09340-00950 NOZZLE ASSY Denso Cross


 

Information nozzle assy

BOSCH 0434250001
CAV 5641015
Nozzle Type: ND-DN0SD21
DAIHATSU DELTA DG
ISHIKAWAJIMA INDUSTRIAL Y316,Y317
ISHIKAWAJIMA TRACTOR LEK752C
09340-00950 NOZZLE ASSY
Rating:
11
Buy NOZZLE ASSY 09340-00950 genuine, new aftermarket engine parts with delivery

Include in #3:

Number on scheme 002
NOZZLE ASSY
09350-02010 as NOZZLE ASSY

Cross reference number



Part num Firm num Firm Name
09340-00950  23620-8730  NOZZLE ASSY
2362A-87302    HINO NOZZLE ASSY
23620-87302-000    DAIHATSU NOZZLE ASSY
131416080    ISHIKAWAJIMA NOZZLE ASSY




Information:

2. Turn the crankshaft until two pistons are at bottom center.3. Remove bolts (1) and the bearing caps. Push the rods and pistons up until the rings are out of the cylinder liners. 4. Remove pistons (2) and connecting rods from the cylinder liners.5. Do Steps 1 through 4 for the remainder of the pistons and connecting rods.Install Pistons And Connecting Rod Assemblies
1. Put clean engine oil on piston rings, connecting rod bearings and cylinder liners. 2. Use tool (A), and install piston (2) and the connecting rod in the cylinder liner. Be sure the number on the tab groove side of the connecting rod is on the opposite side from the camshaft.3. Install the bearing cap on the connecting rod with the number on the side of the bearing cap on the same side and same number as on the connecting rod.4. Put 2P2506 Thread Lubricant on the threads of the bolts. Install the nuts, and tighten them to a torque of 90 8 N m (67 6 lb.ft.). Put a mark on the nuts and cap, and tighten the nuts an extra 90 ° 5 °.5. Do Steps 1 through 4 for the remainder of the pistons and connecting rods.End By:a. install oil pumpb. install cylinder head assemblyc. install piston cooling tubesDisassemble & Assemble Pistons And Connecting Rod Assemblies
Start By:a. remove pistons and connecting rod assemblies 1. Remove bearings (3) from the connecting rod and connecting rod cap.2. Remove retainer ring (1) with tool (A).3. Remove pin (2) and connecting rod (4) from the piston. 4. Remove piston rings (5) from

Have questions with 09340-00950?





Group cross 09340-00950

Back to top