Buy 09500-00222 INJECTOR ASSY Denso Cross


 

Information injector assy

09500-00222 INJECTOR ASSY
Rating:
59
Buy INJECTOR ASSY 09500-00222 genuine, new aftermarket engine parts with delivery

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below
$2,084.00

29 Jan 2025

CN: GEMMOE
6Pcs New Fuel Injector 095000-0222 095000-022 1-15300437-3 Fits for Isuzu 6SD1 Engine
Thcbme Item name: Fuel Injector || Part Number:095000-0222 095000-022 1-15300437-3 || Application: for Isuzu 6SD1 Engine || Ideal replacement: Precision engineered to match specific vehicles. || Ensure fit: To make sure this part fits your exact vehicle.
$635.42

12 Feb 2025

VN: Laminee
Fuel Injector 095000-0222 095000-0220 095000-022# 1-15300347-3 1153003473 1-15300347-0 1153003470 095000-0221 For ISUZU 6SD1
Generic
$470.55

12 Feb 2025

VN: Laminee
Common Rail Fuel injector 095000-0220 095000-0221 095000-0222 1-15300347-3 1-15300347-0 1-15300347-1
Generic

You can express buy:

USD 516
26-10-2022
Engine Fuel Injector 095000-0222 FOR 6SD1 1-15300347-3 1153003473
USD 420
11-10-2022
Machinery Engine Parts Common Fuel Injector 095000-0222 0950000222
USD 480
07-10-2022
Hot-Selling Common Rail Fuel Injector 095000-0222 0950000222 1-15300347-3
Images:
USD 280
[10-Nov-2022]
USD 255
100% original and New 095000-0222 , 095000-0220 , 095000-022# ,1-15300347-3 ,1153003473 ,1-15300347-0 ,1153003470 , 095000-0221
[09-Apr-2018]

Components :

001. INJECTOR ASSY 09500-00222

Scheme ###:

000. [01] 09500-00222 INJECTOR ASSY 1-15300347-3

Include in #3:

09500-00222 as INJECTOR ASSY

Cross reference number



Part num Firm num Firm Name
09500-00222  1-15300347  INJECTOR ASSY




Information:

preparatory step: a) separate governor from fuel injection pump housing. 1. Remove the fuel injection pump as follows: a) Remove the protective cap and the felt washer (1). b) Install wrench (A) and remove retaining bushing (2) from housing.c) Remove the seal (3). d) Install extractor (B).e) Lift the fuel injection pump out of the housing.f) Remove the spacer (4). Keep the spacers (4) and pumps together, and identified as to their location in the fuel injection pump housing.2. Disassemble the fuel injection pumps as follows: a) Remove the bonnet (5), ring (6), spring (7), and check valve (8) from the barrel (9).b) Remove the plunger assembly (10), washer (11), and spring (12) from the barrel (9).
While disassembling and assembling fuel injection pump, exercise considerable care to prevent damage to plunger surfaces. The barrel and plunger assemblies are matched, and the individual parts are not interchangeable with other barrels or plunger assemblies.
3. Remove the rack (13).4. Remove the lifters (14). Keep the lifters identified and together with their respective pumps and spacers. 5. Remove the camshaft retaining plate (15), bolt and lock. 6. Remove the spring (16) and the gear assembly (17) from the camshaft. 7. Remove the camshaft (19). 8. Using tool (C), remove the camshaft bearings from the fuel injection pump housing.9. Remove the two rack bearings (18) from the fuel injection pump housing.Assemble Fuel Injection Pump Housing
1. Using tool group (C), install the camshaft bearings in the fuel injection pump housing. Install the bearing in governor end of housing so the oil hole in bearing is aligned with oil hole in housing. Install the camshaft bearings flush with outer ends of fuel injection pump housing. 2. Using tool (D), install the two rack bearings in the fuel injection pump housing. Install the bearing in governor end of housing so it will be recessed .195 .005 in. (4,953 0,127 mm) from face of housing. Install the rack bearing in accessory drive end of housing so it will be flush with face of fuel injection pump housing. 3. Lubricate the camshaft with clean SAE 30 engine oil. Install the camshaft in fuel injection pump housing. 4. Postion the governor drive gear (1) and spring (2) on the camshaft. Install the camshaft retaining plate (3), bolt, and lock. 5. Install the lifters (4) in their respective positions in housing. Lubricate the rack generously with clean SAE 30 engine oil. Install the rack (5) into fuel injection pump housing with the slot in rack toward the governor end of housing.6. Install the spacers in their respective positions in housing. If new lifters and pumps are to be installed, it will be necessary to set the fuel pump timing dimension. See FUEL INJECTION PUMP TIMING DIMENSION SETTING-OFF ENGINE in TESTING AND ADJUSTING.7. Assemble the fuel injection pumps as follows: a) Lubricate all parts generously with clean fuel oil.b) Install the spring, washer, and plunger in the barrel.c) Install the spring, check valve, bonnet, and ring on the barrel.
Do

Have questions with 09500-00222?





Group cross 09500-00222

Back to top