105952-0910 ZEXEL 9 420 613 250 BOSCH ACTUATOR 9420613250 1059520910


 

Information actuator

BOSCH 9 420 613 250 9420613250
ZEXEL 105952-0910 1059520910
105952-0910 ACTUATOR
Rating:
55
Buy ACTUATOR 105952-0910 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

1. [1] 159560-0100 GOVERNOR HOUSING
2. [8] 139006-4100 BLEEDER SCREW
3. [1] 029621-7050 PACKING RING
4. [1] 159564-0000 COILED SPRING
5. [1] 159564-4000 SLOTTED WASHER
6. [1] 159564-4100 SLOTTED WASHER
7. [1] 159564-7321 CONNECTOR
8. [1] 020105-1240 BLEEDER SCREW M5P0.8L12
9. [1] 159564-0501 PLATE
9B. [1] 159564-6500 PLATE
9C. [1] 159584-5200 PLATE
10. [1] 020105-1240 BLEEDER SCREW M5P0.8L12
11. [1] 159569-0920 ACTUATOR
12. [2] 020106-4040 BLEEDER SCREW
13. [1] 159561-0400 GOVERNOR COVER
14. [4] 010006-7040 BLEEDER SCREW M6P1L70
15. [2] 010006-5540 BLEEDER SCREW M6P1L55 4T
16. [8] 014110-6440 LOCKING WASHER
16. [8] 014110-6440 LOCKING WASHER
16. [8] 014110-6440 LOCKING WASHER
16. [8] 014110-6440 LOCKING WASHER
17. [1] 154371-5600 GASKET
18. [1] 154390-0400 GASKET
19. [1] 154390-0500 GASKET
20. [1] 153021-3120 STOPPING DEVICE
21. [1] 026524-3040 GASKET
22. [1] 029731-4680 EYE BOLT
23. [2] 029341-4130 GASKET D20&13.8T2*
27. [2] 139006-1300 BLEEDER SCREW M6P1L76
80. [1] 159564-8600 TOOTHED GEAR
81. [1] 014111-2420 LOCKING WASHER
82. [1] 013031-2120 UNION NUT
83. [1] 025803-1310 WOODRUFF KEY
900S. [1] 025803-1310 WOODRUFF KEY
901S. [1] 025803-1610 WOODRUFF KEY

Include in #1:

106675-4090 as GOVERNOR

Cross reference number

Zexel num
Bosch num
Firm num
Name
105952-0910 
9 420 613 250 
   
ACTUATOR
* K




Information:

1. Remove tube and elbow (1).2. Remove tube and oil sump (2). 3. Turn the crankshaft until two of the pistons are at top center and two are at bottom center.
Put identification marks on the connecting rod caps as to their location in the engine. Keep the caps with their respective piston.
4. Remove nuts (3), and remove connecting rod bearing cap (4).5. Remove the lower bearing half from the connecting rod cap. Push the connecting rod away from the crankshaft, and remove the upper bearing half.
Use tape to hold the bearing halves together and to identify the number of the cylinder.
6. Install the upper bearings in the connecting rods. Be sure the tab on the back of the bearing fits in the groove of the connecting rod. Install the connecting rod bearings dry when the clearance checks are made. Put clean engine oil on the connecting rod bearings for final assembly.7. Carefully pull the connecting rods onto the crankshaft.8. Install the lower bearings in the connecting rod caps. Be sure the tab on the back of the bearing fits the groove of the cap.9. Check the bearing clearance with Plastigage as follows:a. Put clean oil on the connecting rod bolt threads.b. Align the number on bearing cap (4) with the number on the connecting rod, and install bearing cap (4) with a line of Plastigage across the bearing.c. Install the nuts finger tight; then tighten them to a torque of 100 N m (75 lb.ft.).d. Remove the connecting rod cap, and measure the thickness of the Plastigage to the bearing clearances. See Engine Specifications for correct bearing clearances.e. Carefully move the connecting rod up enough to permit clean engine oil to be put on the upper bearing and crankshaft journal.f. Carefully pull the connecting rod onto the crankshaft.g. Install connecting rod cap (4), and tighten the nuts to the proper torque. The Cadmium plated nuts (silver color) are to be tightened to a torque of 100 N m (75 lb.ft.). The Phosphated nuts (dull black color) are to be tightened to a torque of 130 N m (95 lb.ft.).h. Repeat the procedure for the remainder of the connecting rods.10. Install tube and elbow (1) and tube and oil sump (2).End By:a. install oil pan

Have questions with 105952-0910?





Group cross 105952-0910 ZEXEL

 
 

105952-0910  
9 420 613 250 
 
ACTUATOR

Mitsubishi 

 
ME731891 
ACTUATOR
9 420 613 654 
ME731964 
ACTUATOR
 
ME731881 
ACTUATOR
 
ME731966 
ACTUATOR
9 420 611 068 
ME738719 
ACTUATOR
9 420 613 871 
ME731888 
ACTUATOR
9 420 612 482 
 
ACTUATOR
 
 

9 420 614 765 
 
ACTUATOR

Mitsubishi 

 
ME731950 
ACTUATOR
9 420 612 210 
ME738467 
ACTUATOR
 
ME731942 
ACTUATOR
9 420 612 211 
ME738716 
ACTUATOR
Back to top