Information injector assy
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
0950000285 095000-0285 4X Fuel Injector for Hino Engine
TUWODE Part Number: 950000285 095000-0285 || Item Type: Fuel Injector || Applicable Models: Fit for Hino Engine || Well-functioning fuel injectors ensure the correct air-fuel ratio, which is essential for minimizing harmful emissions. || Fuel is broken into fine droplets for optimal air mixing and enhanced combustion efficiency.
TUWODE Part Number: 950000285 095000-0285 || Item Type: Fuel Injector || Applicable Models: Fit for Hino Engine || Well-functioning fuel injectors ensure the correct air-fuel ratio, which is essential for minimizing harmful emissions. || Fuel is broken into fine droplets for optimal air mixing and enhanced combustion efficiency.
1X Fuel Injector Model 095000-0285 0950000285 for Hino Engine
TUWODE Part Number: 095000-0285 950000285 || Item Type: Fuel Injector || Applicable Models: Fit for Hino Engine || Well-functioning fuel injectors ensure the correct air-fuel ratio, which is essential for minimizing harmful emissions. || Fuel is broken into fine droplets for optimal air mixing and enhanced combustion efficiency.
TUWODE Part Number: 095000-0285 950000285 || Item Type: Fuel Injector || Applicable Models: Fit for Hino Engine || Well-functioning fuel injectors ensure the correct air-fuel ratio, which is essential for minimizing harmful emissions. || Fuel is broken into fine droplets for optimal air mixing and enhanced combustion efficiency.
$522.42
28 Mar 2023
0.0022[0.00] Pounds
CN: Paris Left Bank Shop
Oil Injection Nozzle Remanufacture 095000-0285 095000-0284 Common Rail Diesel Injector Fit for Diesel Engine Replace Parts
CITFUN Good atomization effect, accurate spraying, fuel saving and environmental protection || It is easy to install and directly replace the original product that does not work. || It is made of high-quality materials, not easy to block, and is very durable. || Similar to the specifications of the original manufacturer, matching with the original vehicle, and passing the product quality test before shipment. || Better engine performance, more stable power acceleration, and conducive to complete combustion.
CITFUN Good atomization effect, accurate spraying, fuel saving and environmental protection || It is easy to install and directly replace the original product that does not work. || It is made of high-quality materials, not easy to block, and is very durable. || Similar to the specifications of the original manufacturer, matching with the original vehicle, and passing the product quality test before shipment. || Better engine performance, more stable power acceleration, and conducive to complete combustion.
Components :
| 001. | INJECTOR ASSY | 09500-00285 |
| 001. | INJECTOR ASSY | 09500-00285 |
| 001. | INJECTOR ASSY | 09500-00285 |
Scheme ###:
| 000. | [01] | 09500-00284 | INJECTOR ASSY | 23910-1135 |
| 000. | [01] | 09500-00285 | INJECTOR ASSY | 23910-1136 |
| 000. | [01] | 09500-00285 | INJECTOR ASSY | S2391-01136 |
Include in #3:
09500-00285
as INJECTOR ASSY
09500-00285
Cross reference number
| Part num | Firm num | Firm | Name |
| 09500-00285 | 23910-1136 | INJECTOR ASSY |
Information:
(1) Diameter of the valve seat insert ... 54.610 0.013 mm (2.1500 .0005 in) Bore in head for valve seat insert ... 54.534 0.013 mm (2.1470 .0005 in)(2) Depth of bore in head for valve seat insert ... 11.23 0.05 mm (.442 .002 in)(3) Maximum permissible width of the face of the valve seat insert ... 3.05 mm (.120 in)(4) Distance from head of valve to cylinder head face: Maximum permissible (valve closed) ... 1.73 mm (.068 in)Minimum permissible (valve closed) ... 0.91 mm (.036 in)(5) Angle of the face of the valve seat insert ... 30 1/2 1/2°(6) Outside diameter of the face of the valve seat insert ... 52.23 0.13 mm (2.045 .005 in) Maximum permissible ... 52.45 mm (2.065 in)(7) Angle to grind face of seat insert (to get a reduction of maximum seat diameter) ... 15°Intake Valve (without valve seat insert)
(1) Distance from head of valve to cylinder head face: Maximum permissible (valve closed) ... 1.73 mm (.068 in)Minimum permissible (valve closed) ... 0.91 mm (.036 in)(2) Maximum permissible width of the face of the valve seat ... 3.05 mm (.120 in)(3) Outside diameter of the valve seat ... 52.23 0.13 mm (2.045 .005 in) Maximum permissible ... 52.45 mm (2.065 in)(4) Angle of the face of the valve seat ... 30 1/2 1/2°(5) Diameter of the bore ... 54.61 mm (2.150 in)(6) Maximum permissible depth of the bore to make the face of the valve seat smaller ... 4.32 mm (.170 in)Exhaust Valve
(1) Depth of bore in head for valve seat insert ... 11.23 0.13 mm (.442 .005 in)(2) Diameter of valve seat insert ... 48.565 0.013 mm (1.9120 .0005 in) Bore in head for valve seat insert ... 48.489 0.013 mm (1.9090 .0005 in)(3) Maximum permissible width of the face of the valve seat insert ... 2.67 mm (.105 in)(4) Distance from head of valve to cylinder head face: Maximum permissible (valve closed) ... 2.16 mm (.085 in)Minimum permissible (valve closed) ... 1.27 mm (.050 in)(5) Angle of the face of the valve seat insert ... 45 1/2 1/2°(6) Outside diameter of the face of the valve seat insert ... 44.07 0.13 mm (1.735 .005 in) Maximum permissible ... 44.70 mm (1.760 in)(7) Angle to grind face of seat insert (to get a reduction of maximum seat diameter) ... 15°
(1) Distance from head of valve to cylinder head face: Maximum permissible (valve closed) ... 1.73 mm (.068 in)Minimum permissible (valve closed) ... 0.91 mm (.036 in)(2) Maximum permissible width of the face of the valve seat ... 3.05 mm (.120 in)(3) Outside diameter of the valve seat ... 52.23 0.13 mm (2.045 .005 in) Maximum permissible ... 52.45 mm (2.065 in)(4) Angle of the face of the valve seat ... 30 1/2 1/2°(5) Diameter of the bore ... 54.61 mm (2.150 in)(6) Maximum permissible depth of the bore to make the face of the valve seat smaller ... 4.32 mm (.170 in)Exhaust Valve
(1) Depth of bore in head for valve seat insert ... 11.23 0.13 mm (.442 .005 in)(2) Diameter of valve seat insert ... 48.565 0.013 mm (1.9120 .0005 in) Bore in head for valve seat insert ... 48.489 0.013 mm (1.9090 .0005 in)(3) Maximum permissible width of the face of the valve seat insert ... 2.67 mm (.105 in)(4) Distance from head of valve to cylinder head face: Maximum permissible (valve closed) ... 2.16 mm (.085 in)Minimum permissible (valve closed) ... 1.27 mm (.050 in)(5) Angle of the face of the valve seat insert ... 45 1/2 1/2°(6) Outside diameter of the face of the valve seat insert ... 44.07 0.13 mm (1.735 .005 in) Maximum permissible ... 44.70 mm (1.760 in)(7) Angle to grind face of seat insert (to get a reduction of maximum seat diameter) ... 15°