collet in the exhaust valve lifters. c. Install 5P6599 Inner Handle Assembly (6) in 5P2408 Outer Handle Assembly (5). Hold the 5P2408 Handle Assembly, and tighten the 5P6599 Handle Assembly until the 5P6601 Collet is tight against the inside of the exhaust valve lifter.d. Pull the exhaust valve lifter up until the spring on the exhaust valve lifter is free from the cylinder block.e. Remove the 5P6599 Inner Handle Assembly. Slide the 5P2408 Outer Handle Assembly through the head casting, and remove it from the intake valve lifter side of the cylinder head. f. Use a magnet, and remove exhaust valve lifters (8) from the intake valve lifter side of the cylinder head assembly. Put identification marks on the lifters as to their location in the engine.7. Remove the guide springs from the lifters.Install Valve Lifters
Steps 1 and 2 must be done to

Have questions with 09500-01181?





Group cross 09500-01181

Back to top