Buy 09500-00234 INJECTOR ASSY Denso Cross


 

Information injector assy

09500-00234 INJECTOR ASSY
Rating:
60
Buy INJECTOR ASSY 09500-00234 genuine, new aftermarket engine parts with delivery

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below
$817.00
 

18 Aug 2019

GOWEGROUP: GOWEGROUP
GOWE fuel injector 095000-0234
fuel injector 095000-0234

Components :

001. INJECTOR ASSY 09500-00234
001. INJECTOR ASSY 09500-00234

Scheme ###:

000. [01] 09500-00234 INJECTOR ASSY 23910-1051
000. [01] 09500-00234 INJECTOR ASSY S2391-01051
015. [01] 09003-40150 PLUG
016. [02] 94901-17590 WASHER, STEEL PLAT
017. [02] 94905-03370 NUT, HEXAGON
018. [01] 09506-00020 CONNECTOR SUB-ASSY
019. [01] 09506-20010 GASKET, INLET CONN
020. [01] 09001-40160 CAP, VALVE HOLDER
021. [01] 09507-10041 CONNECTOR, FUEL OU
022. [01] 09316-60100 SCREW, HOLLOW 22835-1510A
023. [01] 09507-20020 GASKET, OUTLET CON
024. [01] 09507-30020 WASHER, OUTLET
026. [01] 09529-40081 HARNESS, INJECTOR
027. [01] 09508-70020 GUIDE, HARNESS

Include in #3:

09500-00234 as INJECTOR ASSY
09500-00234

Cross reference number



Part num Firm num Firm Name
09500-00234  23910-1051  INJECTOR ASSY




Information:


Prime the oil pump with SAE 30 engine oil before installation.
1. Position the oil pump on the engine, and install the pump mounting bolts and screen mounting bolt.concluding step: a) install oil panDisassemble Oil Pump
preparatory step: a) remove oil pump 1. Remove the oil pump idler gear (1). Using tool setup (A), remove the bearing from the gear.2. Remove the suction bell assembly (2) and relief valve oil tube (3). 3. Remove the relief valve (4) and spring (5).4. Using tool setup (B), pull the oil pump drive gear from the shaft. Remove the woodruff key. 5. Remove the oil pump housing cover (6).6. Remove the pump gears. 7. Using tool setup (C), remove the bearings from the pump housing and gear.8. Remove the bearing from the pump housing cover.Assemble Oil Pump
1. Using tool setup (A), install the bearing in the oil pump idler gear. Recess the bearing edge flush with the inner edge of the chamfer. 2. Using tool setup (B), install the bearings in the pump housing, pump gear and pump housing cover. Recess the bearing edge flush with the inner edge of the chamfer. 3. Lubricate the bearings, gears (1) and shaft with clean SAE 30 engine oil. Install the gears into the pump housing.4. Install the oil pump housing cover (2).5. Heat the oil pump drive gear to 350°F (177°C). Install the woodruff key and gear on the pump shaft.6. Install the relief valve and spring.7. Install the suction bell assembly, relief valve oil tube and install idler gear.concluding step: a) install oil pump

Have questions with 09500-00234?





Group cross 09500-00234

Back to top