Buy 09340-00060 NOZZLE ASSY Denso Cross


 

Information nozzle assy

ZEXEL 105000-1010
CAV 5641015
CAV 5641870
Nozzle Type: ND-DN0SD21
DAIHATSU DELTA V20
DAIHATSU INDUSTRIAL 2PK
DAIHATSU INDUSTRIAL 4VK8.8
DAIHATSU INDUSTRIAL D200
MITSUBISHI INDUSTRIAL 4DQ
MITSUBISHI INDUSTRIAL KE250
MITSUBISHI INDUSTRIAL KE31
MITSUBISHI INDUSTRIAL KE65
MITSUBISHI INDUSTRIAL S4E
MITSUBISHI INDUSTRIAL SDT65
09340-00060 NOZZLE ASSY
Rating:
10
Buy NOZZLE ASSY 09340-00060 genuine, new aftermarket engine parts with delivery

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below
$23.98

17 Feb 2025

CN: KEEPTOP
DNOSD21 Fuel Injector Nozzle 0434250001 105000-1010 093400-0060 fits HATZ Engine 4pcs/lot
KEEPTOP Part Number:DNOSD21,0434250001, 093400-0060 || fits Case Deutz IFA Delphi HATZ Engine || 100% Brand New And High Quality Parts ! || Manufacture outlet.Made High-quality material for long-lasting durability. || Easy to install and replace the old or stock one, great for install replacement.
$27.31

26 Oct 2024

KR: Adabus
SD Type Nozzle DN0SD21 DNOSD21 093400-0060 for Diesel Injector 4 Pieces
Generic
$28.69
 

09 Aug 2024

RU: Udith
SD type nozzle DN0SD21 DNOSD21 093400-0060 For diesel injector 4 pieces
Generic

You can express buy:

USD 2.5
12-11-2023
BDN0SD21 diesel injector spray nozzle DN0SD21 0434250001 / 093400-0060 / 105000-1010
USD 3.96
20-06-2019
diesel injector sprayer nozzle DN0SD21 BDN0SD21 0434250001 / 093400-0060 / 105000-1010
USD 3.96
20-06-2019
4PCS/LOT Fuel injection system nozzle DN0SD21 BDN0SD21 0434250001 / 093400-0060 / 105000-1010
Images:
US $4.00
Good Quality Nozzle DN0SD21 093400-0060 105000-1010
[10-Apr-2017]

Cross reference number



Part num Firm num Firm Name
09340-00060  23620-8730  NOZZLE ASSY
23620-87301-000    DAIHATSU NOZZLE ASSY
0 934 0000 60    HINO NOZZLE ASSY
MM100118    MITSUBISHI NOZZLE ASSY
P811-8212    MITSUBISHI NOZZLE ASSY




Information:


TIMING PIN HOLE PLUG (Typical Example)
1. Plug.2. Rotate the crankshaft CLOCKWISE (as viewed from front of engine) until the timing pin drops into the timing slot in the fuel injection pump camshaft.3. Disconnect wire (2) from fuel shut off solenoid.
WIRE AND HOUSING
2. Wire. 3. Tachometer drive adapter housing.4. Remove the tachometer drive adapter housing (3).5. Use ratchet (4) and socket (5) to loosen automatic timing advance unit from fuel injection pump camshaft. Back off retaining bolt. The bolt will feel loose, then tighten up again when taper starts to separate from the camshaft.
REMOVING RETAINING BOLT
4. 8H8572 Ratchet. 5. 8S2357 Deep Well Socket.6. Remove the plug from timing hole (7) in the front cover and insert bolt (6). The cover retaining bolt from hole (8) may be used.
INSTALLING BOLT
6. 1D4539 Bolt [5/16 in. - 18 NC, 2.5 in. (63,5 mm) long]. 7. Timing hole. 8. Hole.7. Rotate crankshaft CLOCKWISE (as viewed from front of engine) until bolt (6) threads into the timing gear and is centered in timing hole (7). With timing pin in slot in fuel pump camshaft and the bolt (6) through the front cover and threaded into the timing gear, the fuel injection pump camshaft is timed to the engine.8. Remove the fuel injection pump housing retaining bolts (9).
RETAINING BOLTS
9. Retaining bolts.9. Remove the fuel injection pump housing and governor as a unit.
REMOVING HOUSINGInstall Fuel Injection Pump Housing and Governor
1. Install the fuel injection pump housing and governor as a unit. Install the fuel injection pump housing retaining bolts.2. Install the automatic timing advance unit retaining bolt and tighten retaining bolt to 35 2 lb. ft. (4.8 0.3 mkg).3. To check timing remove the timing pin and the bolt. Rotate the crankshaft two revolutions CLOCKWISE (as viewed from front of engine) and install the timing pin and bolt back in place. If the timing pin or bolt can not be installed, the fuel injection pump camshaft must be retimed.4. Remove the bolt (6) from the timing gear and install in hole (8). Install the plug into timing hole (7).5. Remove the timing pin from the timing slot in the fuel injection pump camshaft and install the plug in the timing hole.6. Install the tachometer drive adapter housing. Connect the wire to the fuel shut off solenoid.Disassemble Max-Min Governor
MAX-MIN GOVERNOR DISASSEMBLED
1. Seal. 2. Link. 3. Yoke. 4. Coned disc washer. 5. Washer.Assemble Max-Min Governor
MAX-MIN GOVERNOR
1. Seal. 2. Link. 3. Yoke. 4. Coned disc washer. 5. Washer.Install seal (1) with lip facing toward inside of governor housing.Link (2) must turn freely on yoke (3).Install coned disc washer (4) with concave side toward washer (5). The 1160 Engines, 5.0 in. (127.0 mm) stroke, do not have washer (4).
After disassembly and assembly, use the following initial settings to protect the engine from overspeed.
Disassemble Hydraulic Governor (9L9540 Governor)
HYDRAULIC GOVERNOR DISASSEMBLED
1. Seal. 2. Seal. 3. Weights.Assemble Hydraulic Governor (9L9540 Governor)
HYDRAULIC GOVERNOR
1. Seal. 2. Seal. 3. Weights.Lubricate seal (1) and all adjoining surfaces with clean engine oil (SAE 30).Install seal (2)

Have questions with 09340-00060?





Group cross 09340-00060

Back to top